How to install the parking brake cable assembly No. 3 and related components on 2009 Toyota Tacoma?

The cable assembly installation begins with attaching the cable with clip to the parking brake equalizer then using 4 bolts torqued at 13 Nm (127 kgf-cm, 9 ft-lbf) to fix the equalizer followed by securing the backing plate with 2 bolts torques at 8.0 Nm (82 kgf-cm, 71 in-lbf). The installation of parking brake cable assembly No. 1 (automatic transmission) requires first adjusting and locking nuts B and A then attaching the cable with 4 A nuts and 2 B clamps and 2 C bolts where Nut A reaches 6.0 Nm (61 kgf-cm, 53 in-lbf) torque while Bolt C requires 13 Nm (127 kgf-cm, 9 ft-lbf). Affix the vehicle cable to the parking brake control pedal with a clip marked (D), an adjusting nut denoted (C), and a lock nut described (B). Secure these components when tightened to 5.4 Nm (55 kgf-cm, 48 in-lbf) while bending the claw component (A). The cable installation for manual transmission requires first placing the adjusting (labeled B) and lock nut (labeled A) loosely then adding two A nuts and two B clamps and two C bolts which must be tightened to 6.0 Nm (61 kgf-cm, 53 in-lbf) for A nut and to 13 Nm (127 kgf-cm, 9 ft-lbf) for C bolt. The parking brake lever accepts the cable through a clip before installing the sleeve using its pin combined with the clip. After applying high-temperature grease the mechanic must install the rear brake shoe followed by installing the front brake shoe before checking the rear drum brake installation and putting in the rear brake drum sub-assembly and lastly adjusting the rear drum brake shoe clearance. The rear wheel needs installation followed by torque application to 113 Nm (1152 kgf-cm, 83 ft-lbf) and the parking brake cable joint protector (for bench seat type) needs installation. To install the voltage inverter assembly with its inverter (using 2 connectors) you must also install wire harness clamps then stabilize them with 6 bolts torqued to A: 7.5 Nm (76 kgf-cm, 66 in-lbf) and B: 15 Nm (153 kgf-cm, 11 ft-lbf). Install the center Air Bag sensor assembly then add the front console box for automatic or manual transmission on separate seats or 3-seater models followed by the instrument panel cup holder tray designed for automatic-shifting separate seats and the rear console box assembly used for separate seats and finally place the console upper rear panel sub-assembly that fits both automatic and manual transmissions on separate seats. The procedure ends with the addition of the negative battery cable and 3.9 Nm torque specification. Afterward, check the SRS warning light, test the automatic transmission parking brake pedal travel and manual transmission parking brake lever travel, then adjust the said components.

OEM 2009 Toyota Tacoma Parking Brake Cable

Emergency Parking Brake Release Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

