Other Name: Motor Assembly, Power Window Regulator; Motor, Center Left, Front Left, Rear Left, Rear Right; Door Lock Actuator; Motor; Power Window Regulator Assembly for Front Driver, Passenger, and Driver Side.
Replaces: 85720-35140
Item Weight: 1.30 Pounds
Item Dimensions: 7.4 x 4.6 x 4.3 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 85720-AE010
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Other Name: Motor Assembly, Power Window Regulator; Center Right, Front Right, Rear Left, Rear Right, Right; Motor; Power Window Regulator Assembly for Front Passenger, Driver, and Passenger Side.
Replaces: 85710-35180
Item Weight: 1.30 Pounds
Item Dimensions: 7.7 x 4.7 x 4.4 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 85710-AE010
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Other Name: Motor Assembly, Power Window Regulator; Power Window Motor, Front Left, Rear Right; Door Lock Actuator Motor; Motor Assembly, Power Window Regulator, Passenger Side; Driver Side; Power Window Motor
Replaces: 85720-58010
Item Weight: 1.40 Pounds
Item Dimensions: 8.0 x 5.8 x 2.7 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 85720-AE020
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2010 Scion xD Submodels:
Base | 4 Cyl 1.8 L GAS
2010 Scion xD Window Motor
Looking for affordable OEM 2010 Scion xD Window Motor? Explore our comprehensive catalogue of genuine 2010 Scion xD Window Motor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2010 Scion xD Parts Questions & Experts Answers
Q: How do you remove the Window Motor on 2010 Scion xD?
A: The first step to remove the power window regulator motor requires disconnecting the battery cable from its negative terminal. Start by taking off the RH side parts which include front armrest base upper panel, front door lower frame bracket garnish, front door inside handle bezel, front door trim board sub-assembly, front door trim bracket, front door service hole cover, front door glass sub-assembly as well as front door window regulator sub-assembly. A "TORX" socket wrench T25 tool should be used to remove the 3 screws which fasten the front power window regulator motor assembly. The process for the rear door requires removal of the rear door armrest base upper panel followed by disconnection of the rear door inside handle bezel and the rear door trim board sub-assembly and rear door trim bracket and rear door service hole cover and rear door glass run. You must detach the rear window Weather Strip before reaching the screw on the upper section of the rear door window division bar and then remove the 2 bolts and screw to detach the rear door window division bar while avoiding any drops or damage to the part. After removing the rear door glass sub-assembly and rear door window regulator sub-assembly the operator should use a "TORX" socket wrench T25 to detach the rear power window regulator motor assembly by removing its 3 screws.