OEM 2008 Toyota Camry Clock Spring

2008 Toyota Camry Parts Questions & Experts Answers

• Q: How to install the Clock Spring with and without VSC while ensuring safety and proper alignment on 2008 Toyota Camry?

  A: Installation of the clock spring with VSC requires attaching it to the steering angle sensor using 6 claws when the front wheels are straight and the turn signal switch positioned at neutral to prevent pin snappage. Secure the clock spring with steering angle sensor by engaging the 3 claws while connecting the connectors but avoid touching the Air Bag wire harness. One must remove the lock pin before assembling the steering wheel because of its clock spring replacement. The installation without VSC requires wheel alignment and turn signal switch neutral position according to initial requirements before engaging the three claws and connecting the connectors. A necessary safety check requires you to turn off the ignition and remove the negative battery cable for 90 seconds to stop Air Bag activation before beginning work. After creating firm tension by rotating the clock spring counterclockwise you must turn it clockwise only a few 2.5 turns to match the marks while keeping the Air Bag wire harness out of the way. The steering wheel assembly installation should be followed by checking the steering wheel center point and installing both lower steering wheel covers and the steering pad. Conclusion involves attaching the negative cable and inspecting the steering pad as well as checking the SRS warning light.