14 Parking Brake Cables found

View related parts
2009 Toyota Tacoma Rear Cable
Part Number: 46420-04071
$89.22 MSRP: $125.23
You Save: $36.01 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable; Cable Assembly, Parking Brake
- Replaces: 46420-04070
- Part Name Code: 46420
- Item Weight: 2.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 46420-04071
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Tacoma Submodels:
- Base | 4 Cyl 2.7 L GAS
View related parts
2009 Toyota Tacoma Rear Cable
Part Number: 46430-04071
$106.64 MSRP: $149.69
You Save: $43.05 (29%)
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable; Cable Assembly, Parking Brake
- Replaces: 46430-04070
- Part Name Code: 46430
- Item Weight: 2.30 Pounds
- Item Dimensions: 24.7 x 12.2 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 46430-04071
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Tacoma Submodels:
- Base, Pre Runner, TRD Pro, X-Runner | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
2009 Toyota Tacoma Rear Cable
Part Number: 46420-04101
$93.60 MSRP: $131.39
You Save: $37.79 (29%)
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable; Cable Assembly, Parking Brake
- Replaces: 46420-04100
- Part Name Code: 46420
- Item Weight: 5.20 Pounds
- Item Dimensions: 28.3 x 20.4 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 46420-04101
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Tacoma Submodels:
- Base, Pre Runner, TRD Pro, X-Runner | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
2009 Toyota Tacoma Front Cable
Part Number: 46410-04040
$53.52 MSRP: $74.50
You Save: $20.98 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable; Cable Assembly, Parking Brake
- Part Name Code: 46410
- Item Weight: 2.40 Pounds
- Item Dimensions: 50.5 x 7.2 x 7.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 46410-04040
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Tacoma Submodels:
- Base, Pre Runner, TRD Pro, X-Runner | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
2009 Toyota Tacoma Front Cable
Part Number: 46410-04030
$67.53 MSRP: $94.80
You Save: $27.27 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable; Cable Assembly, Parking Brake
- Part Name Code: 46410
- Item Weight: 2.00 Pounds
- Item Dimensions: 15.5 x 11.6 x 2.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 46410-04030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Tacoma Submodels:
- Base, Pre Runner, TRD Pro, X-Runner | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
2009 Toyota Tacoma Rear Cable
Part Number: 46430-04091
$104.51 MSRP: $146.69
You Save: $42.18 (29%)
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable; Cable Assembly, Parking Brake
- Replaces: 46430-04090
- Part Name Code: 46430
- Item Weight: 3.10 Pounds
- Item Dimensions: 56.1 x 4.1 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 46430-04091
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Tacoma Submodels:
- Base, TRD Pro | 6 Cyl 4.0 L GAS
View related parts
2009 Toyota Tacoma Rear Cable
Part Number: 46430-04081
$99.88 MSRP: $140.20
You Save: $40.32 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable; Cable Assembly, Parking Brake
- Replaces: 46430-04080
- Part Name Code: 46430
- Item Weight: 2.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 46430-04081
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Tacoma Submodels:
- Base, Pre Runner, X-Runner | 6 Cyl 4.0 L GAS
View related parts
2009 Toyota Tacoma Rear Cable
Part Number: 46420-04111
$97.75 MSRP: $137.21
You Save: $39.46 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable; Cable Assembly, Parking Brake
- Replaces: 46420-04110
- Part Name Code: 46420
- Item Weight: 2.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 46420-04111
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Tacoma Submodels:
- Base, Pre Runner, X-Runner | 6 Cyl 4.0 L GAS
View related parts
2009 Toyota Tacoma Rear Cable
Part Number: 46420-04121
$96.57 MSRP: $135.55
You Save: $38.98 (29%)
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable; Cable Assembly, Parking Brake
- Replaces: 46420-04120
- Part Name Code: 46420
- Item Weight: 2.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 46420-04121
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Tacoma Submodels:
- Base, TRD Pro | 6 Cyl 4.0 L GAS
View related parts
2009 Toyota Tacoma Rear Cable
Part Number: 46430-04051
$94.67 MSRP: $132.88
You Save: $38.21 (29%)
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable; Cable Assembly, Parking Brake
- Replaces: 46430-04050
- Part Name Code: 46430
- Item Weight: 2.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 46430-04051
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Tacoma Submodels:
- Base, Pre Runner | 4 Cyl 2.7 L GAS
View related parts
2009 Toyota Tacoma Rear Cable
Part Number: 46430-04061
$91.11 MSRP: $127.90
You Save: $36.79 (29%)
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable; Cable Assembly, Parking Brake
- Replaces: 46430-04060
- Part Name Code: 46430
- Item Weight: 2.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 46430-04061
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Tacoma Submodels:
- Base, X-Runner | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
2009 Toyota Tacoma Rear Cable
Part Number: 46420-04091
$91.11 MSRP: $127.90
You Save: $36.79 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable; Cable Assembly, Parking Brake
- Replaces: 46420-04090
- Part Name Code: 46420
- Item Weight: 2.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 46420-04091
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Tacoma Submodels:
- Base, X-Runner | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
2009 Toyota Tacoma Rear Cable
Part Number: 46430-04041
$89.22 MSRP: $125.23
You Save: $36.01 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable; Cable Assembly, Parking Brake
- Replaces: 46430-04040
- Part Name Code: 46430
- Item Weight: 2.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 46430-04041
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Tacoma Submodels:
- Base | 4 Cyl 2.7 L GAS
View related parts
2009 Toyota Tacoma Rear Cable
Part Number: 46420-04081
$89.22 MSRP: $125.23
You Save: $36.01 (29%)
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable; Cable Assembly, Parking Brake
- Replaces: 46420-04080
- Part Name Code: 46420
- Item Weight: 2.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 46420-04081
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Tacoma Submodels:
- Base, Pre Runner | 4 Cyl 2.7 L GAS

