How to replace the rear wheel bearing on 2004 Toyota Highlander?

The procedure starts with removing the rear wheel as the first step for bearing replacement. The left-hand rear disc brake caliper assembly separation starts by unscrewing the bolt that detaches the flexible hose before you remove the two brake caliper bolts and securely mount the caliper. You should disconnect the speed sensor wire by removing its connector after removing the rear disc. The next step is to remove the rear axle hub assembly from the left-hand side through removal of its four bolts. You should install the new axle hub by attaching it with four bolts while tightening them to 80 Nm torque (816 kgf-cm, 59 ft. lbs.). Complete the speed sensor wire connection through the reattachment of the electrical connector. Set a dial indicator near the central point of the axle hub to measure backlash until reaching the maximum allowed value of 0.0 mm (0.0 inch). The axle hub assembly requires replacement if any existing backlash measurement exceeds this standard. An axle hub assembly needs replacement if the maximum deviation of 0.08 mm (0.0031 inch) is exceeded when measuring with a dial indicator at the surface of the hub outside its bolt position. Reinstall the rear disc and the rear disc brake caliper assembly to the left-hand side using two bolts that require 78 Nm (800 kgf-cm, 58 ft. lbs.) torque and a flexible hose bolt that needs 19 Nm (194 kgf-cm, 14 ft. lbs.) torque for installation. A proper torque of 103 Nm (1,050 kgf-cm, 76 ft. lbs.) should be applied to the rear wheel and after that check the alignment of the wheel and verify the ABS speed sensor signal.

OEM 2004 Toyota Highlander Wheel Bearing

Hub Bearing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Wheel Bearings found

View related parts
2004 Toyota Highlander Hub Assembly, Front
Part Number: 43502-0E030
$130.65 MSRP: $184.95
You Save: $54.30 (30%)
ADD TO CART
Product Specifications
- Other Name: Hub Sub-Assembly, Front Axle; Wheel Hub, Front; Front Hub & Bearing; Front Hub; Hub
- Position: Front
- Replaces: 43502-AA021, 43502-28100, 43502-08010, 43502-AA020
- Item Weight: 5.10 Pounds
- Item Dimensions: 6.6 x 6.9 x 4.6 inches
- Condition: New
- SKU: 43502-0E030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2004 Toyota Highlander Submodels:
- Base, Hybrid, Hybrid Limited, Limited, SE, Sport | 4 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS
View related parts
2004 Toyota Highlander Wheel Bearing
Part Number: 90080-36193
$102.30 MSRP: $143.60
You Save: $41.30 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Radial Ball; Wheel Bearing, Front, Front Left, Front Right; Wheel Bearing Kit; Front Wheel Bearing for Passenger and Driver Side Axle Hub.
- Replaces: 90363-A0001, 90369-45005, 90369-45003
- Item Weight: 2.40 Pounds
- Item Dimensions: 3.7 x 3.7 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90080-36193
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2004 Toyota Highlander Submodels:
- Base, Hybrid, Hybrid Limited, Limited, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.3 L GAS
View related parts
2004 Toyota Highlander Hub & Bearing Assembly, Rear Axle, Passenger Side
Part Number: 42410-0E050
$323.57 MSRP: $461.97
You Save: $138.40 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub&Bearing Assembly; Rear Axle, Driver Side; Wheel Hub Repair Kit; Wheel Bearing Kit; Axle Bearing
- Replaces: 42410-48041, 42410-0E021, 42410-48040
- Item Weight: 8.30 Pounds
- Item Dimensions: 6.9 x 6.9 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 42410-0E050
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2004 Toyota Highlander Submodels:
- Base, Hybrid, Hybrid Limited, Limited, Plus, SE, Sport | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS
View related parts
2004 Toyota Highlander Bearing (For Front Drive Shaft)
Part Number: 90080-36133
$31.18 MSRP: $43.39
You Save: $12.21 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Radial Ball; Wheel Bearing; Axle Bearing
- Replaces: 90363-41002, 90369-41001
- Part Name Code: 43410C
- Item Weight: 1.10 Pounds
- Item Dimensions: 3.2 x 1.0 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90080-36133
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2004 Toyota Highlander Submodels:
- Base, Hybrid, Hybrid LE, Hybrid Limited, Hybrid Limited Platinum, Hybrid XLE, LE, LE Plus, Limited, Limited Platinum, Plus, SE, Sport, XLE | 4 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS
View related parts
2004 Toyota Highlander Hub Assembly, Front
Part Number: 43502-28090
$129.36 MSRP: $183.12
You Save: $53.76 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub Sub-Assembly, Front Axle; Wheel Hub, Front; Front Hub; Hub; Hub Sub-Assembly, Front Axle, Passenger Side; Hub Sub-Assembly, Front Axle, Driver Side; Wheel Hub
- Manufacturer Note: (J)
- Position: Front
- Replaces: 43502-AA010, 43502-AA011
- Item Weight: 4.10 Pounds
- Item Dimensions: 6.7 x 6.7 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 43502-28090
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2004 Toyota Highlander Submodels:
- Base, Limited, SE, Sport | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS
View related parts
2004 Toyota Highlander Hub&Bearing Assembly, Rear Axle
Part Number: 42460-0E010
$507.55 MSRP: $743.82
You Save: $236.27 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: HUB & BRG ASSY, RR A; Wheel Bearing and Hub Assembly; Wheel Hub Repair Kit; Wheel Bearing; Axle Bearing; Wheel Hub
- Position: Rear Driver Side
- Replaces: 42460-48030
- Item Weight: 9.90 Pounds
- Item Dimensions: 7.1 x 6.8 x 5.3 inches
- Condition: New
- SKU: 42460-0E010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2004 Toyota Highlander Submodels:
- Base, Hybrid, Hybrid Limited, Limited, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.3 L GAS
View related parts
2004 Toyota Highlander Hub&Bearing Assembly, Rear Axle
Part Number: 42450-0E010
$507.55 MSRP: $743.82
You Save: $236.27 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: HUB & BRG ASSY, RR A; Wheel Bearing and Hub Assembly; Wheel Hub Repair Kit; Wheel Bearing; Axle Bearing; Wheel Hub
- Position: Rear Passenger Side
- Replaces: 42450-48030
- Item Weight: 10.00 Pounds
- Item Dimensions: 7.0 x 6.5 x 5.1 inches
- Condition: New
- SKU: 42450-0E010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2004 Toyota Highlander Submodels:
- Base, Hybrid, Hybrid Limited, Limited, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.3 L GAS

