How to install the Crankshaft Position Sensor on 2008 Toyota Tacoma?

The installation process for the 2TR-FE crankshaft position sensor starts with applying engine oil to its O-ring followed by bolt installation while checking for O-ring damage during this step and tightening the bolt to 8.5 Nm torque level (87 kgf-cm, 75 in-lbf). Firmly secure the crankshaft position sensor connector apart from connecting it to the two wire harness clamps. When installing the five bolts on the idle pulley assembly with bracket (w/ air conditioning) maintain uniform tightness while following the specified bolt sequence to apply 21 Nm (214 kgf-cm, 16 ft-lbf) to bol Install the compressor along with its magnetic clutch before adding the fan and generator V belt (both components part of the air conditioning system). Install the engine under cover sub-assembly Number One as part of the 4WD and Pre-Runner models installation. Attach the cable to the negative battery terminal by tightening it to 3.9 Nm (40 kgf-cm, 35 in-lbf).

OEM 2008 Toyota Tacoma Crankshaft Position Sensor

Engine Crankshaft Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Crankshaft Position Sensors found

View related parts
2008 Toyota Tacoma Camshaft Position Sensor, Driver Side
Part Number: 90919-T5005
$97.75 MSRP: $137.21
You Save: $39.46 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Crank Position; Engine Camshaft Position Sensor, Left; Crankshaft Position Sensor; Camshaft Sensor; Cam Sensor; Sensor, Cam Position; Engine Camshaft Position Sensor
- Manufacturer Note: (L)
- Position: Driver Side
- Replaces: 9004A-19003, 90919-05060, 90919-T5002
- Part Name Code: 11101E
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 3
- SKU: 90919-T5005
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tacoma Submodels:
- Base, Limited, Pre Runner, SR, SR5, Trail, Trail Special Edition, TRD Off-Road, TRD Pro, TRD Sport, X-Runner | 6 Cyl 3.5 L GAS, 6 Cyl 4.0 L GAS
View related parts
2008 Toyota Tacoma Crankshaft Position Sensor
Part Number: 90919-05059
$122.19 MSRP: $172.97
You Save: $50.78 (30%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor, Crank Position; Engine Crankshaft Position Sensor; Crankshaft Sensor
- Part Name Code: 11301K
- Item Weight: 0.50 Pounds
- Item Dimensions: 4.7 x 2.8 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90919-05059
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tacoma Submodels:
- Base, Pre Runner, SR, SR5 | 4 Cyl 2.7 L GAS
View related parts
2008 Toyota Tacoma Sensor, Crank Position
Part Number: 90919-A5003
$68.48 MSRP: $96.12
You Save: $27.64 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Engine Crankshaft Position Sensor; Crankshaft Position Sensor
- Manufacturer Note: (L)
- Replaces: 90919-05057
- Part Name Code: 11401G
- Item Weight: 0.40 Pounds
- Item Dimensions: 4.9 x 2.8 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90919-A5003
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tacoma Submodels:
- Base, Pre Runner, TRD Pro, X-Runner | 6 Cyl 4.0 L GAS

2008 Toyota Tacoma Crankshaft Position Sensor

Looking for affordable OEM 2008 Toyota Tacoma Crankshaft Position Sensor? Explore our comprehensive catalogue of genuine 2008 Toyota Tacoma Crankshaft Position Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota Tacoma Parts Questions & Experts Answers

Q: How to install the Crankshaft Position Sensor on 2008 Toyota Tacoma?
A: The installation process for the 2TR-FE crankshaft position sensor starts with applying engine oil to its O-ring followed by bolt installation while checking for O-ring damage during this step and tightening the bolt to 8.5 Nm torque level (87 kgf-cm, 75 in-lbf). Firmly secure the crankshaft position sensor connector apart from connecting it to the two wire harness clamps. When installing the five bolts on the idle pulley assembly with bracket (w/ air conditioning) maintain uniform tightness while following the specified bolt sequence to apply 21 Nm (214 kgf-cm, 16 ft-lbf) to bol Install the compressor along with its magnetic clutch before adding the fan and generator V belt (both components part of the air conditioning system). Install the engine under cover sub-assembly Number One as part of the 4WD and Pre-Runner models installation. Attach the cable to the negative battery terminal by tightening it to 3.9 Nm (40 kgf-cm, 35 in-lbf).