How to service and repair the rear Sway Bar Kit on 2002 Toyota Sequoia?

The service process for the rear sway bar kit begins with removing the rear wheels so ensure a torque of 110 Nm (1,150 kgf-cm, 83 ft. lbs.) is applied before proceeding. Lift the rear axle housing with a jack while removing the sway bar links by unfastening their 2 nuts and sway bar link at 69 Nm (704 kgf-cm, 51 ft. lbs.). The hexagon wrench should be used for holding the stud when the ball joint stud rotates with the nut. Proceed to the opposite side for this procedure. Use a torque wrench to unscrew the 4 bolts retaining the rear axle housing sway bar kit together with its bushings and brackets until they reach 37 Nm (377 kgf-cm, 27 ft. lbs.). Remove the sway bar kit by detaching its two brackets and two bushings following the procedure. The sway bar link needs inspection by turning the ball joint stud throughout all directions before replacing this link when the motion is not smooth or free. The final procedure involves doing installation according to the reverse sequence of removal steps.

OEM 2002 Toyota Sequoia Sway Bar Kit

Stabilizer Sway Bar Set

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Sway Bar Kits found

View related parts
2002 Toyota Sequoia Stabilizer Bar, Front
Part Number: 48811-AF021
$127.83 MSRP: $180.96
You Save: $53.13 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer, Front; Suspension Stabilizer Bar, Front; Sway Bar
- Manufacturer Note: OFF ROAD PACKAGE
- Position: Front
- Part Name Code: 48811
- Item Weight: 7.50 Pounds
- Item Dimensions: 43.8 x 12.0 x 5.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48811-AF021
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2002 Toyota Sequoia Submodels:
- Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
2002 Toyota Sequoia Stabilizer Bar, Front
Part Number: 48811-AF030
$151.68 MSRP: $214.72
You Save: $63.04 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer; Suspension Stabilizer Bar, Front; Sway Bar; Bar, Stabilizer, Front
- Manufacturer Note: W(REAR STABILIZER)
- Position: Front
- Part Name Code: 48811
- Item Weight: 7.50 Pounds
- Item Dimensions: 43.8 x 12.0 x 4.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48811-AF030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2002 Toyota Sequoia Submodels:
- Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
2002 Toyota Sequoia Stabilizer Bar, Rear
Part Number: 48812-AF020
$128.06 MSRP: $181.29
You Save: $53.23 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer, Rear; Suspension Stabilizer Bar, Rear; Sway Bar
- Position: Rear
- Part Name Code: 48812
- Item Weight: 5.20 Pounds
- Item Dimensions: 41.6 x 9.1 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48812-AF020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2002 Toyota Sequoia Submodels:
- Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
2002 Toyota Sequoia Stabilizer Bar, Rear
Part Number: 48812-AF010
$119.02 MSRP: $168.49
You Save: $49.47 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer, Rear; Suspension Stabilizer Bar, Rear; Sway Bar
- Manufacturer Note: W(SUN ROOF)
- Position: Rear
- Part Name Code: 48812
- Item Weight: 5.10 Pounds
- Item Dimensions: 42.0 x 9.1 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48812-AF010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2002 Toyota Sequoia Submodels:
- Limited, SR5 | 8 Cyl 4.7 L GAS

2002 Toyota Sequoia Sway Bar Kit

Looking for affordable OEM 2002 Toyota Sequoia Sway Bar Kit? Explore our comprehensive catalogue of genuine 2002 Toyota Sequoia Sway Bar Kit. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2002 Toyota Sequoia Parts Questions & Experts Answers

Q: How to service and repair the rear Sway Bar Kit on 2002 Toyota Sequoia?
A: The service process for the rear sway bar kit begins with removing the rear wheels so ensure a torque of 110 Nm (1,150 kgf-cm, 83 ft. lbs.) is applied before proceeding. Lift the rear axle housing with a jack while removing the sway bar links by unfastening their 2 nuts and sway bar link at 69 Nm (704 kgf-cm, 51 ft. lbs.). The hexagon wrench should be used for holding the stud when the ball joint stud rotates with the nut. Proceed to the opposite side for this procedure. Use a torque wrench to unscrew the 4 bolts retaining the rear axle housing sway bar kit together with its bushings and brackets until they reach 37 Nm (377 kgf-cm, 27 ft. lbs.). Remove the sway bar kit by detaching its two brackets and two bushings following the procedure. The sway bar link needs inspection by turning the ball joint stud throughout all directions before replacing this link when the motion is not smooth or free. The final procedure involves doing installation according to the reverse sequence of removal steps.