2004 Toyota Highlander Wheel Bearing

Looking for affordable OEM 2004 Toyota Highlander Wheel Bearing? Explore our comprehensive catalogue of genuine 2004 Toyota Highlander Wheel Bearing. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2004 Toyota Highlander Parts Questions & Experts Answers

Q: How to replace the rear wheel bearing on 2004 Toyota Highlander?
A: The procedure starts with removing the rear wheel as the first step for bearing replacement. The left-hand rear disc brake caliper assembly separation starts by unscrewing the bolt that detaches the flexible hose before you remove the two brake caliper bolts and securely mount the caliper. You should disconnect the speed sensor wire by removing its connector after removing the rear disc. The next step is to remove the rear axle hub assembly from the left-hand side through removal of its four bolts. You should install the new axle hub by attaching it with four bolts while tightening them to 80 Nm torque (816 kgf-cm, 59 ft. lbs.). Complete the speed sensor wire connection through the reattachment of the electrical connector. Set a dial indicator near the central point of the axle hub to measure backlash until reaching the maximum allowed value of 0.0 mm (0.0 inch). The axle hub assembly requires replacement if any existing backlash measurement exceeds this standard. An axle hub assembly needs replacement if the maximum deviation of 0.08 mm (0.0031 inch) is exceeded when measuring with a dial indicator at the surface of the hub outside its bolt position. Reinstall the rear disc and the rear disc brake caliper assembly to the left-hand side using two bolts that require 78 Nm (800 kgf-cm, 58 ft. lbs.) torque and a flexible hose bolt that needs 19 Nm (194 kgf-cm, 14 ft. lbs.) torque for installation. A proper torque of 103 Nm (1,050 kgf-cm, 76 ft. lbs.) should be applied to the rear wheel and after that check the alignment of the wheel and verify the ABS speed sensor signal.