How to service and repair the rear Wheel Hub and Wheel Bearing on 2007 Toyota Highlander?

A dial indicator inspection must be conducted on the wheel hub center for looseness while the tool is set perpendicular to the measurement surface; the acceptable tolerances are 0 mm (0 in.) and any deviation requires new wheel hub assembly installation. Perform this measurement on the hub surface exterior to the bolt location where a dial indicator confirms up to 0.08 mm (0.0031 in.) runout before changing the unit. Begin by removing the front wheel before separating the right-hand side disc brake caliper assembly by taking out the bolt along with the flexible hose and securing the caliper while removing its two bolts. Separate the rear wheel hub and bearing assembly from the left-hand side through removal of four mounting bolts. When installing the part begin by attaching the left-hand side rear wheel hub and bearing assembly with four bolts that should be torqued to 80 N m (816 kgf cm, 59 ft. lbf). The skid control sensor wire needs to be reconnected before inspecting bearing backlash and wheel hub deviation and finally installing the rear disc. Install the two bolts on the right-hand side rear disc brake caliper assembly where torque should be set to 78 N m (800 kgf cm, 58 ft. lbf) and secure the flexible hose with a bolt torqued to 19 N m (194 kgf cm, 14 ft. lbf). For installation of the rear wheel utilize a torque of 103 N m (1,050 kgf cm, 76 ft. lbf) then inspect wheel alignment and verify the ABS speed sensor signal.

OEM 2007 Toyota Highlander Wheel Bearing

Hub Bearing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Wheel Bearings found

View related parts
2007 Toyota Highlander Hub Assembly, Front
Part Number: 43502-0E030
$130.65 MSRP: $184.95
You Save: $54.30 (30%)
ADD TO CART
Product Specifications
- Other Name: Hub Sub-Assembly, Front Axle; Wheel Hub, Front; Front Hub & Bearing; Front Hub; Hub
- Position: Front
- Replaces: 43502-AA021, 43502-28100, 43502-08010, 43502-AA020
- Item Weight: 5.10 Pounds
- Item Dimensions: 6.6 x 6.9 x 4.6 inches
- Condition: New
- SKU: 43502-0E030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota Highlander Submodels:
- Base, Hybrid, Hybrid Limited, Limited, SE, Sport | 4 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS
View related parts
2007 Toyota Highlander Wheel Bearing
Part Number: 90080-36193
$102.30 MSRP: $143.60
You Save: $41.30 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Radial Ball; Wheel Bearing, Front, Front Left, Front Right; Wheel Bearing Kit; Front Wheel Bearing for Passenger and Driver Side Axle Hub.
- Replaces: 90363-A0001, 90369-45005, 90369-45003
- Item Weight: 2.40 Pounds
- Item Dimensions: 3.7 x 3.7 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90080-36193
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota Highlander Submodels:
- Base, Hybrid, Hybrid Limited, Limited, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.3 L GAS
View related parts
2007 Toyota Highlander Hub & Bearing Assembly, Rear Axle, Passenger Side
Part Number: 42410-0E050
$323.57 MSRP: $461.97
You Save: $138.40 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub&Bearing Assembly; Rear Axle, Driver Side; Wheel Hub Repair Kit; Wheel Bearing Kit; Axle Bearing
- Replaces: 42410-48041, 42410-0E021, 42410-48040
- Item Weight: 8.30 Pounds
- Item Dimensions: 6.9 x 6.9 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 42410-0E050
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota Highlander Submodels:
- Base, Hybrid, Hybrid Limited, Limited, Plus, SE, Sport | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS
View related parts
2007 Toyota Highlander Bearing (For Front Drive Shaft)
Part Number: 90080-36133
$31.18 MSRP: $43.39
You Save: $12.21 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Radial Ball; Wheel Bearing; Axle Bearing
- Replaces: 90363-41002, 90369-41001
- Part Name Code: 43410C
- Item Weight: 1.10 Pounds
- Item Dimensions: 3.2 x 1.0 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90080-36133
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota Highlander Submodels:
- Base, Hybrid, Hybrid LE, Hybrid Limited, Hybrid Limited Platinum, Hybrid XLE, LE, LE Plus, Limited, Limited Platinum, Plus, SE, Sport, XLE | 4 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS
View related parts
2007 Toyota Highlander Hub Assembly, Front
Part Number: 43502-28090
$129.36 MSRP: $183.12
You Save: $53.76 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub Sub-Assembly, Front Axle; Wheel Hub, Front; Front Hub; Hub; Hub Sub-Assembly, Front Axle, Passenger Side; Hub Sub-Assembly, Front Axle, Driver Side; Wheel Hub
- Manufacturer Note: (J)
- Position: Front
- Replaces: 43502-AA010, 43502-AA011
- Item Weight: 4.10 Pounds
- Item Dimensions: 6.7 x 6.7 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 43502-28090
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota Highlander Submodels:
- Base, Limited, SE, Sport | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS
View related parts
2007 Toyota Highlander Hub&Bearing Assembly, Rear Axle
Part Number: 42460-0E010
$507.55 MSRP: $743.82
You Save: $236.27 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: HUB & BRG ASSY, RR A; Wheel Bearing and Hub Assembly; Wheel Hub Repair Kit; Wheel Bearing; Axle Bearing; Wheel Hub
- Position: Rear Driver Side
- Replaces: 42460-48030
- Item Weight: 9.90 Pounds
- Item Dimensions: 7.1 x 6.8 x 5.3 inches
- Condition: New
- SKU: 42460-0E010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota Highlander Submodels:
- Base, Hybrid, Hybrid Limited, Limited, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.3 L GAS
View related parts
2007 Toyota Highlander Hub&Bearing Assembly, Rear Axle
Part Number: 42450-0E010
$507.55 MSRP: $743.82
You Save: $236.27 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: HUB & BRG ASSY, RR A; Wheel Bearing and Hub Assembly; Wheel Hub Repair Kit; Wheel Bearing; Axle Bearing; Wheel Hub
- Position: Rear Passenger Side
- Replaces: 42450-48030
- Item Weight: 10.00 Pounds
- Item Dimensions: 7.0 x 6.5 x 5.1 inches
- Condition: New
- SKU: 42450-0E010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota Highlander Submodels:
- Base, Hybrid, Hybrid Limited, Limited, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.3 L GAS

