How to remove the Crankshaft Position Sensor on Toyota Solara?

One must remove 5 screws and 3 clips first to take off the engine under cover from the right-hand side of the vehicle to access the Crankshaft Position Sensor for the 2AZ-FE engine control system. Begin this service by first removing the 2 bolts and clip which secure the front fender apron seal on the right-hand side. Thesensor connector should be disconnected followed by removing the bolt and clamp along with the sensor to finish the removal sequence.

How to install the Crankshaft Position Sensor on Toyota Solara?

The Crankshaft Position Sensor for the 2AZ-FE Engine Control System installation requires application of 9.0 Nm torque to the sensor. Install the Front Fender Apron Seal RH before applying the Engine Under Cover RH to the system.

OEM Toyota Solara Crankshaft Position Sensor

Engine Crankshaft Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Crankshaft Position Sensors found

View related parts
Toyota Solara Sensor, Camshaft Position
Part Number: 90080-19014
$69.78 MSRP: $83.30
You Save: $13.52 (17%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Crank Position; Cam Position; Engine Camshaft; Crankshaft; RPM Sensor
- Replaces: 90919-05026
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2004-2008 Toyota Solara | SE, SE Sport, SLE, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L GAS
View related parts
Toyota Solara Crankshaft Position Sensor
Part Number: 90080-19024
$138.40 MSRP: $195.92
You Save: $57.52 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Crank Position; Engine Crankshaft Position Sensor; Crankshaft Sensor
- Replaces: 90919-05047
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2002-2008 Toyota Solara | SE, SE Sport, SLE, Sport | 4 Cyl 2.4 L GAS
View related parts
Toyota Solara Crankshaft Position Sensor
Part Number: 90080-19011
$107.23 MSRP: $150.52
You Save: $43.29 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Crank Position; Engine Crankshaft Position Sensor; Crankshaft Sensor
- Manufacturer Note: (L)
- Replaces: 90919-05017
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1999-2001 Toyota Solara | SE | 4 Cyl 2.2 L GAS
View related parts
Toyota Solara Crankshaft Position Sensor
Part Number: 90080-19009
$81.87 MSRP: $114.92
You Save: $33.05 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Crank Position; Engine Crankshaft Position Sensor; RPM Sensor, Engine Management; Crankshaft Sensor
- Manufacturer Note: (L)
- Replaces: 90919-05012
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2004-2008, 1999-2002 Toyota Solara | SE, SE Sport, SLE, Sport | 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS

Toyota Solara Crankshaft Position Sensor

Choose genuine Crankshaft Position Sensor that pass strict quality control tests. You can trust the top quality and lasting durability. Shopping for OEM Crankshaft Position Sensor for your Toyota Solara? Our website is your one-stop destination. We stock an extensive selection of genuine Toyota Solara parts. The price is affordable so you can save more. It only takes minutes to browse and find the exact fit. Easily add to cart and check out fast. Our hassle-free return policy will keep you stress-free. We process orders quickly for swift delivery. Your parts will arrive faster, so you can get back on the road sooner.

The Crankshaft Position Sensor is an important component in Toyota Solara that is used to monitor the position and the rotational speed, of the crank shaft and sends the information to the power train control module. This information plays a vital role to control ignition timing as well as the timing of fuel injection. Controlling of such parameters as utilized by the engine can be effectively controlled by the help of this sensor. Inductive sensors, Hall Effect sensors, magnetoresistive sensors, and optical sensors can be implemented in Solara vehicles; each has its own strengths and weaknesses. Sometimes crankshaft position sensors go bad and this can cause problems in the start up and general running of the vehicle's engine and therefore should be checked to ensure it is functioning correctly.

Toyota Solara Crankshaft Position Sensor Parts and Q&A

Crankshaft Position Sensor
90080-19024
Q: How to remove the Crankshaft Position Sensor on Toyota Solara?
A:
One must remove 5 screws and 3 clips first to take off the engine under cover from the right-hand side of the vehicle to access the Crankshaft Position Sensor for the 2AZ-FE engine control system. Begin this service by first removing the 2 bolts and clip which secure the front fender apron seal on the right-hand side. Thesensor connector should be disconnected followed by removing the bolt and clamp along with the sensor to finish the removal sequence.
Crankshaft Position Sensor
90080-19009
Q: How to install the Crankshaft Position Sensor on Toyota Solara?
A:
The Crankshaft Position Sensor for the 2AZ-FE Engine Control System installation requires application of 9.0 Nm torque to the sensor. Install the Front Fender Apron Seal RH before applying the Engine Under Cover RH to the system.