How to reassemble the front Wheel Hub on 2008 Toyota Tacoma?

Using 09527-17011 09608-10010 and a press tool insert the new inner bearing into the steering knuckle for 2WD. After that install a new snap ring with snap ring pliers. Install the new front axle hub oil seal with Special Service Tool: 09223-15020 09527-17011 and a plastic-faced hammer while applying MP grease to the oil seal lip. Use Special Service Tool 09710-30050 and a press to push the axle hub into the steering knuckle after putting 3 dust cover bolts which must reach 8.3 Nm (85 kgf-cm, 73 in-lbf) in torque settings. Before putting the front axle hub nut in place, fasten three bolts onto the hub bolt according to the assembly drawing and establish a firm grip with a vise before attaching the spacer. Install a 36 mm socket wrench to put a new axle hub lock nut on and torque it to 199 Nm with a 147 foot-pound force. Secure the lock nut with stake tools made of chisel and hammer. You should fit the knuckle grease retainer cap onto its housing using a brass bar and hammer while avoiding any harm to the component.

OEM 2008 Toyota Tacoma Wheel Hub

Wheel Axle Hub

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Wheel Hubs found

View related parts
2008 Toyota Tacoma Front Hub
Part Number: 43502-04080
$165.31 MSRP: $234.02
You Save: $68.71 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub Sub-Assembly, Front Axle; Wheel Hub, Front; Wheel Hub Repair Kit; Wheel Hub Assembly; Hub; Hub Sub-Assembly, Front Axle, Passenger Side; Hub Sub-Assembly, Front Axle, Driver Side; Wheel Hub
- Position: Front
- Replaces: 43502-04120
- Item Weight: 4.10 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 43502-04080
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tacoma Submodels:
- Base, Limited, Nightshade, Pre Runner, SR, SR5, Trail, TRD Off-Road, TRD Pro, TRD Sport, X-Runner | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 4.0 L GAS
View related parts
2008 Toyota Tacoma Wheel Hub, Front
Part Number: 43502-04140
$176.95 MSRP: $252.65
You Save: $75.70 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub Sub-Assembly, Front Axle; Wheel Hub, Front; Wheel Hub Repair Kit; Front Hub; Hub; Hub Sub-Assembly, Front Axle, Passenger Side; Hub Sub-Assembly, Front Axle, Driver Side
- Position: Front
- Replaces: 43502-04130
- Item Weight: 6.50 Pounds
- Item Dimensions: 11.6 x 8.4 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 43502-04140
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tacoma Submodels:
- Limited, Nightshade, Pre Runner, SR, SR5, Trail, Trail Special Edition, TRD Off-Road, TRD Pro, TRD Sport | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 4.0 L GAS
View related parts
2008 Toyota Tacoma Front Hub
Part Number: 43502-04112
$157.32 MSRP: $222.71
You Save: $65.39 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub Sub-Assembly, Front Axle; Wheel Hub, Front; Wheel Hub Repair Kit; Hub; Hub Sub-Assembly, Front Axle, Passenger Side; Hub Sub-Assembly, Front Axle, Driver Side; Wheel Hub
- Position: Front
- Replaces: 43502-35230
- Item Weight: 10.80 Pounds
- Item Dimensions: 12.4 x 12.2 x 6.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 43502-04112
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tacoma Submodels:
- Base, TRD Pro, X-Runner | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
2008 Toyota Tacoma Bearing Housing, Driver Side
Part Number: 42460-04010
$345.68 MSRP: $506.59
You Save: $160.91 (32%)
Product Specifications
- Other Name: Bearing Assembly, Rear Axle; Wheel Bearing & Hub; Wheel Hub Repair Kit; Axle Bearing; Hub Assembly; Rear Hub & Bearing; Hub & Bearing; Hub & Bearing Assembly, Rear Axle, Driver Side
- Position: Driver Side
- Part Name Code: 42450B
- Item Weight: 9.00 Pounds
- Item Dimensions: 7.0 x 6.6 x 5.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 42460-04010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tacoma Submodels:
- Base, Limited, Nightshade, Pre Runner, SR, SR5, Trail, Trail Special Edition, TRD Off-Road, TRD Pro, TRD Sport, X-Runner | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 4.0 L GAS
View related parts
2008 Toyota Tacoma Bearing Housing, Passenger Side
Part Number: 42450-04010
$345.68 MSRP: $506.59
You Save: $160.91 (32%)
Product Specifications
- Other Name: Bearing Assembly, Rear Axle; Wheel Bearing & Hub; Wheel Hub Repair Kit; Axle Bearing; Rear Hub & Bearing; Hub & Bearing; Hub & Bearing Assembly, Rear Axle, Passenger Side
- Position: Passenger Side
- Part Name Code: 42450A
- Item Weight: 6.60 Pounds
- Item Dimensions: 6.1 x 6.1 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 42450-04010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tacoma Submodels:
- Base, Limited, Nightshade, Pre Runner, SR, SR5, Trail, Trail Special Edition, TRD Off-Road, TRD Pro, TRD Sport, X-Runner | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 4.0 L GAS

2008 Toyota Tacoma Wheel Hub

Looking for affordable OEM 2008 Toyota Tacoma Wheel Hub? Explore our comprehensive catalogue of genuine 2008 Toyota Tacoma Wheel Hub. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota Tacoma Parts Questions & Experts Answers

Q: How to reassemble the front Wheel Hub on 2008 Toyota Tacoma?
A: Using 09527-17011 09608-10010 and a press tool insert the new inner bearing into the steering knuckle for 2WD. After that install a new snap ring with snap ring pliers. Install the new front axle hub oil seal with Special Service Tool: 09223-15020 09527-17011 and a plastic-faced hammer while applying MP grease to the oil seal lip. Use Special Service Tool 09710-30050 and a press to push the axle hub into the steering knuckle after putting 3 dust cover bolts which must reach 8.3 Nm (85 kgf-cm, 73 in-lbf) in torque settings. Before putting the front axle hub nut in place, fasten three bolts onto the hub bolt according to the assembly drawing and establish a firm grip with a vise before attaching the spacer. Install a 36 mm socket wrench to put a new axle hub lock nut on and torque it to 199 Nm with a 147 foot-pound force. Secure the lock nut with stake tools made of chisel and hammer. You should fit the knuckle grease retainer cap onto its housing using a brass bar and hammer while avoiding any harm to the component.