Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

Toyota 48812-AF020
Stabilizer Bar, Rear

2001-2007 Toyota Sequoia 48812AF020

Customer Questions & Expert Answers (9)
Toyota 48812-AF020 Stabilizer Bar, Rear
  • Part Description
    Bar, Stabilizer, Rear; Suspension Stabilizer Bar, Rear; Sway Bar
  • Part Name Code
    48812
  • Position
    Rear
  • Manufacturer
    Toyota
Make sure this part fits
$128.06 MSRP: $181.29
You Save: $53.23 (30%)
Ships in 1-3 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers

  • 48812-AF020 Stabilizer Bar, Rear is Ref No. 8 in the diagram below

    2004 Toyota Sequoia Stabilizer Bar, Rear Diagram for 48812-AF020
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 48812-AF020

  • Product Specifications

    BrandGenuine Toyota
    Part Name Code48812
    Manufacturer Part Number48812-AF020
    Part DescriptionBar, Stabilizer, Rear; Suspension Stabilizer Bar, Rear; Sway Bar
    Item Dimensions41.6 x 9.1 x 3.4 inches
    Item Weight5.20 Pounds
    PositionRear
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerToyota
    SKU48812-AF020
    WarrantyThis genuine Toyota part is guaranteed by Toyota's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65

  • Vehicle Fitment

    Year Make Model Trim Engine
    2001-2007 Toyota SequoiaLimited, SR58 Cyl 4.7 L GAS

  • Customer Questions & Expert Answers

    Q:
    Will 48812-AF020 fit my vehicle? Posted by ToyotaPartsNow Specialist
    A:
    Find out if part number 48812-AF020 is the right fit for your car by Selecting Your Vehicle model.
    Posted by ToyotaPartsNow Specialist
    Q:
    What is the torque reading for the nut on the front stabilizer link for the 2006 Toyota Sequoia? Posted by Customer
    A:
    Use a torque wrench to turn the nut continuously for a torque reading of 0.05 - 2.0 Nm (0.5 - 20 kgf-cm, 0.4 - 17 inch lbs.).
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Sway Bar Kit
    Q:
    What should be done after removing the rear wheels for the 2005 Toyota Sequoia? Posted by Customer
    A:
    Support the rear axle housing with a jack.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Sway Bar Kit
    Q:
    What is the final step in connecting the stabilizer bar links for the 2001 Toyota Sequoia? Posted by Customer
    A:
    Connect the stabilizer bar links to the lower suspension arm with a torque of 69 Nm (700 kgf-cm, 51 ft. lbs.); if the ball joint turns with the nut, use a hexagon (6 mm) wrench to hold the nut.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Sway Bar Kit
    Q:
    What is the next step after disconnecting the stabilizer bar links for the 2004 Toyota Sequoia? Posted by Customer
    A:
    Remove the stabilizer bar by taking out the 2 bolts, nuts, and the bar along with the cushions and brackets, then detach the 2 brackets and cushions from the bar.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Sway Bar Kit
    Q:
    What is the procedure to disconnect the rear stabilizer link for the 2007 Toyota Sequoia? Posted by Customer
    A:
    Remove the 2 nuts and stabilizer bar link, applying a torque of 69 Nm (704 kgf-cm, 51 ft. lbs.). If the ball joint stud turns with the nut, use a hexagon wrench to hold the stud, and repeat this procedure on the other side.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Sway Bar Kit
    Q:
    What is the first step to service and repair the rear stabilizer bar for the 2002 Toyota Sequoia? Posted by Customer
    A:
    Begin by removing the rear wheels, ensuring a torque of 110 Nm (1,150 kgf-cm, 83 ft. lbs.) is applied.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Sway Bar Kit
    Q:
    What is the first step to service and repair the rear stabilizer bar for the 2001 Toyota Sequoia? Posted by Customer
    A:
    Begin by removing the rear wheels, ensuring a torque of 110 Nm (1,150 kgf-cm, 83 ft. lbs.).
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Sway Bar Kit
    Q:
    What is the final step after servicing the stabilizer bar for the 2003 Toyota Sequoia? Posted by Customer
    A:
    Installation follows the reverse order of removal.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Sway Bar Kit
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Toyota 48812-AF020, Excellent Performance and Perfect Fitment

To ensure reliability, purchase Toyota part # 48812-AF020 Stabilizer Bar, Rear. It is sometimes referred to as Toyota Sway Bar Kit. OEM parts are unrivaled in terms of quality. They go through extensive quality control inspections and are produced in accordance with Toyota's official factory specifications. All of these remove defects and imperfections. So you can relax knowing they promise exceptional lifespan and flawless fitment.

ToyotaPartsNow.com is a leading supplier of genuine Toyota parts such as Toyota 48812AF020 Stabilizer Bar, Rear. At ToyotaPartsNow.com, we have a wide variety of OEM Toyota parts available at competitive prices. Our comprehensive range of genuine Toyota parts come with a manufacturer's warranty for peace of mind. We also prioritize customer satisfaction, providing a hassle-free return policy and expedited delivery for all our parts. For detailed Toyota parts information, click here.
Choose ToyotaPartsNow for discounted prices, exceptional service and fast delivery