How to install the brake master cylinder on 2009 Toyota Tacoma?

Before installing the brake master cylinder check and modify the brake booster push rod according to specifications while verifying that brake booster interior remains empty from vacuum atmosphere by stopping the engine then pressing the brake pedal multiple times. Latch Special Service Tool: 09737-00013 onto the master cylinder sub-assembly before dropping the pin until the piston gets a minimal contact. Special Service Tool: 09737-00012 provides an alternative option to perform the task. Set Special Service Tool: 09737-00013 upside down onto the booster with its pin resting on the booster push rod while checking the clearance between the rod and the pin for a 0 mm (0 in.) standard measurement. Use Special Service Tool: 09737-00020 while holding the rod to alter the presentation by turning the tip using a 7 mm socket driver. The procedure involves installation of a new O-ring onto the brake master cylinder sub-assembly and its securement to the brake booster through tightening 2 nuts to 13 Nm (127 kgf-cm, 9 ft-lbf). Use a union nut wrench to apply torque of 20 Nm (199 kgf cm, 14 ft lbf) directly or 18 Nm (187 kgf cm, 13 ft lbf) when using the wrench when installing brake lines onto the master cylinder sub-assembly. The brake fluid level warning switch connector should be attached to the brake master cylinder sub-assembly while connecting the clutch reservoir tube to the manual transmission reservoir. Use a torque wrench to reattach the negative battery terminal with a force of 3.9 Nm but not exceeding 40 kgf-cm or 35 in-lbf. Brake fluid should be added to the reservoir after which the master cylinder bleeding process includes the brake line and brake actuator followed by a fluid level inspection of the reservoir. The last step involves checking for brake fluid leaks before inspecting brake pedal height along with free play and reserve distance.

OEM 2009 Toyota Tacoma Brake Master Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Brake Master Cylinders found

View related parts
2009 Toyota Tacoma Master Cylinder
Part Number: 47201-04170
$130.06 MSRP: $184.12
You Save: $54.06 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Sub-Assembly, Brake Stroke Simulator; Brake Master Cylinder; Cylinder Sub-Assembly, Brake Master
- Replaces: 47201-04150
- Part Name Code: 47201
- Item Weight: 4.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 47201-04170
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Tacoma Submodels:
- Base, Limited, Pre Runner, SR, SR5, Trail, Trail Special Edition, TRD Off-Road, TRD Pro, TRD Sport, X-Runner | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 4.0 L GAS
View related parts
2009 Toyota Tacoma Master Cylinder
Part Number: 47028-04040
$292.64 MSRP: $417.82
You Save: $125.18 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Sub-Assembly, Brake Stroke Simulator; Brake Master Cylinder; Cylinder Sub-Assembly, Brake Master W/Plate
- Part Name Code: 47028
- Item Weight: 2.40 Pounds
- Item Dimensions: 10.1 x 7.7 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 47028-04040
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Tacoma Submodels:
- Base, Pre Runner, X-Runner | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
2009 Toyota Tacoma Master Cylinder
Part Number: 47028-04030
$246.04 MSRP: $351.28
You Save: $105.24 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Sub-Assembly, Brake Stroke Simulator; Brake Master Cylinder; Cylinder Sub-Assembly, Brake Master W/Plate
- Manufacturer Note: MEXICO SPEC(W/O (VSC, SIDE & *CUSA))
- Part Name Code: 47028
- Item Weight: 2.40 Pounds
- Item Dimensions: 12.2 x 7.4 x 7.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 47028-04030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Tacoma Submodels:
- Base, Pre Runner, X-Runner | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
2009 Toyota Tacoma Master Cylinder
Part Number: 47201-04180
$130.06 MSRP: $184.12
You Save: $54.06 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Sub-Assembly, Brake Stroke Simulator; Brake Master Cylinder; Cylinder Sub-Assembly, Brake Master
- Replaces: 47201-04160
- Part Name Code: 47201
- Item Weight: 3.20 Pounds
- Item Dimensions: 9.5 x 9.2 x 7.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 47201-04180
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Tacoma Submodels:
- Base, Limited, Pre Runner, SR, SR5, Trail, Trail Special Edition, TRD Off-Road, TRD Pro, TRD Sport, X-Runner | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 4.0 L GAS
View related parts
2009 Toyota Tacoma Master Cylinder
Part Number: 47025-04040
$1256.76 MSRP: $1841.79
You Save: $585.03 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Sub-Assembly; Brake Master Cylinder; Cylinder Sub-Assembly, Brake Master
- Manufacturer Note: VSC-WITH(W/AUTO LSD)
- Part Name Code: 47201
- Item Weight: 2.10 Pounds
- Item Dimensions: 11.6 x 3.8 x 3.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 47025-04040
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Tacoma Submodels:
- Base, Pre Runner, X-Runner | 6 Cyl 4.0 L GAS
View related parts
2009 Toyota Tacoma Master Cylinder
Part Number: 47025-04020
$1256.76 MSRP: $1841.79
You Save: $585.03 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Sub-Assembly; Brake Master Cylinder; Cylinder Sub-Assembly, Brake Master
- Manufacturer Note: VSC-WITH(W/AUTO LSD)
- Part Name Code: 47201
- Item Weight: 2.10 Pounds
- Item Dimensions: 11.4 x 3.7 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 47025-04020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Tacoma Submodels:
- Base, Pre Runner | 4 Cyl 2.7 L GAS
View related parts
2009 Toyota Tacoma Master Cylinder
Part Number: 47025-04052
$1191.63 MSRP: $1746.34
You Save: $554.71 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Sub-Assembly; Brake Master Cylinder; Cylinder Sub-Assembly, Brake Master
- Manufacturer Note: WITH(*FTP & *EUC:PNC51405A & 51406A)
- Part Name Code: 47201
- Item Weight: 4.10 Pounds
- Item Dimensions: 21.2 x 13.5 x 11.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 47025-04052
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Tacoma Submodels:
- Base, Pre Runner, X-Runner | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
2009 Toyota Tacoma Master Cylinder
Part Number: 47025-04031
$1191.61 MSRP: $1500.00
You Save: $308.39 (21%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Sub-Assembly; Brake Master Cylinder; Cylinder Sub-Assembly, Brake Master
- Manufacturer Note: VSC-WITH(W/AUTO LSD & OFF SW)
- Part Name Code: 47201
- Item Weight: 2.10 Pounds
- Item Dimensions: 11.6 x 3.8 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 47025-04031
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Tacoma Submodels:
- Base, Pre Runner, X-Runner | 6 Cyl 4.0 L GAS
View related parts
2009 Toyota Tacoma Master Cylinder
Part Number: 47025-04050
Product Specifications
- Other Name: Cylinder Sub-Assembly; Brake Master Cylinder; Cylinder Sub-Assembly, Brake Master
- Part Name Code: 47201
- Item Weight: 7.70 Pounds
- Item Dimensions: 21.2 x 12.6 x 11.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 47025-04050
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Tacoma Submodels:
- Base, Pre Runner, X-Runner | 6 Cyl 4.0 L GAS
View related parts
2009 Toyota Tacoma Master Cylinder
Part Number: 47025-04030
Product Specifications
- Other Name: Cylinder Sub-Assembly; Brake Master Cylinder; Cylinder Sub-Assembly, Brake Master
- Manufacturer Note: VSC-WITH(W/AUTO LSD)
- Part Name Code: 47201
- Item Weight: 4.00 Pounds
- Item Dimensions: 8.9 x 7.1 x 5.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 47025-04030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Tacoma Submodels:
- Base, Pre Runner, X-Runner | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS

