How to service the Crankshaft Position Sensor on 2007 Toyota Solara?

Before servicing the Crankshaft Position Sensor drivers need to detach the right-hand side engine under cover by undoing 5 screws and 3 clips. The front fender apron seal on the right-hand side requires removal which starts with detaching both the clip and two bolts. The sensor connector gets disconnected before removing the bolt while removing both the clamp and sensor. The installation requires a torque setting of 9.0 N.m (92 kgf.cm, 80 in.lbf) to fasten the Crankshaft Position Sensor after which the front fender apron seal and engine under cover must be reinstalled on the right-hand side.

OEM 2007 Toyota Solara Crankshaft Position Sensor

Engine Crankshaft Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Crankshaft Position Sensors found

View related parts
2007 Toyota Solara Sensor, Camshaft Position
Part Number: 90080-19014
$66.23 MSRP: $79.06
You Save: $12.83 (17%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Crank Position; Cam Position; Engine Camshaft; Crankshaft; RPM Sensor
- Replaces: 90919-05026
- Item Weight: 0.50 Pounds
- Item Dimensions: 4.0 x 2.8 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90080-19014
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota Solara Submodels:
- SE, SE Sport, SLE, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L GAS
View related parts
2007 Toyota Solara Crankshaft Position Sensor
Part Number: 90080-19024
$131.47 MSRP: $186.11
You Save: $54.64 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Crank Position; Engine Crankshaft Position Sensor; Crankshaft Sensor
- Replaces: 90919-05047
- Part Name Code: 11301K
- Item Weight: 1.40 Pounds
- Item Dimensions: 14.4 x 12.1 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90080-19024
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota Solara Submodels:
- SE, SE Sport, SLE, Sport | 4 Cyl 2.4 L GAS
View related parts
2007 Toyota Solara Crankshaft Position Sensor
Part Number: 90080-19009
$77.72 MSRP: $109.10
You Save: $31.38 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Crank Position; Engine Crankshaft Position Sensor; RPM Sensor, Engine Management; Crankshaft Sensor
- Manufacturer Note: (L)
- Replaces: 90919-05012
- Part Name Code: 15100R
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.6 x 2.2 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90080-19009
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota Solara Submodels:
- SE, SE Sport, SLE, Sport | 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS

2007 Toyota Solara Crankshaft Position Sensor

Looking for affordable OEM 2007 Toyota Solara Crankshaft Position Sensor? Explore our comprehensive catalogue of genuine 2007 Toyota Solara Crankshaft Position Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2007 Toyota Solara Parts Questions & Experts Answers

Q: How to service the Crankshaft Position Sensor on 2007 Toyota Solara?
A: Before servicing the Crankshaft Position Sensor drivers need to detach the right-hand side engine under cover by undoing 5 screws and 3 clips. The front fender apron seal on the right-hand side requires removal which starts with detaching both the clip and two bolts. The sensor connector gets disconnected before removing the bolt while removing both the clamp and sensor. The installation requires a torque setting of 9.0 N.m (92 kgf.cm, 80 in.lbf) to fasten the Crankshaft Position Sensor after which the front fender apron seal and engine under cover must be reinstalled on the right-hand side.