How to replace the FRONT LOWER CONTROL ARM components on 2005 Toyota Tundra?

The FRONT LOWER SUSPENSION ARM components replacement process requires eliminating the bushing first with a combination of a chisel and hammer to elevate the bushing flange followed by the usage of Special Service Tool: 09613-26010, 09632-36010, 09950-00020 and a press. After acquiring Special Service Tool: 09502-12010 and 09631-12090 you should use a press along with a steel plate to properly install the new No. 1 bushing which needs to be oriented in the right direction. When installing the No. 2 bushing you need Special Service Tool: 09631-12090, 09950-60020 (09951-00680), a press together with a steel plate for the procedure. Verify the correct direction before bushing installation. On-vehicle replacement of No. 1 and No. 2 spring bumpers must start by first removing the front wheel. Before installing the No. 1 spring bumper, users should employ Special Service Tool: 09922-10010 to torque the unit at 23 Nm (235 kgf-cm, 17 ft. lbs.) using a 345 mm (13.58 inch) torque wrench with a fulcrum length. The installation of the No. 2 spring bumper requires using Special Service Tool: 09922-10010 to achieve the identical torque specifications. The stabilizer bar should be reinstalled before you install the front wheel which requires torque application at 110 Nm (1,150 kgf-cm, 83 ft. lbs.).

OEM 2005 Toyota Tundra Control Arm

Suspension Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Control Arms found

View related parts
2005 Toyota Tundra Lower Control Arm, Driver Side
Part Number: 48069-34040
$233.28 MSRP: $333.07
You Save: $99.79 (30%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Arm Sub-Assembly, Suspension; Suspension Control Arm, Front Left Lower; Arm Sub-Assembly, Front Suspension, Lower Driver Side; Suspension Control Arm; Control Arm
- Position: Lower Driver Side
- Part Name Code: 48069
- Item Weight: 21.00 Pounds
- Item Dimensions: 22.9 x 6.1 x 17.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48069-34040
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2005 Toyota Tundra Submodels:
- Base, Limited, SR5 | 6 Cyl 3.4 L GAS, 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
2005 Toyota Tundra Lower Control Arm, Passenger Side
Part Number: 48068-34040
$238.46 MSRP: $340.47
You Save: $102.01 (30%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Arm Sub-Assembly, Suspension; Suspension Control Arm, Front Right Lower; Arm Sub-Assembly, Front Suspension, Lower Passenger Side; Suspension Control Arm; Control Arm
- Position: Passenger Side
- Part Name Code: 48068
- Item Weight: 21.00 Pounds
- Item Dimensions: 22.7 x 6.4 x 18.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48068-34040
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2005 Toyota Tundra Submodels:
- Base, Limited, SR5 | 6 Cyl 3.4 L GAS, 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
2005 Toyota Tundra Upper Control Arm, Driver Side
Part Number: 48630-34010
$218.67 MSRP: $312.21
You Save: $93.54 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Assembly, Suspension; Suspension Control Arm, Front Left Upper; Arm Assembly, Front Suspension, Upper Driver Side; Suspension Control Arm; Control Arm
- Position: Upper Driver Side
- Part Name Code: 48630
- Item Weight: 5.90 Pounds
- Item Dimensions: 16.1 x 3.5 x 12.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48630-34010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2005 Toyota Tundra Submodels:
- Base, Limited, SR5 | 6 Cyl 3.4 L GAS, 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
2005 Toyota Tundra Upper Control Arm, Passenger Side
Part Number: 48610-34010
$218.67 MSRP: $312.21
You Save: $93.54 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Assembly, Suspension; Suspension Control Arm, Front Right Upper; Arm Assembly, Front Suspension Upper, Passenger Side; Suspension Control Arm; Control Arm
- Position: Passenger Side
- Part Name Code: 48610
- Item Weight: 6.00 Pounds
- Item Dimensions: 16.1 x 3.6 x 12.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48610-34010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2005 Toyota Tundra Submodels:
- Base, Limited, SR5 | 6 Cyl 3.4 L GAS, 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS

2005 Toyota Tundra Control Arm

Looking for affordable OEM 2005 Toyota Tundra Control Arm? Explore our comprehensive catalogue of genuine 2005 Toyota Tundra Control Arm. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2005 Toyota Tundra Parts Questions & Experts Answers

Q: How to replace the FRONT LOWER CONTROL ARM components on 2005 Toyota Tundra?
A: The FRONT LOWER SUSPENSION ARM components replacement process requires eliminating the bushing first with a combination of a chisel and hammer to elevate the bushing flange followed by the usage of Special Service Tool: 09613-26010, 09632-36010, 09950-00020 and a press. After acquiring Special Service Tool: 09502-12010 and 09631-12090 you should use a press along with a steel plate to properly install the new No. 1 bushing which needs to be oriented in the right direction. When installing the No. 2 bushing you need Special Service Tool: 09631-12090, 09950-60020 (09951-00680), a press together with a steel plate for the procedure. Verify the correct direction before bushing installation. On-vehicle replacement of No. 1 and No. 2 spring bumpers must start by first removing the front wheel. Before installing the No. 1 spring bumper, users should employ Special Service Tool: 09922-10010 to torque the unit at 23 Nm (235 kgf-cm, 17 ft. lbs.) using a 345 mm (13.58 inch) torque wrench with a fulcrum length. The installation of the No. 2 spring bumper requires using Special Service Tool: 09922-10010 to achieve the identical torque specifications. The stabilizer bar should be reinstalled before you install the front wheel which requires torque application at 110 Nm (1,150 kgf-cm, 83 ft. lbs.).