2009 Toyota Tacoma Parking Brake Cable

Looking for affordable OEM 2009 Toyota Tacoma Parking Brake Cable? Explore our comprehensive catalogue of genuine 2009 Toyota Tacoma Parking Brake Cable. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2009 Toyota Tacoma Parking Brake Cable Parts Q&A

Q: How to install the parking brake cable assembly No. 3 and related components on 2009 Toyota Tacoma?
A: The cable assembly installation begins with attaching the cable with clip to the parking brake equalizer then using 4 bolts torqued at 13 Nm (127 kgf-cm, 9 ft-lbf) to fix the equalizer followed by securing the backing plate with 2 bolts torques at 8.0 Nm (82 kgf-cm, 71 in-lbf). The installation of parking brake cable assembly No. 1 (automatic transmission) requires first adjusting and locking nuts B and A then attaching the cable with 4 A nuts and 2 B clamps and 2 C bolts where Nut A reaches 6.0 Nm (61 kgf-cm, 53 in-lbf) torque while Bolt C requires 13 Nm (127 kgf-cm, 9 ft-lbf). Affix the vehicle cable to the parking brake control pedal with a clip marked (D), an adjusting nut denoted (C), and a lock nut described (B). Secure these components when tightened to 5.4 Nm (55 kgf-cm, 48 in-lbf) while bending the claw component (A). The cable installation for manual transmission requires first placing the adjusting (labeled B) and lock nut (labeled A) loosely then adding two A nuts and two B clamps and two C bolts which must be tightened to 6.0 Nm (61 kgf-cm, 53 in-lbf) for A nut and to 13 Nm (127 kgf-cm, 9 ft-lbf) for C bolt. The parking brake lever accepts the cable through a clip before installing the sleeve using its pin combined with the clip. After applying high-temperature grease the mechanic must install the rear brake shoe followed by installing the front brake shoe before checking the rear drum brake installation and putting in the rear brake drum sub-assembly and lastly adjusting the rear drum brake shoe clearance. The rear wheel needs installation followed by torque application to 113 Nm (1152 kgf-cm, 83 ft-lbf) and the parking brake cable joint protector (for bench seat type) needs installation. To install the voltage inverter assembly with its inverter (using 2 connectors) you must also install wire harness clamps then stabilize them with 6 bolts torqued to A: 7.5 Nm (76 kgf-cm, 66 in-lbf) and B: 15 Nm (153 kgf-cm, 11 ft-lbf). Install the center Air Bag sensor assembly then add the front console box for automatic or manual transmission on separate seats or 3-seater models followed by the instrument panel cup holder tray designed for automatic-shifting separate seats and the rear console box assembly used for separate seats and finally place the console upper rear panel sub-assembly that fits both automatic and manual transmissions on separate seats. The procedure ends with the addition of the negative battery cable and 3.9 Nm torque specification. Afterward, check the SRS warning light, test the automatic transmission parking brake pedal travel and manual transmission parking brake lever travel, then adjust the said components.

Related 2009 Toyota Tacoma Parts

Alternate Year Models

2008 Toyota Tacoma Parking Brake Cable 2010 Toyota Tacoma Parking Brake Cable