How to remove the parking brake cable on 2008 Toyota Tacoma?

The initial step before removing the parking brake cable is disconnecting the negative side of the battery while waiting 90 seconds to stop Air Bag deployment. Proceed with removing the console upper rear panel sub-assembly for automatic and manual transmissions from distinct seat types before uninstalling the rear console box assembly under the same conditions. The instrument panel cup holder tray together with the front console box must be removed on each transmission type with their distinct and bench seating setup. The subsequent step requires the removal of the center Air Bag sensor assembly and the voltage inverter assembly after disturbing the 6 bolts and detaching the 2 connectors and 2 wire harness clamps. Bench seat owners should remove the parking brake cable joint protector first and afterward eliminate the rear wheel together with the rear brake drum sub-assemblies. Proceed to eliminate both brake shoes from the front and rear sections. To access parking brake cable assembly No. 1 on automatic transmission start by freeing the parking brake then removing the claw before taking out the lock nut and adjusting nut and clip to allow disconnecting of the cable from the parking brake control pedal. To remove the cable disconnect the 4 nuts along with 2 clamps and 2 bolts followed by taking off the lock nut with the adjusting nut and cable from the parking brake equalizer. You must disconnect the parking brake cable from the brake lever by releasing the parking brake lever first followed by clip disengagement to remove the pin before splitting the sleeve. Start by removing 2 nuts combined with 2 clamps and 2 bolts that connect to the cable before taking off the lock nut, adjusting nut and cable from the parking brake equalizer. The third parking brake cable assembly requires removal of 2 bolts followed by disconnecting the cable from the backing plate before removing the 4 bolts from the cable to disengage the clip from the parking brake equalizer.

OEM 2008 Toyota Tacoma Parking Brake Cable

Emergency Parking Brake Release Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

14 Parking Brake Cables found

View related parts
2008 Toyota Tacoma Rear Cable
Part Number: 46420-04071
$89.22 MSRP: $125.23
You Save: $36.01 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable; Cable Assembly, Parking Brake
- Replaces: 46420-04070
- Part Name Code: 46420
- Item Weight: 2.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 46420-04071
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tacoma Submodels:
- Base | 4 Cyl 2.7 L GAS
View related parts
2008 Toyota Tacoma Rear Cable
Part Number: 46430-04071
$106.64 MSRP: $149.69
You Save: $43.05 (29%)
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable; Cable Assembly, Parking Brake
- Replaces: 46430-04070
- Part Name Code: 46430
- Item Weight: 2.30 Pounds
- Item Dimensions: 24.7 x 12.2 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 46430-04071
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tacoma Submodels:
- Base, Pre Runner, TRD Pro, X-Runner | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
2008 Toyota Tacoma Rear Cable
Part Number: 46420-04101
$93.60 MSRP: $131.39
You Save: $37.79 (29%)
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable; Cable Assembly, Parking Brake
- Replaces: 46420-04100
- Part Name Code: 46420
- Item Weight: 5.20 Pounds
- Item Dimensions: 28.3 x 20.4 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 46420-04101
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tacoma Submodels:
- Base, Pre Runner, TRD Pro, X-Runner | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
2008 Toyota Tacoma Front Cable
Part Number: 46410-04040
$53.52 MSRP: $74.50
You Save: $20.98 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable; Cable Assembly, Parking Brake
- Part Name Code: 46410
- Item Weight: 2.40 Pounds
- Item Dimensions: 50.5 x 7.2 x 7.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 46410-04040
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tacoma Submodels:
- Base, Pre Runner, TRD Pro, X-Runner | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
2008 Toyota Tacoma Front Cable
Part Number: 46410-04030
$67.53 MSRP: $94.80
You Save: $27.27 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable; Cable Assembly, Parking Brake
- Part Name Code: 46410
- Item Weight: 2.00 Pounds
- Item Dimensions: 15.5 x 11.6 x 2.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 46410-04030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tacoma Submodels:
- Base, Pre Runner, TRD Pro, X-Runner | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
2008 Toyota Tacoma Rear Cable
Part Number: 46430-04091
$104.51 MSRP: $146.69
You Save: $42.18 (29%)
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable; Cable Assembly, Parking Brake
- Replaces: 46430-04090
- Part Name Code: 46430
- Item Weight: 3.10 Pounds
- Item Dimensions: 56.1 x 4.1 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 46430-04091
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tacoma Submodels:
- Base, TRD Pro | 6 Cyl 4.0 L GAS
View related parts
2008 Toyota Tacoma Rear Cable
Part Number: 46430-04081
$99.88 MSRP: $140.20
You Save: $40.32 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable; Cable Assembly, Parking Brake
- Replaces: 46430-04080
- Part Name Code: 46430
- Item Weight: 2.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 46430-04081
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tacoma Submodels:
- Base, Pre Runner, X-Runner | 6 Cyl 4.0 L GAS
View related parts
2008 Toyota Tacoma Rear Cable
Part Number: 46420-04111
$97.75 MSRP: $137.21
You Save: $39.46 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable; Cable Assembly, Parking Brake
- Replaces: 46420-04110
- Part Name Code: 46420
- Item Weight: 2.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 46420-04111
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tacoma Submodels:
- Base, Pre Runner, X-Runner | 6 Cyl 4.0 L GAS
View related parts
2008 Toyota Tacoma Rear Cable
Part Number: 46430-04051
$94.67 MSRP: $132.88
You Save: $38.21 (29%)
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable; Cable Assembly, Parking Brake
- Replaces: 46430-04050
- Part Name Code: 46430
- Item Weight: 2.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 46430-04051
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tacoma Submodels:
- Base, Pre Runner | 4 Cyl 2.7 L GAS
View related parts
2008 Toyota Tacoma Rear Cable
Part Number: 46430-04061
$91.11 MSRP: $127.90
You Save: $36.79 (29%)
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable; Cable Assembly, Parking Brake
- Replaces: 46430-04060
- Part Name Code: 46430
- Item Weight: 2.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 46430-04061
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tacoma Submodels:
- Base, X-Runner | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
2008 Toyota Tacoma Rear Cable
Part Number: 46420-04091
$91.11 MSRP: $127.90
You Save: $36.79 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable; Cable Assembly, Parking Brake
- Replaces: 46420-04090
- Part Name Code: 46420
- Item Weight: 2.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 46420-04091
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tacoma Submodels:
- Base, X-Runner | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
2008 Toyota Tacoma Rear Cable
Part Number: 46430-04041
$89.22 MSRP: $125.23
You Save: $36.01 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable; Cable Assembly, Parking Brake
- Replaces: 46430-04040
- Part Name Code: 46430
- Item Weight: 2.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 46430-04041
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tacoma Submodels:
- Base | 4 Cyl 2.7 L GAS
View related parts
2008 Toyota Tacoma Rear Cable
Part Number: 46420-04121
$96.57 MSRP: $135.55
You Save: $38.98 (29%)
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable; Cable Assembly, Parking Brake
- Replaces: 46420-04120
- Part Name Code: 46420
- Item Weight: 2.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 46420-04121
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tacoma Submodels:
- Base, TRD Pro | 6 Cyl 4.0 L GAS
View related parts
2008 Toyota Tacoma Rear Cable
Part Number: 46420-04081
$89.22 MSRP: $125.23
You Save: $36.01 (29%)
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable; Cable Assembly, Parking Brake
- Replaces: 46420-04080
- Part Name Code: 46420
- Item Weight: 2.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 46420-04081
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tacoma Submodels:
- Base, Pre Runner | 4 Cyl 2.7 L GAS