2009 Toyota Tacoma Brake Master Cylinder

Looking for affordable OEM 2009 Toyota Tacoma Brake Master Cylinder? Explore our comprehensive catalogue of genuine 2009 Toyota Tacoma Brake Master Cylinder. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2009 Toyota Tacoma Parts Questions & Experts Answers

Q: How to install the brake master cylinder on 2009 Toyota Tacoma?
A: Before installing the brake master cylinder check and modify the brake booster push rod according to specifications while verifying that brake booster interior remains empty from vacuum atmosphere by stopping the engine then pressing the brake pedal multiple times. Latch Special Service Tool: 09737-00013 onto the master cylinder sub-assembly before dropping the pin until the piston gets a minimal contact. Special Service Tool: 09737-00012 provides an alternative option to perform the task. Set Special Service Tool: 09737-00013 upside down onto the booster with its pin resting on the booster push rod while checking the clearance between the rod and the pin for a 0 mm (0 in.) standard measurement. Use Special Service Tool: 09737-00020 while holding the rod to alter the presentation by turning the tip using a 7 mm socket driver. The procedure involves installation of a new O-ring onto the brake master cylinder sub-assembly and its securement to the brake booster through tightening 2 nuts to 13 Nm (127 kgf-cm, 9 ft-lbf). Use a union nut wrench to apply torque of 20 Nm (199 kgf cm, 14 ft lbf) directly or 18 Nm (187 kgf cm, 13 ft lbf) when using the wrench when installing brake lines onto the master cylinder sub-assembly. The brake fluid level warning switch connector should be attached to the brake master cylinder sub-assembly while connecting the clutch reservoir tube to the manual transmission reservoir. Use a torque wrench to reattach the negative battery terminal with a force of 3.9 Nm but not exceeding 40 kgf-cm or 35 in-lbf. Brake fluid should be added to the reservoir after which the master cylinder bleeding process includes the brake line and brake actuator followed by a fluid level inspection of the reservoir. The last step involves checking for brake fluid leaks before inspecting brake pedal height along with free play and reserve distance.

Related 2009 Toyota Tacoma Parts

Alternate Year Models

2008 Toyota Tacoma Brake Master Cylinder 2010 Toyota Tacoma Brake Master Cylinder