Other Name: Spring, Coil, Front; Coil Spring, Front; Coil Springs; Spring; Spring, Front Coil, Passenger Side; Spring, Front Coil, Driver Side
Position: Front
Item Weight: 6.20 Pounds
Item Dimensions: 16.1 x 6.9 x 6.0 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 48131-12D20
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2008 Scion xB Submodels:
Base | 4 Cyl 2.4 L GAS
2008 Scion xB Coil Springs
Looking for affordable OEM 2008 Scion xB Coil Springs? Explore our comprehensive catalogue of genuine 2008 Scion xB Coil Springs. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2008 Scion xB Coil Springs Parts Q&A
Q: How to install the rear coil springs and ensure proper alignment and stabilization on 2008 Scion xB?
A: Before installation of the rear coil spring start with the upper insulator on the spring yet ensure the stopper stays 10 mm (0.39 in.) or less from the spring's upper end. Install the rear coil spring lower insulator followed by the rear coil spring which should rest on the rear axle beam with its identification mark secured according to the provided illustration. Secure the rear shock absorber assemblies on both sides by temporarily tightening them according to the same method. Complete the left side skid control sensor wire connection followed by installing the same wire type on the right side. First install the rear wheels and after that install the rear floor side member brace sub-assembly and end with rear floor side member covers on both right and left sides. The suspension must remain stable while fully tightening both rear shock absorber assemblies and rear axle beam assembly in the identical right-side installation method utilized for the left side. Before finishing the installation process inspect the alignment of the rear wheels and verify the VSC sensor transmission.