OEM 2008 Scion xB Ball Joint

2008 Scion xB Parts Questions & Experts Answers

• Q: How to install the front lower ball joint assembly on 2008 Scion xB?

  A: The front axle assembly should go into a vise without using too much force during installation of the front lower ball joint assembly. The front lower ball joint assembly requires installation on the front axle assembly along with the nut while torqueing to 133 Nm (1356 kgf-cm, 98 ft-lbf). After installing a new cotter pin add another 60 degrees of nut rotation if the cotter pin holes need realignment. Begin by mounting the front axle assembly followed by front lower No. 1 suspension arm sub-assembly installation and then connecting the tie rod end sub-assembly to its proper place. First install the front disc and follow it with the front disc brake caliper assembly and finish with the front speed sensor. The last step in the process involves installing the front wheel along with the front axle hub nut. Review the front wheel alignment and inspect VSC sensor signal output as the final step.