Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

Toyota 46420-04111
Rear Cable

2005-2015 Toyota Tacoma 4642004111

Customer Questions & Expert Answers (8)
Toyota 46420-04111 Rear Cable
  • Part Description
    Cable Assembly, Parking; Brake Cable
  • Part Name Code
    46420
  • Replaces
    46420-04110
  • Manufacturer
    Toyota
Make sure this part fits
$92.77 MSRP: $130.23
You Save: $37.46 (29%)
Ships in 1-3 Business Days
1
ADD TO CART
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers

  • Product Specifications

    BrandGenuine Toyota
    Part Name Code46420
    Manufacturer Part Number46420-04111
    Part DescriptionCable Assembly, Parking; Brake Cable
    Other NamesCable Assembly, Parking Brake
    Item Weight2.30 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces46420-04110
    ManufacturerToyota
    SKU46420-04111
    WarrantyThis genuine Toyota part is guaranteed by Toyota's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65

  • Vehicle Fitment

    Year Make Model Trim Engine
    2005-2015 Toyota TacomaBase, Pre Runner, X-Runner6 Cyl 4.0 L GAS

  • Customer Questions & Expert Answers

    Q:
    Will 46420-04111 fit my vehicle? Posted by ToyotaPartsNow Specialist
    A:
    Find out if part number 46420-04111 is the right fit for your car by Selecting Your Vehicle model.
    Posted by ToyotaPartsNow Specialist
    Q:
    What is the final step in the process for the 2005 Toyota Tacoma? Posted by Customer
    A:
    Install the console upper rear panel sub-assembly for automatic transmission or the console panel upper rear for manual transmission, and reconnect the cable to the negative battery terminal at a torque of 3.9 Nm.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Parking Brake Cable
    Q:
    What steps are involved for parking brake cable assembly No. 1 for automatic transmission for the 2006 Toyota Tacoma? Posted by Customer
    A:
    Release the parking brake, disengage claw A, and remove lock nut B, adjusting nut C, and clip D to disconnect the cable from the parking brake control pedal. Then, remove the 4 nuts A, 2 clamps B, and 2 bolts C from the cable, and take out lock nut A, adjusting nut B, and the cable from the parking brake equalizer.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Parking Brake Cable
    Q:
    How do you install the parking brake cable assembly No. 3 for the 2008 Toyota Tacoma? Posted by Customer
    A:
    Attach the parking brake cable with the clip onto the parking brake equalizer and secure it with 4 bolts, torqued to 13 Nm (127 kgf-cm, 9 ft-lbf). Then, secure it to the backing plate with 2 bolts, torqued to 8.0 Nm (82 kgf-cm, 71 in-lbf).
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Parking Brake Cable
    Q:
    What should be removed from the cable after disconnecting it from the parking brake control pedal for the 2008 Toyota Tacoma? Posted by Customer
    A:
    Remove the 4 nuts, 2 clamps, and 2 bolts from the cable, then take off the lock nut, adjusting nut, and cable from the parking brake equalizer.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Parking Brake Cable
    Q:
    What should be done to prevent airbag activation for the 2005 Toyota Tacoma? Posted by Customer
    A:
    Disconnect the cable from the negative battery terminal and wait for at least 90 seconds.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Parking Brake Cable
    Q:
    What components need to be removed next for the 2009 Toyota Tacoma? Posted by Customer
    A:
    Remove the center airbag sensor assembly and the voltage inverter assembly by taking out the 6 bolts and disconnecting the 2 connectors along with the 2 wire harness clamps.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Parking Brake Cable
    Q:
    What components need to be removed for both automatic and manual transmissions for the 2007 Toyota Tacoma? Posted by Customer
    A:
    Remove the console upper rear panel subassembly, followed by the rear console box assembly and the instrument panel cup holder tray for automatic transmissions.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Parking Brake Cable
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Toyota 46420-04111, Excellent Performance and Perfect Fitment

To ensure reliability, purchase Toyota part # 46420-04111 Rear Cable. It is sometimes referred to as Toyota Parking Brake Cable. OEM parts are unrivaled in terms of quality. They go through extensive quality control inspections and are produced in accordance with Toyota's official factory specifications. All of these remove defects and imperfections. So you can relax knowing they promise exceptional lifespan and flawless fitment.

ToyotaPartsNow.com is a leading supplier of genuine Toyota parts such as Toyota 4642004111 Rear Cable. At ToyotaPartsNow.com, we have a wide variety of OEM Toyota parts available at competitive prices. Our comprehensive range of genuine Toyota parts come with a manufacturer's warranty for peace of mind. We also prioritize customer satisfaction, providing a hassle-free return policy and expedited delivery for all our parts. For detailed Toyota parts information, click here.
Choose ToyotaPartsNow for discounted prices, exceptional service and fast delivery