2008 Toyota Tacoma Parking Brake Cable

Looking for affordable OEM 2008 Toyota Tacoma Parking Brake Cable? Explore our comprehensive catalogue of genuine 2008 Toyota Tacoma Parking Brake Cable. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota Tacoma Parking Brake Cable Parts Q&A

Q: How to remove the parking brake cable on 2008 Toyota Tacoma?
A: The initial step before removing the parking brake cable is disconnecting the negative side of the battery while waiting 90 seconds to stop Air Bag deployment. Proceed with removing the console upper rear panel sub-assembly for automatic and manual transmissions from distinct seat types before uninstalling the rear console box assembly under the same conditions. The instrument panel cup holder tray together with the front console box must be removed on each transmission type with their distinct and bench seating setup. The subsequent step requires the removal of the center Air Bag sensor assembly and the voltage inverter assembly after disturbing the 6 bolts and detaching the 2 connectors and 2 wire harness clamps. Bench seat owners should remove the parking brake cable joint protector first and afterward eliminate the rear wheel together with the rear brake drum sub-assemblies. Proceed to eliminate both brake shoes from the front and rear sections. To access parking brake cable assembly No. 1 on automatic transmission start by freeing the parking brake then removing the claw before taking out the lock nut and adjusting nut and clip to allow disconnecting of the cable from the parking brake control pedal. To remove the cable disconnect the 4 nuts along with 2 clamps and 2 bolts followed by taking off the lock nut with the adjusting nut and cable from the parking brake equalizer. You must disconnect the parking brake cable from the brake lever by releasing the parking brake lever first followed by clip disengagement to remove the pin before splitting the sleeve. Start by removing 2 nuts combined with 2 clamps and 2 bolts that connect to the cable before taking off the lock nut, adjusting nut and cable from the parking brake equalizer. The third parking brake cable assembly requires removal of 2 bolts followed by disconnecting the cable from the backing plate before removing the 4 bolts from the cable to disengage the clip from the parking brake equalizer.

Alternate Year Models

2007 Toyota Tacoma Parking Brake Cable 2009 Toyota Tacoma Parking Brake Cable