How to service the Camshaft Position Sensor on 2007 Toyota Solara?

Service of the Camshaft Position Sensor begins by taking off the air cleaner assembly followed by disconnecting the sensor connector and detaching both the bolt and sensor. The O-ring on the sensor requires a thin layer of engine oil for installation before fitting the sensor with its bolt while tightening to 9.0 N.m (92 kgf.cm, 80 in.lbf). After reinstalling the air cleaner assembly you should verify the proper attachment of the vacuum hose.

OEM 2007 Toyota Solara Camshaft Position Sensor

Cam Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Camshaft Position Sensor found

View related parts
2007 Toyota Solara Sensor, Camshaft Position
Part Number: 90080-19014
$66.23 MSRP: $79.06
You Save: $12.83 (17%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Crank Position; Cam Position; Engine Camshaft; Crankshaft; RPM Sensor
- Replaces: 90919-05026
- Item Weight: 0.50 Pounds
- Item Dimensions: 4.0 x 2.8 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90080-19014
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota Solara Submodels:
- SE, SE Sport, SLE, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L GAS

2007 Toyota Solara Camshaft Position Sensor

Looking for affordable OEM 2007 Toyota Solara Camshaft Position Sensor? Explore our comprehensive catalogue of genuine 2007 Toyota Solara Camshaft Position Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2007 Toyota Solara Parts Questions & Experts Answers

Q: How to service the Camshaft Position Sensor on 2007 Toyota Solara?
A: Service of the Camshaft Position Sensor begins by taking off the air cleaner assembly followed by disconnecting the sensor connector and detaching both the bolt and sensor. The O-ring on the sensor requires a thin layer of engine oil for installation before fitting the sensor with its bolt while tightening to 9.0 N.m (92 kgf.cm, 80 in.lbf). After reinstalling the air cleaner assembly you should verify the proper attachment of the vacuum hose.