How to service and repair the parking brake cable on 2007 Toyota Tacoma?

Service or repair of the parking brake cable requires first disconnecting the negative battery terminal and waiting a minimum time period of 90 seconds in order to stop the Air Bags from deploying. The repair starts with removing the console upper rear panel subassembly from automatic and manual transmissions before removing the rear console box assembly from separate seat cars and the instrument panel cup holder tray from automatic transmissions only. Proceed by taking off the front console box for transmissions of both types and the center Air Bag sensor assembly. The first step is to remove the voltage inverter assembly while bench seat types require removal of the parking brake cable joint protector followed by the rear wheel and rear brake drum components. You can remove parking brake cable assembly No. 1 of automatic transmissions by first releasing the parking brake and then detaching the claw A while disconnecting the cable from the parking brake control pedal after you remove lock nut B and adjust nut C together with clip D. Manual transmission maintenance requires users to free the parking brake lever and remove the clip while taking off the pin and sleeve before disconnecting the cable from the parking brake lever. To remove parking brake cable assembly No. 3 the required hardware must be removed before separating it from the backing plate by disconnecting it from the equalizer. The first step for installation is to position parking brake cable assembly No. 3 on the parking brake equalizer using its clip before torquing bolts to 13 Nm (127 kgf-cm, 9 ft. lbs.) and 8.0 Nm (82 kgf-cm, 71 inch lbs.) as per specification. The installation of parking brake cable assembly No. 1 for automatic transmissions requires temporarily adjusting nut B and lock nut A before securing these components with specified nuts and clamps and bolts followed by attaching it to the parking brake control pedal. When installing the sleeve with pin and clip for manual transmissions execute the same operation. A high-temperature application of grease should come before installing brake shoes for both front and rear sections followed by inspecting the drum brake assembly before final installation of the sub-assembly. Reinstall the parking brake cable joint protector for bench seat types and also reinstall the voltage inverter assembly and center Air Bag sensor assembly and front console boxes for both types of transmissions. The procedure requires installing the rear wheel with 113 Nm torque (1,152 kgf-cm and 83 ft. lbs.) while setting proper rear drum brake shoe clearance. To finish the procedure reconnect the negative battery terminal with a force of 3.9 Nm (40 kgf-cm, 35 inch lbs.) before inspecting the SRS warning light and checking parking brake lever movement then adjusting the parking brake pedal travel if needed.

OEM 2007 Toyota Tacoma Parking Brake Cable

Emergency Parking Brake Release Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

14 Parking Brake Cables found

View related parts
2007 Toyota Tacoma Rear Cable
Part Number: 46420-04071
$84.72 MSRP: $118.91
You Save: $34.19 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable; Cable Assembly, Parking Brake
- Replaces: 46420-04070
- Part Name Code: 46420
- Item Weight: 2.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 46420-04071
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota Tacoma Submodels:
- Base | 4 Cyl 2.7 L GAS
View related parts
2007 Toyota Tacoma Rear Cable
Part Number: 46430-04071
$96.92 MSRP: $136.05
You Save: $39.13 (29%)
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable; Cable Assembly, Parking Brake
- Replaces: 46430-04070
- Part Name Code: 46430
- Item Weight: 2.30 Pounds
- Item Dimensions: 24.7 x 12.2 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 46430-04071
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota Tacoma Submodels:
- Base, Pre Runner, TRD Pro, X-Runner | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
2007 Toyota Tacoma Rear Cable
Part Number: 46420-04101
$88.86 MSRP: $124.73
You Save: $35.87 (29%)
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable; Cable Assembly, Parking Brake
- Replaces: 46420-04100
- Part Name Code: 46420
- Item Weight: 5.20 Pounds
- Item Dimensions: 28.3 x 20.4 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 46420-04101
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota Tacoma Submodels:
- Base, Pre Runner, TRD Pro, X-Runner | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
2007 Toyota Tacoma Front Cable
Part Number: 46410-04040
$50.78 MSRP: $70.68
You Save: $19.90 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable; Cable Assembly, Parking Brake
- Part Name Code: 46410
- Item Weight: 2.40 Pounds
- Item Dimensions: 50.5 x 7.2 x 7.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 46410-04040
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota Tacoma Submodels:
- Base, Pre Runner, TRD Pro, X-Runner | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
2007 Toyota Tacoma Front Cable
Part Number: 46410-04030
$64.10 MSRP: $89.97
You Save: $25.87 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable; Cable Assembly, Parking Brake
- Part Name Code: 46410
- Item Weight: 2.00 Pounds
- Item Dimensions: 15.5 x 11.6 x 2.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 46410-04030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota Tacoma Submodels:
- Base, Pre Runner, TRD Pro, X-Runner | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
2007 Toyota Tacoma Rear Cable
Part Number: 46430-04081
$94.91 MSRP: $133.22
You Save: $38.31 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable; Cable Assembly, Parking Brake
- Replaces: 46430-04080
- Part Name Code: 46430
- Item Weight: 2.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 46430-04081
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota Tacoma Submodels:
- Base, Pre Runner, X-Runner | 6 Cyl 4.0 L GAS
View related parts
2007 Toyota Tacoma Rear Cable
Part Number: 46420-04111
$92.77 MSRP: $130.23
You Save: $37.46 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable; Cable Assembly, Parking Brake
- Replaces: 46420-04110
- Part Name Code: 46420
- Item Weight: 2.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 46420-04111
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota Tacoma Submodels:
- Base, Pre Runner, X-Runner | 6 Cyl 4.0 L GAS
View related parts
2007 Toyota Tacoma Rear Cable
Part Number: 46420-04121
$91.71 MSRP: $128.73
You Save: $37.02 (29%)
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable; Cable Assembly, Parking Brake
- Replaces: 46420-04120
- Part Name Code: 46420
- Item Weight: 2.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 46420-04121
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota Tacoma Submodels:
- Base, TRD Pro | 6 Cyl 4.0 L GAS
View related parts
2007 Toyota Tacoma Rear Cable
Part Number: 46430-04051
$86.85 MSRP: $121.91
You Save: $35.06 (29%)
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable; Cable Assembly, Parking Brake
- Replaces: 46430-04050
- Part Name Code: 46430
- Item Weight: 2.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 46430-04051
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota Tacoma Submodels:
- Base, Pre Runner | 4 Cyl 2.7 L GAS
View related parts
2007 Toyota Tacoma Rear Cable
Part Number: 46430-04061
$86.49 MSRP: $121.41
You Save: $34.92 (29%)
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable; Cable Assembly, Parking Brake
- Replaces: 46430-04060
- Part Name Code: 46430
- Item Weight: 2.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 46430-04061
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota Tacoma Submodels:
- Base, X-Runner | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
2007 Toyota Tacoma Rear Cable
Part Number: 46420-04091
$86.49 MSRP: $121.41
You Save: $34.92 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable; Cable Assembly, Parking Brake
- Replaces: 46420-04090
- Part Name Code: 46420
- Item Weight: 2.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 46420-04091
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota Tacoma Submodels:
- Base, X-Runner | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
2007 Toyota Tacoma Rear Cable
Part Number: 46430-04041
$84.72 MSRP: $118.91
You Save: $34.19 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable; Cable Assembly, Parking Brake
- Replaces: 46430-04040
- Part Name Code: 46430
- Item Weight: 2.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 46430-04041
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota Tacoma Submodels:
- Base | 4 Cyl 2.7 L GAS
View related parts
2007 Toyota Tacoma Rear Cable
Part Number: 46420-04081
$84.72 MSRP: $118.91
You Save: $34.19 (29%)
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable; Cable Assembly, Parking Brake
- Replaces: 46420-04080
- Part Name Code: 46420
- Item Weight: 2.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 46420-04081
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota Tacoma Submodels:
- Base, Pre Runner | 4 Cyl 2.7 L GAS
View related parts
2007 Toyota Tacoma Rear Cable
Part Number: 46430-04091
$94.91 MSRP: $133.22
You Save: $38.31 (29%)
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable; Cable Assembly, Parking Brake
- Replaces: 46430-04090
- Part Name Code: 46430
- Item Weight: 3.10 Pounds
- Item Dimensions: 56.1 x 4.1 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 46430-04091
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota Tacoma Submodels:
- Base, TRD Pro | 6 Cyl 4.0 L GAS

