Other Name: Leaf Sub-Assembly, Rear Spring; Leaf Spring, Rear Left; Leaf, Rear Spring
Manufacturer Note: LH
Position: Driver Side
Part Name Code: 48211
Condition: New
Fitment Type: Direct Replacement
SKU: 48031-0C010
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2005 Toyota Tundra Submodels:
Base, SR5 | 6 Cyl 3.4 L GAS, 6 Cyl 4.0 L GAS
| Page 1 of 3 |Next >
1-20 of 60 Results
2005 Toyota Tundra Leaf Spring
Looking for affordable OEM 2005 Toyota Tundra Leaf Spring? Explore our comprehensive catalogue of genuine 2005 Toyota Tundra Leaf Spring. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2005 Toyota Tundra Leaf Spring Parts Q&A
Q: How to replace the rear leaf spring components step by step on 2005 Toyota Tundra?
A: First approach the rear leaf spring bushings for replacement by cutting their tabs using a saw followed by utilization of Special Service Tool: 09950-60010 (09951-00350) 09950-70010 (09951-07150) combined with a press for inner tube and rubber part removal from each bushing. At this stage install new bushings through Special Service Tool: 09710-28012 (09710-07062), 09710-30041 (09710-03211) and a press. To replace the leaf spring begin by opening spring clips through bending followed by using a chisel and hammer to pry up the two spring clips. Set the spring center bolt inside a vise to remove the center bolt and nut. The spring clip replacement requires drilling off the rivet's head using a drill to drive it out from the leaf spring holes then insert a new rivet into the holes for press fixation. Place the spring center bolt and nut through the leaf spring holes while securing the leaves within a vise thus torquing them to 44 Nm (450 kgf-cm, 33 ft. lbs.). A hammer should be used to shape the spring clips before installation.