How to install the rear door lock on 2008 Scion xB?

Begin the rear door lock installation process by checking the door lock packing needs new material replacement if used before and the packing surface should always be free from dirt or grease. Put on MP grease to the moving and turning areas of the front door lock before you install the rear door inside locking cable and activate its three claws and close the cover. Place the rear door lock remote control cable to its position and engage the claw before closing the cover. The new door lock wire harness seal must be mounted onto the rear door lock and the rear door lock must be inserted into the rear door outside handle release plate while the rear door panel is set so that the rear door outside handle frame remains locked. Install the rear door lock using the "TORX" socket wrench T30 on its 3 screws which require Toyota Genuine Adhesive 1324 or Three Bond 1324 or an equivalent product applied to the screw threads and undergo torque application to 5.0 Nm (51 kgf-cm, 44 in-lbf). Connect the connector, then proceed to install the rear door window regulator sub-assembly, rear door glass sub-assembly, rear door quarter window Weather Strip, rear door window division bar sub-assembly, rear door glass run, rear door belt moulding assembly, rear door Weather Strip, rear door check assembly, rear door service hole cover, rear door trim bracket, rear door glass inner Weather Strip, rear door trim board sub-assembly, rear door inside handle bezel, and rear door armrest base upper panel. Apply the cable to the negative battery terminal then tighten it to 5.4 Nm (55 kgf-cm, 48 in-lbf).

OEM 2008 Scion xB Door Lock

Power Door Lock Actuator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Door Locks found

View related parts
2008 Scion xB Gate Lock, Rear
Part Number: 69350-28151
$174.01 MSRP: $246.33
You Save: $72.32 (30%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Lock Assembly, Back Door; Liftgate Latch; Tailgate Lock Actuator; Trunk Lock Actuator; Door Lock Actuator; Lock Actuator; Lock Assembly; Lock; Lock Assembly, Back Door, W/Courtesy Lamp Switch
- Manufacturer Note: KOREA SPEC
- Position: Rear
- Replaces: 69350-28150
- Part Name Code: 69350P
- Item Weight: 1.90 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 69350-28151
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Scion xB Submodels:
- Base | 4 Cyl 2.4 L GAS
View related parts
2008 Scion xB Lock Actuator, Driver Side
Part Number: 69040-0C050
$254.66 MSRP: $363.60
You Save: $108.94 (30%)
ADD TO CART
Product Specifications
- Other Name: Lock Assembly, Front Door W; Door Lock Actuator Motor, Front Left; Door Latch Assembly, Front Left; Lock Assembly; Front Door W/Motor, Driver Side; Door Lock Actuator Motor.
- Position: Driver Side
- Replaces: 69040-06180
- Item Weight: 2.10 Pounds
- Item Dimensions: 8.5 x 5.7 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 69040-0C050
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Scion xB Submodels:
- Base | 4 Cyl 2.4 L GAS
View related parts
2008 Scion xB Lock Actuator, Driver Side
Part Number: 69060-06100
$253.96 MSRP: $362.60
You Save: $108.64 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assembly, Rear Door W; Door Lock Actuator Motor, Rear Left; Door Latch Assembly, Rear Left; Lock Assembly; Rear Door W/Motor, Driver Side; Door Lock Actuator Motor.
- Position: Driver Side
- Replaces: 69060-33120
- Part Name Code: 69060A
- Item Weight: 0.60 Pounds
- Item Dimensions: 8.4 x 5.8 x 5.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 69060-06100
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Scion xB Submodels:
- Base | 4 Cyl 2.4 L GAS
View related parts
2008 Scion xB Lock Actuator, Passenger Side
Part Number: 69050-06100
$248.02 MSRP: $354.11
You Save: $106.09 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assembly, Rear Door W; Door Lock Actuator Motor, Rear Right; Door Latch Assembly, Rear Right; Lock Assembly; Rear Door W/Motor, Passenger Side; Door Lock Actuator Motor.
- Position: Passenger Side
- Replaces: 69050-33120
- Part Name Code: 69050A
- Item Weight: 0.60 Pounds
- Item Dimensions: 8.2 x 5.8 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 69050-06100
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Scion xB Submodels:
- Base | 4 Cyl 2.4 L GAS
View related parts
2008 Scion xB Lock Actuator, Passenger Side
Part Number: 69030-42230
$248.02 MSRP: $354.11
You Save: $106.09 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assembly, Front Door W; Door Lock Actuator Motor, Front Right; Door Latch Assembly, Front Right; Lock Assembly; Front Door W/Motor, Passenger Side; Door Lock Actuator Motor; Door Latch Assembly.
- Manufacturer Note: WIRELESS DOOR LOCK-WITH(PANIC BUTTON)&DOOR OUTSIDE HANDLE-BODY COLOR,W/O(PASSENGER KEY CYLINDER)&POWER WINDOW-WITH(DRIVER ONE TOUCH DOWN)
- Position: Passenger Side
- Item Weight: 1.50 Pounds
- Item Dimensions: 8.0 x 5.6 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 69030-42230
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Scion xB Submodels:
- Base | 4 Cyl 2.4 L GAS

2008 Scion xB Door Lock

Looking for affordable OEM 2008 Scion xB Door Lock? Explore our comprehensive catalogue of genuine 2008 Scion xB Door Lock. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Scion xB Parts Questions & Experts Answers

Q: How to install the rear door lock on 2008 Scion xB?
A: Begin the rear door lock installation process by checking the door lock packing needs new material replacement if used before and the packing surface should always be free from dirt or grease. Put on MP grease to the moving and turning areas of the front door lock before you install the rear door inside locking cable and activate its three claws and close the cover. Place the rear door lock remote control cable to its position and engage the claw before closing the cover. The new door lock wire harness seal must be mounted onto the rear door lock and the rear door lock must be inserted into the rear door outside handle release plate while the rear door panel is set so that the rear door outside handle frame remains locked. Install the rear door lock using the "TORX" socket wrench T30 on its 3 screws which require Toyota Genuine Adhesive 1324 or Three Bond 1324 or an equivalent product applied to the screw threads and undergo torque application to 5.0 Nm (51 kgf-cm, 44 in-lbf). Connect the connector, then proceed to install the rear door window regulator sub-assembly, rear door glass sub-assembly, rear door quarter window Weather Strip, rear door window division bar sub-assembly, rear door glass run, rear door belt moulding assembly, rear door Weather Strip, rear door check assembly, rear door service hole cover, rear door trim bracket, rear door glass inner Weather Strip, rear door trim board sub-assembly, rear door inside handle bezel, and rear door armrest base upper panel. Apply the cable to the negative battery terminal then tighten it to 5.4 Nm (55 kgf-cm, 48 in-lbf).