Other Name: Absorber Assembly, Shock; Front Left Suspension Strut; Shock Absorber Kit; Set; Strut Shock Kit; Absorber Assembly, Shock, Front Driver Side
Manufacturer Note: MARK 48520-12C70
Position: Front Driver Side
Part Name Code: 48520
Item Weight: 9.20 Pounds
Item Dimensions: 27.4 x 8.2 x 7.6 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 48520-80127
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2008 Scion xB Submodels:
Base | 4 Cyl 2.4 L GAS
2008 Scion xB Shock Absorber
Looking for affordable OEM 2008 Scion xB Shock Absorber? Explore our comprehensive catalogue of genuine 2008 Scion xB Shock Absorber. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2008 Scion xB Parts Questions & Experts Answers
Q: How to install the rear shock absorber on 2008 Scion xB?
A: The installation of the rear shock absorber begins with fitting the rear No. 1 spring bumper onto the rear shock absorber component. The rear axle beam assembly requires support with a jack and wooden block at its spring seat while maintaining proper height clearance of the assembly. Insert the upper portion of the rear shock absorber into the installation hole with while the jack supports it at 20 to 30 mm (0.78 to 1.18 in.) compression. Position the rear suspension support according to the provided illustration while installing it. After placing the rear shock absorber cushion retainer in its proper orientation position the rear shock absorber assembly with a 6 mm socket hexagon wrench and tighten its lock nut to 25 Nm (255 kgf-cm, 18 ft-lbf). Thread the rear wheels onto the vehicle then tighten them to a torque of 103 Nm (1050 kgf-cm, 76 ft-lbf). Twist the bolt holding the rear shock absorber lower side until you reach 90 Nm (918 kgf-cm, 67 ft-lbf) while making sure to tighten the bolt since there is a stopper nut in place. As the last step install the rear floor service hole cover.