Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

Toyota 48068-34040
Lower Control Arm, Passenger Side

2004-2007 Toyota 4806834040

Customer Questions & Expert Answers (8)
Toyota 48068-34040 Lower Control Arm, Passenger Side
Toyota 48068-34040 Lower Control Arm, Passenger Side
Toyota 48068-34040 Lower Control Arm, Passenger Side
  • Part Description
    Arm Sub-Assembly, Suspension; Suspension Control Arm, Front Right Lower
  • Part Name Code
    48068
  • Position
    Passenger Side
  • Manufacturer
    Toyota
Make sure this part fits
$238.46 MSRP: $340.47
You Save: $102.01 (30%)
Ships in 1 Business Day
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers

  • 48068-34040 Lower Control Arm, Passenger Side is Ref No. 11 in the diagram below

    2004 Toyota Tundra Lower Control Arm, Passenger Side Diagram for 48068-34040
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 48068-34040

  • Product Specifications

    BrandGenuine Toyota
    Part Name Code48068
    Manufacturer Part Number48068-34040
    Part DescriptionArm Sub-Assembly, Suspension; Suspension Control Arm, Front Right Lower
    Other NamesArm Sub-Assembly, Front Suspension, Lower Passenger Side; Suspension Control Arm; Control Arm
    Item Dimensions22.7 x 6.4 x 18.2 inches
    Item Weight21.00 Pounds
    PositionPassenger Side
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerToyota
    SKU48068-34040
    WarrantyThis genuine Toyota part is guaranteed by Toyota's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65

  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2007 Toyota SequoiaLimited, SR58 Cyl 4.7 L GAS
    2004-2006 Toyota TundraBase, Limited, SR56 Cyl 3.4 L GAS, 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS

  • Customer Questions & Expert Answers

    Q:
    Will 48068-34040 fit my vehicle? Posted by ToyotaPartsNow Specialist
    A:
    Find out if part number 48068-34040 is the right fit for your car by Selecting Your Vehicle model.
    Posted by ToyotaPartsNow Specialist
    Q:
    What should be done after removing the rear wheel for the 2006 Toyota Sequoia? Posted by Customer
    A:
    Support the rear axle housing with a jack, then disconnect the speed sensor wire harness and remove the bolt and brake line bracket, applying a torque of 28 Nm (286 kgf-cm, 21 ft. lbs.).
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Control Arm
    Q:
    What is the process for removing the upper control arm for the 2005 Toyota Sequoia? Posted by Customer
    A:
    Disconnect the speed sensor wire harness, then remove the bolt and brake line bracket with a torque of 28 Nm (286 kgf-cm, 21 ft. lbs.). After that, remove the 2 nuts, washers, bolts, and upper control arm, applying a torque of 140 Nm (1,428 kgf-cm, 103 ft. lbs.).
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Control Arm
    Q:
    How do you remove the lower control arm assembly for the 2007 Toyota Sequoia? Posted by Customer
    A:
    First, take off the bolt and parking brake cable bracket, applying a torque of 26 Nm (265 kgf-cm, 19 ft. lbs.).
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Control Arm
    Q:
    What is the process for replacing the bushing for the 2004 Toyota Sequoia? Posted by Customer
    A:
    Pry up the flange with a chisel and hammer, then use Special Service Tool: 09613-26010, 09631-20060, 09950-00020 and a press to remove it.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Control Arm
    Q:
    What is the first step to remove the FRONT LOWER SUSPENSION ARM for the 2006 Toyota Tundra? Posted by Customer
    A:
    First, take off the RH and LH front wheels.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Control Arm
    Q:
    How do you install the new No. 1 bushing for the 2005 Toyota Tundra? Posted by Customer
    A:
    Install a new No. 1 bushing with Special Service Tool: 09502-12010, 09631-12090, a press, and a steel plate, ensuring it is set in the correct direction before installation.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Control Arm
    Q:
    What is the procedure for connecting the upper ball joint for the 2004 Toyota Tundra? Posted by Customer
    A:
    Connect it to the upper suspension arm, install the nut and a new cotter pin, tightening the nut further up to 60° if the cotter pin holes are misaligned, and torque to 105 Nm.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Control Arm
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Toyota 48068-34040, Excellent Performance and Perfect Fitment

To ensure reliability, purchase Toyota part # 48068-34040 Lower Control Arm, Passenger Side. It is sometimes referred to as Toyota Control Arm. OEM parts are unrivaled in terms of quality. They go through extensive quality control inspections and are produced in accordance with Toyota's official factory specifications. All of these remove defects and imperfections. So you can relax knowing they promise exceptional lifespan and flawless fitment.

ToyotaPartsNow.com is a leading supplier of genuine Toyota parts such as Toyota 4806834040 Lower Control Arm, Passenger Side. At ToyotaPartsNow.com, we have a wide variety of OEM Toyota parts available at competitive prices. Our comprehensive range of genuine Toyota parts come with a manufacturer's warranty for peace of mind. We also prioritize customer satisfaction, providing a hassle-free return policy and expedited delivery for all our parts. For detailed Toyota parts information, click here.
Choose ToyotaPartsNow for discounted prices, exceptional service and fast delivery