2007 Toyota Tacoma Parking Brake Cable

Looking for affordable OEM 2007 Toyota Tacoma Parking Brake Cable? Explore our comprehensive catalogue of genuine 2007 Toyota Tacoma Parking Brake Cable. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2007 Toyota Tacoma Parts Questions & Experts Answers

Q: How to service and repair the parking brake cable on 2007 Toyota Tacoma?
A: Service or repair of the parking brake cable requires first disconnecting the negative battery terminal and waiting a minimum time period of 90 seconds in order to stop the Air Bags from deploying. The repair starts with removing the console upper rear panel subassembly from automatic and manual transmissions before removing the rear console box assembly from separate seat cars and the instrument panel cup holder tray from automatic transmissions only. Proceed by taking off the front console box for transmissions of both types and the center Air Bag sensor assembly. The first step is to remove the voltage inverter assembly while bench seat types require removal of the parking brake cable joint protector followed by the rear wheel and rear brake drum components. You can remove parking brake cable assembly No. 1 of automatic transmissions by first releasing the parking brake and then detaching the claw A while disconnecting the cable from the parking brake control pedal after you remove lock nut B and adjust nut C together with clip D. Manual transmission maintenance requires users to free the parking brake lever and remove the clip while taking off the pin and sleeve before disconnecting the cable from the parking brake lever. To remove parking brake cable assembly No. 3 the required hardware must be removed before separating it from the backing plate by disconnecting it from the equalizer. The first step for installation is to position parking brake cable assembly No. 3 on the parking brake equalizer using its clip before torquing bolts to 13 Nm (127 kgf-cm, 9 ft. lbs.) and 8.0 Nm (82 kgf-cm, 71 inch lbs.) as per specification. The installation of parking brake cable assembly No. 1 for automatic transmissions requires temporarily adjusting nut B and lock nut A before securing these components with specified nuts and clamps and bolts followed by attaching it to the parking brake control pedal. When installing the sleeve with pin and clip for manual transmissions execute the same operation. A high-temperature application of grease should come before installing brake shoes for both front and rear sections followed by inspecting the drum brake assembly before final installation of the sub-assembly. Reinstall the parking brake cable joint protector for bench seat types and also reinstall the voltage inverter assembly and center Air Bag sensor assembly and front console boxes for both types of transmissions. The procedure requires installing the rear wheel with 113 Nm torque (1,152 kgf-cm and 83 ft. lbs.) while setting proper rear drum brake shoe clearance. To finish the procedure reconnect the negative battery terminal with a force of 3.9 Nm (40 kgf-cm, 35 inch lbs.) before inspecting the SRS warning light and checking parking brake lever movement then adjusting the parking brake pedal travel if needed.

Related 2007 Toyota Tacoma Parts

Alternate Year Models

2006 Toyota Tacoma Parking Brake Cable 2008 Toyota Tacoma Parking Brake Cable