How to install the rear Brake Line on 2008 Toyota Camry?

When installing the rear brake flexible hose use a new gasket to connect it with the union bolt then apply torque to 33 Nm (337 kgf-cm, 24 ft-lbf). Fit the hose with a new clip after placing its identification mark toward the outside part of the vehicle before extending the clip until it reaches its full length. Together with Special Service Tool: 09023-00101 users can connect brake line to rear brake flexible hose by using a wrench to apply torque at 14 Nm (143 kgf-cm, 10 ft-lbf), but the required torque can reach 15 Nm (155 kgf-cm, 11 ft-lbf) without using the tool. It is crucial to avoid both brake line deformations and damage and to stop foreign particles from entering the connection area. A torque wrench with a 250 mm (9.84 in.) fulcrum needs to be used when attaching the components with a torque value of 14 Nm (143 kgf-cm, 10 ft-lbf) using the wrench at a correct 90-degree angle. You must install the rear flexible hose to the shock absorber using a bolt which requires a torque value of 19 Nm (194 kgf-cm, 14 ft-lbf). After brake fluid addition to the reservoir, perform brake line and brake actuator assembly bleeding (if TMC Made with VSC is present). Next inspect brake fluid level followed by leak inspection. Finish the process by fastening the rear wheel at 103 Nm torque (1,050 kgf-cm, 76 ft-lbf).

OEM 2008 Toyota Camry Brake Line

Brake Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Brake Lines found

View related parts
2008 Toyota Camry Flex Hose, Driver Side
Part Number: 90947-02F59
$76.43 MSRP: $107.29
You Save: $30.86 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Flexible; Brake Hydraulic Hose, Front Left; Brake Hose; Brake Line; Hose, Flexible(For Front); Hydraulic Hose
- Manufacturer Note: LH
- Position: Driver Side
- Replaces: 90947-02E21
- Part Name Code: 47313A
- Item Weight: 0.80 Pounds
- Item Dimensions: 7.8 x 6.6 x 1.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90947-02F59
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Camry Submodels:
- Base, CE, Hybrid, LE, SE, XLE | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
2008 Toyota Camry Hose, Flexible(For Front), Passenger Side
Part Number: 90947-02F58
$76.43 MSRP: $107.29
You Save: $30.86 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Flexible; Hydraulic Hose; Brake Hose; Brake Line
- Manufacturer Note: RH
- Position: Passenger Side
- Replaces: 90947-02E20
- Part Name Code: 47313A
- Item Weight: 0.80 Pounds
- Item Dimensions: 7.5 x 6.5 x 1.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90947-02F58
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Camry Submodels:
- Base, CE, Hybrid, LE, SE, XLE | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
2008 Toyota Camry Hose, Flexible(For Rear Driver Side)
Part Number: 90080-94126
$50.14 MSRP: $69.79
You Save: $19.65 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Flexible; Hydraulic Hose; Brake Hose; Brake Line
- Manufacturer Note: W(VSC)
- Position: Rear Driver Side
- Replaces: 90947-02C94
- Part Name Code: 47319F
- Item Weight: 0.90 Pounds
- Item Dimensions: 7.3 x 6.4 x 1.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90080-94126
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Camry Submodels:
- Base, CE, Hybrid, LE, SE, XLE | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS
View related parts
2008 Toyota Camry Flex Hose, Rear Driver Side
Part Number: 90947-A2018
$105.95 MSRP: $148.72
You Save: $42.77 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Flexible; Brake Hydraulic Hose, Rear Left; Brake Hose; Brake Line; Hose, Flexible(For Rear Driver Side); Hydraulic Hose
- Position: Rear Driver Side
- Part Name Code: 47319F
- Item Weight: 0.80 Pounds
- Item Dimensions: 7.1 x 6.4 x 1.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90947-A2018
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Camry Submodels:
- Base, CE, Hybrid, LE, SE, XLE | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
2008 Toyota Camry Flex Hose, Passenger Side
Part Number: 90947-A2017
$105.95 MSRP: $148.72
You Save: $42.77 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Flexible; Brake Hydraulic Hose, Rear Right; Brake Hose; Brake Line; Hose, Flexible(For Rear Passenger Side); Hydraulic Hose
- Position: Passenger Side
- Part Name Code: 47318F
- Item Weight: 0.80 Pounds
- Item Dimensions: 7.1 x 6.1 x 1.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90947-A2017
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Camry Submodels:
- Base, CE, Hybrid, LE, SE, XLE | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
2008 Toyota Camry Flex Hose, Driver Side
Part Number: 90947-A2012
$102.86 MSRP: $144.38
You Save: $41.52 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Flexible; Brake Hydraulic Hose, Front Left; Brake Hose; Brake Line; Hose, Flexible(For Front); Hydraulic Hose
- Manufacturer Note: LH
- Position: Driver Side
- Part Name Code: 47313A
- Item Weight: 0.90 Pounds
- Item Dimensions: 7.1 x 6.1 x 1.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90947-A2012
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Camry Submodels:
- Base, CE, Hybrid, LE, SE, XLE | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
2008 Toyota Camry Flex Hose, Passenger Side
Part Number: 90947-A2011
$102.86 MSRP: $144.38
You Save: $41.52 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Flexible; Brake Hydraulic Hose, Front Right; Brake Hose; Brake Line; Hose, Flexible(For Front); Hydraulic Hose
- Manufacturer Note: RH
- Position: Passenger Side
- Part Name Code: 47313A
- Item Weight: 0.80 Pounds
- Item Dimensions: 7.2 x 6.1 x 1.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90947-A2011
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Camry Submodels:
- Base, CE, Hybrid, LE, SE, XLE | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
2008 Toyota Camry Hose, Flexible(For Rear Driver Side)
Part Number: 90947-02F61
$86.68 MSRP: $121.68
You Save: $35.00 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Flexible; Brake Hydraulic Hose; Hydraulic Hose; Brake Hose; Brake Line
- Position: Rear Driver Side
- Part Name Code: 47319F
- Item Weight: 0.80 Pounds
- Item Dimensions: 7.5 x 6.2 x 1.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90947-02F61
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Camry Submodels:
- Base, CE, Hybrid, LE, SE, XLE | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
2008 Toyota Camry Flex Hose, Passenger Side
Part Number: 90947-02F60
$86.68 MSRP: $121.68
You Save: $35.00 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Flexible; Brake Hydraulic Hose, Rear Right; Brake Hose; Brake Line; Hose, Flexible(For Rear Passenger Side); Brake Hydraulic Hose; Hydraulic Hose
- Position: Passenger Side
- Part Name Code: 47318F
- Item Weight: 0.80 Pounds
- Item Dimensions: 7.6 x 6.3 x 1.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90947-02F60
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Camry Submodels:
- Base, CE, Hybrid, LE, SE, XLE | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
2008 Toyota Camry Hose, Flexible(For Rear Passenger Side)
Part Number: 90080-94125
Product Specifications
- Other Name: Hose, Flexible; Hydraulic Hose; Brake Hose; Brake Line
- Manufacturer Note: W(VSC)
- Position: Passenger Side
- Replaces: 90947-02C93
- Part Name Code: 47318F
- Item Weight: 0.40 Pounds
- Item Dimensions: 7.3 x 6.3 x 1.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90080-94125
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Camry Submodels:
- Base, CE, Hybrid, LE, SE, XLE | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS

2008 Toyota Camry Brake Line

Looking for affordable OEM 2008 Toyota Camry Brake Line? Explore our comprehensive catalogue of genuine 2008 Toyota Camry Brake Line. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota Camry Parts Questions & Experts Answers

Q: How to install the rear Brake Line on 2008 Toyota Camry?
A: When installing the rear brake flexible hose use a new gasket to connect it with the union bolt then apply torque to 33 Nm (337 kgf-cm, 24 ft-lbf). Fit the hose with a new clip after placing its identification mark toward the outside part of the vehicle before extending the clip until it reaches its full length. Together with Special Service Tool: 09023-00101 users can connect brake line to rear brake flexible hose by using a wrench to apply torque at 14 Nm (143 kgf-cm, 10 ft-lbf), but the required torque can reach 15 Nm (155 kgf-cm, 11 ft-lbf) without using the tool. It is crucial to avoid both brake line deformations and damage and to stop foreign particles from entering the connection area. A torque wrench with a 250 mm (9.84 in.) fulcrum needs to be used when attaching the components with a torque value of 14 Nm (143 kgf-cm, 10 ft-lbf) using the wrench at a correct 90-degree angle. You must install the rear flexible hose to the shock absorber using a bolt which requires a torque value of 19 Nm (194 kgf-cm, 14 ft-lbf). After brake fluid addition to the reservoir, perform brake line and brake actuator assembly bleeding (if TMC Made with VSC is present). Next inspect brake fluid level followed by leak inspection. Finish the process by fastening the rear wheel at 103 Nm torque (1,050 kgf-cm, 76 ft-lbf).

Related 2008 Toyota Camry Parts

Alternate Year Models

2007 Toyota Camry Brake Line 2009 Toyota Camry Brake Line