How to reassemble the front shock absorber on 2005 Toyota Sequoia?

The front shock absorber assembly starts with placing a spring compressor on the coil spring for compression until the required length is achieved without over-compression. The installation of the shock absorber coil spring requires putting the lower end into the spring seat opening. Place the cushion and then position both retainers and suspension support onto the piston rod before tightening a new suspension support center nut temporarily. Check the direction of the suspension support and avoid standing directly above the shock absorber when positioning it correctly. Finally, torque the suspension center nut to 25 Nm (250 kgf-cm, 18 ft. lbs.).

OEM 2005 Toyota Sequoia Shock Absorber

Suspension Shock Absorber

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Shock Absorbers found

View related parts
2005 Toyota Sequoia Shock Absorber
Part Number: 48510-A9580
$141.34 MSRP: $200.08
You Save: $58.74 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly, Shock; Suspension Kit; Strut Assembly; Shock Set; Strut Kit; Complete Strut; Strut; Absorber Assembly, Shock, Front Passenger Side; Absorber Assembly, Shock, Front Driver Side; Shock
- Manufacturer Note: MARK 48510-AF150,W(AIR SUSPENSION)
- Item Weight: 1.40 Pounds
- Item Dimensions: 26.4 x 8.4 x 7.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48510-A9580
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2005 Toyota Sequoia Submodels:
- Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
2005 Toyota Sequoia Shock Absorber
Part Number: 48510-A9600
$139.93 MSRP: $198.09
You Save: $58.16 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly, Shock; Suspension Kit; Strut Assembly; Shock Set; Strut Kit; Complete Strut; Absorber Assembly, Shock, Front Passenger Side; Absorber Assembly, Shock, Front Driver Side; Shock
- Manufacturer Note: MARK 48510-AF170,W(AIR SUSPENSION)
- Item Weight: 7.80 Pounds
- Item Dimensions: 26.9 x 8.4 x 7.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48510-A9600
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2005 Toyota Sequoia Submodels:
- Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
2005 Toyota Sequoia Shock Absorber
Part Number: 48510-A9590
$142.28 MSRP: $201.42
You Save: $59.14 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly, Shock; Suspension Kit; Strut Assembly; Shock Set; Strut Kit; Complete Strut; Strut; Absorber Assembly, Shock, Front Passenger Side; Absorber Assembly, Shock, Front Driver Side; Shock
- Manufacturer Note: MARK 48510-AF160
- Item Weight: 8.70 Pounds
- Item Dimensions: 27.1 x 8.4 x 7.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48510-A9590
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2005 Toyota Sequoia Submodels:
- Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
2005 Toyota Sequoia Shock Absorber, Rear
Part Number: 48530-A9460
$93.84 MSRP: $131.72
You Save: $37.88 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Set, Rear; Suspension Shock Kit; Strut Assembly; Complete Strut; Shock; Absorber Assembly, Shock, Rear Passenger Side; Absorber Assembly, Shock, Rear Driver Side
- Manufacturer Note: MARK 48530-AF030
- Position: Rear
- Item Weight: 6.60 Pounds
- Item Dimensions: 26.9 x 6.8 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48530-A9460
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2005 Toyota Sequoia Submodels:
- Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
2005 Toyota Sequoia Shock Absorber, Rear
Part Number: 48530-A9490
$92.30 MSRP: $129.55
You Save: $37.25 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Set, Rear; Suspension Shock Kit; Strut Assembly; Complete Strut; Shock; Absorber Assembly, Shock, Rear Passenger Side; Absorber Assembly, Shock, Rear Driver Side
- Manufacturer Note: MARK 48530-AF060
- Position: Rear
- Item Weight: 6.40 Pounds
- Item Dimensions: 26.1 x 6.6 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48530-A9490
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2005 Toyota Sequoia Submodels:
- Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
2005 Toyota Sequoia Shock Absorber, Rear
Part Number: 48530-A9470
$89.57 MSRP: $125.74
You Save: $36.17 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Set, Rear; Suspension Shock Kit; Strut Assembly; Complete Strut; Shock; Absorber Assembly, Shock, Rear Passenger Side; Absorber Assembly, Shock, Rear Driver Side
- Manufacturer Note: MARK 48530-AF040,W(AIR SUSPENSION)
- Position: Rear
- Item Weight: 7.00 Pounds
- Item Dimensions: 26.4 x 6.8 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48530-A9470
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2005 Toyota Sequoia Submodels:
- Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
2005 Toyota Sequoia Shock Absorber, Rear
Part Number: 48530-A9480
$89.34 MSRP: $125.40
You Save: $36.06 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Set, Rear; Suspension Shock Kit; Strut Assembly; Complete Strut; Shock; Absorber Assembly, Shock, Rear Passenger Side; Absorber Assembly, Shock, Rear Driver Side
- Manufacturer Note: MARK 48530-AF050
- Position: Rear
- Item Weight: 6.70 Pounds
- Item Dimensions: 26.4 x 6.7 x 5.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48530-A9480
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2005 Toyota Sequoia Submodels:
- Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
2005 Toyota Sequoia Shock Absorber
Part Number: 48530-80190
$397.92 MSRP: $583.15
You Save: $185.23 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly, Shock; Rear Shock Absorber; Suspension Kit; Strut Assembly; Shock Set; Strut Kit; Absorber Assembly, Shock, Rear Passenger Side; Absorber Assembly, Shock, Rear Driver Side; Shock
- Manufacturer Note: MARK 48530-34040
- Item Weight: 6.90 Pounds
- Item Dimensions: 25.6 x 6.5 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48530-80190
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2005 Toyota Sequoia Submodels:
- Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
2005 Toyota Sequoia Shock Absorber
Part Number: 48530-80189
$382.60 MSRP: $560.70
You Save: $178.10 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly, Shock; Rear Shock Absorber; Suspension Kit; Strut Assembly; Shock Set; Strut Kit; Absorber Assembly, Shock, Rear Passenger Side; Absorber Assembly, Shock, Rear Driver Side; Shock
- Manufacturer Note: MARK 48530-34030
- Item Weight: 6.70 Pounds
- Item Dimensions: 26.1 x 6.7 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48530-80189
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2005 Toyota Sequoia Submodels:
- Limited, SR5 | 8 Cyl 4.7 L GAS

2005 Toyota Sequoia Shock Absorber

Looking for affordable OEM 2005 Toyota Sequoia Shock Absorber? Explore our comprehensive catalogue of genuine 2005 Toyota Sequoia Shock Absorber. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2005 Toyota Sequoia Shock Absorber Parts Q&A

Q: How to reassemble the front shock absorber on 2005 Toyota Sequoia?
A: The front shock absorber assembly starts with placing a spring compressor on the coil spring for compression until the required length is achieved without over-compression. The installation of the shock absorber coil spring requires putting the lower end into the spring seat opening. Place the cushion and then position both retainers and suspension support onto the piston rod before tightening a new suspension support center nut temporarily. Check the direction of the suspension support and avoid standing directly above the shock absorber when positioning it correctly. Finally, torque the suspension center nut to 25 Nm (250 kgf-cm, 18 ft. lbs.).

Alternate Year Models

2004 Toyota Sequoia Shock Absorber 2006 Toyota Sequoia Shock Absorber