Other Name: Sensor, Speed, Front Right-Hand; ABS Wheel Speed Sensor, Front Right, Rear Right; Speed Sensor; Front/Rear Passenger Side ABS Wheel Speed Sensor.
Position: Front Passenger Side
Replaces: 89542-60050
Item Weight: 0.50 Pounds
Item Dimensions: 10.2 x 7.1 x 2.3 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 89542-04020
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2009 Toyota Tacoma Submodels:
Base, Limited, Pre Runner, SR, SR5, Trail, Trail Special Edition, TRD Off-Road, TRD Pro, TRD Sport, X-Runner | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 4.0 L GAS
2009 Toyota Tacoma Speed Sensor
Looking for affordable OEM 2009 Toyota Tacoma Speed Sensor? Explore our comprehensive catalogue of genuine 2009 Toyota Tacoma Speed Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2009 Toyota Tacoma Parts Questions & Experts Answers
Q: How to install the front speed sensor and connect the necessary components on 2009 Toyota Tacoma?
A: The front speed sensor installation begins with tightening the bolt while keeping the sensor tip clean then torquing it to reach 8.3 Nm (85 kgf-cm, 73 in-lbf). The speed sensor connector requires attachment as the next step. Fasten the front tire before torquing it to 113 Nm which corresponds to 1152 kgf-cm or 83 ft-lbf. You should attach the cable to the negative battery terminal while tightening it to 3.9 Nm (40 kgf-cm, 35 in-lbf). Complete the checks by inspecting the VSC sensor signal for Hydraulic Brake Booster and Vacuum Brake Booster following proper test modes.