How to install the Knock Sensor on 2008 Toyota Land Cruiser?

The installation of the Knock Sensor requires attaching four sensors with bolts to specific positions between 10 degrees bottoms and tops from level horizontal alignment using 20 Nm (204 kgf-cm) and 15 ft-lbf torque. Next, connect the 4 sensor connectors. You should install the No. 1 engine cover followed by the No. 2 cylinder head cover. Finally, install the intake manifold.

OEM 2008 Toyota Land Cruiser Knock Sensor

Engine Knock Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Knock Sensor found

View related parts
2008 Toyota Land Cruiser Knock Sensor
Part Number: 89615-06010
$138.05 MSRP: $195.42
You Save: $57.37 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Knock Control; Ignition Knock (Detonation) Sensor
- Replaces: 89615-BZ030, 89615-20090, 89615-BZ040
- Part Name Code: 89615
- Item Weight: 0.40 Pounds
- Item Dimensions: 4.1 x 1.9 x 1.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89615-06010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Land Cruiser Submodels:
- Base, Heritage Edition | 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

2008 Toyota Land Cruiser Knock Sensor

Looking for affordable OEM 2008 Toyota Land Cruiser Knock Sensor? Explore our comprehensive catalogue of genuine 2008 Toyota Land Cruiser Knock Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota Land Cruiser Parts Questions & Experts Answers

Q: How to install the Knock Sensor on 2008 Toyota Land Cruiser?
A: The installation of the Knock Sensor requires attaching four sensors with bolts to specific positions between 10 degrees bottoms and tops from level horizontal alignment using 20 Nm (204 kgf-cm) and 15 ft-lbf torque. Next, connect the 4 sensor connectors. You should install the No. 1 engine cover followed by the No. 2 cylinder head cover. Finally, install the intake manifold.

Related 2008 Toyota Land Cruiser Parts

Alternate Year Models

2007 Toyota Land Cruiser Knock Sensor 2009 Toyota Land Cruiser Knock Sensor