2007 Toyota Highlander Wheel Bearing

Looking for affordable OEM 2007 Toyota Highlander Wheel Bearing? Explore our comprehensive catalogue of genuine 2007 Toyota Highlander Wheel Bearing. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2007 Toyota Highlander Parts Questions & Experts Answers

Q: How to service and repair the rear Wheel Hub and Wheel Bearing on 2007 Toyota Highlander?
A: A dial indicator inspection must be conducted on the wheel hub center for looseness while the tool is set perpendicular to the measurement surface; the acceptable tolerances are 0 mm (0 in.) and any deviation requires new wheel hub assembly installation. Perform this measurement on the hub surface exterior to the bolt location where a dial indicator confirms up to 0.08 mm (0.0031 in.) runout before changing the unit. Begin by removing the front wheel before separating the right-hand side disc brake caliper assembly by taking out the bolt along with the flexible hose and securing the caliper while removing its two bolts. Separate the rear wheel hub and bearing assembly from the left-hand side through removal of four mounting bolts. When installing the part begin by attaching the left-hand side rear wheel hub and bearing assembly with four bolts that should be torqued to 80 N m (816 kgf cm, 59 ft. lbf). The skid control sensor wire needs to be reconnected before inspecting bearing backlash and wheel hub deviation and finally installing the rear disc. Install the two bolts on the right-hand side rear disc brake caliper assembly where torque should be set to 78 N m (800 kgf cm, 58 ft. lbf) and secure the flexible hose with a bolt torqued to 19 N m (194 kgf cm, 14 ft. lbf). For installation of the rear wheel utilize a torque of 103 N m (1,050 kgf cm, 76 ft. lbf) then inspect wheel alignment and verify the ABS speed sensor signal.