How to remove the rear Sway Bar Kit on 2005 Toyota Sequoia?

The process of sway bar kit removal starts by removing the rear wheels at 110 Nm (1,150 kgf-cm, 83 ft.lbs. torque). From here elevate the rear axle housing using a suitable jack placement. The sway bar links require removal after unscrewing the 2 nuts and the sway bar link at 69 Nm (704 kgf-cm, 51 ft. lbs.). Apply a hexagon wrench to stabilize the ball joint stud when the nut has this feature. Apply the same steps to the remaining side of the vehicle. Obtain the sway bar kit from the rear axle housing by unbolting all 4 hardware fasteners with the sway bar kit, bushings and brackets while applying torque at 37 Nm (377 kgf-cm, 27 ft. lbs.). Detach the 2 brackets together with the 2 bushings from the sway bar kit at the end of the process.

OEM 2005 Toyota Sequoia Sway Bar Kit

Stabilizer Sway Bar Set

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Sway Bar Kits found

View related parts
2005 Toyota Sequoia Stabilizer Bar, Front
Part Number: 48811-AF030
$151.68 MSRP: $214.72
You Save: $63.04 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer; Suspension Stabilizer Bar, Front; Sway Bar; Bar, Stabilizer, Front
- Manufacturer Note: W(REAR STABILIZER)
- Position: Front
- Part Name Code: 48811
- Item Weight: 7.50 Pounds
- Item Dimensions: 43.8 x 12.0 x 4.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48811-AF030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2005 Toyota Sequoia Submodels:
- Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
2005 Toyota Sequoia Stabilizer Bar, Front
Part Number: 48811-AF040
$146.28 MSRP: $207.08
You Save: $60.80 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer; Suspension Stabilizer Bar, Front; Sway Bar; Bar, Stabilizer, Front
- Manufacturer Note: W(AIR SUSPENSION)
- Position: Front
- Part Name Code: 48811
- Item Weight: 7.50 Pounds
- Item Dimensions: 43.4 x 12.0 x 4.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48811-AF040
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2005 Toyota Sequoia Submodels:
- Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
2005 Toyota Sequoia Stabilizer Bar, Rear
Part Number: 48812-AF020
$128.06 MSRP: $181.29
You Save: $53.23 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer, Rear; Suspension Stabilizer Bar, Rear; Sway Bar
- Position: Rear
- Part Name Code: 48812
- Item Weight: 5.20 Pounds
- Item Dimensions: 41.6 x 9.1 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48812-AF020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2005 Toyota Sequoia Submodels:
- Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
2005 Toyota Sequoia Stabilizer Bar, Rear
Part Number: 48812-AF010
$119.02 MSRP: $168.49
You Save: $49.47 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer, Rear; Suspension Stabilizer Bar, Rear; Sway Bar
- Manufacturer Note: W(SUN ROOF)
- Position: Rear
- Part Name Code: 48812
- Item Weight: 5.10 Pounds
- Item Dimensions: 42.0 x 9.1 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48812-AF010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2005 Toyota Sequoia Submodels:
- Limited, SR5 | 8 Cyl 4.7 L GAS

2005 Toyota Sequoia Sway Bar Kit

Looking for affordable OEM 2005 Toyota Sequoia Sway Bar Kit? Explore our comprehensive catalogue of genuine 2005 Toyota Sequoia Sway Bar Kit. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2005 Toyota Sequoia Parts Questions & Experts Answers

Q: How to remove the rear Sway Bar Kit on 2005 Toyota Sequoia?
A: The process of sway bar kit removal starts by removing the rear wheels at 110 Nm (1,150 kgf-cm, 83 ft.lbs. torque). From here elevate the rear axle housing using a suitable jack placement. The sway bar links require removal after unscrewing the 2 nuts and the sway bar link at 69 Nm (704 kgf-cm, 51 ft. lbs.). Apply a hexagon wrench to stabilize the ball joint stud when the nut has this feature. Apply the same steps to the remaining side of the vehicle. Obtain the sway bar kit from the rear axle housing by unbolting all 4 hardware fasteners with the sway bar kit, bushings and brackets while applying torque at 37 Nm (377 kgf-cm, 27 ft. lbs.). Detach the 2 brackets together with the 2 bushings from the sway bar kit at the end of the process.