Other Name: Belt Assembly, Rear Seat; Seat Belt Receptacle, Rear Outer; Latch; Belt Assembly, Rear Seat, Inner
Manufacturer Note: BLACK,TRIM1#
Position: Inner
Replaces: 73380-35170-C0
Part Name Code: 73380A
Item Weight: 1.30 Pounds
Condition: New
Fitment Type: Direct Replacement
Require Quantity: 2
SKU: 73380-35170-C2
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2007 Toyota FJ Cruiser Submodels:
Base, Trail Teams Special Edition, TRD Special Edition | 6 Cyl 4.0 L GAS
2007 Toyota FJ Cruiser Seat Belt
Looking for affordable OEM 2007 Toyota FJ Cruiser Seat Belt? Explore our comprehensive catalogue of genuine 2007 Toyota FJ Cruiser Seat Belt. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2007 Toyota FJ Cruiser Parts Questions & Experts Answers
Q: How to properly install and remove the Seat Belt for the Rear Seat Inner Belt Assembly on both the RH and LH sides on 2007 Toyota FJ Cruiser?
A: The process of removing the Rear Seat Inner Belt Assembly for the RH side begins by first pulling up the rear seat cushion then removing the buckle from the rear seatback pocket. This is followed by removing the bolt and anchor plate of the rear center seat outer belt combined with the rear seat inner belt. The LH side installation requires lifting the rear seat cushion before removing the buckle from the rear seatback band and then removing the bolt with anchor plate and rear seat inner belt. The rear seat inner belt assembly requires installation for the RH side by aligning the anchor plate jam hole with the body stud bolt and installing the anchor plate provisionally before installing the rear center seat belt anchor plate while torquing it to 42 N.m (430 kgf.cm, 31 ft.lbf). The anchor plate installation should avoid laying across curved portions of the rear seat inner belt. You should place the buckle inside the rear seatback pocket after installing both anchor plates and their corresponding seat cushions. The next step includes aligning the jam hole in the anchor plate of the rear seat inner belt to the body stud bolt to provisionally install the anchor plate before securing the anchor plate of the rear center seat inner belt with the bolt which must have 42 N.m (430 kgf.cm, 31 ft.lbf) torque setting up. Placement of anchor plates needs to avoid the convex areas of the rear seat inner belt. The buckles need installation into the rear seatback bands after which you can place the rear seat cushions.