How to service and repair the rear Sway Bar Kit on 2003 Toyota Sequoia?

The first step to fix the rear sway bar kit begins with removing the rear wheels while applying 110 Nm (1,150 kgf-cm, 83 ft. lbs.) of torque. Place a jack under the rear axle housing before you remove the sway bar links by unfastening their 2 nuts and link, while applying a torques of 69 Nm (704 kgf-cm, 51 ft. lbs.). A hexagon wrench should be used for holding the ball joint stud when it turns with the nut. Complete this procedure on the second wheel side. Start by unscrewing the 4 bolts of the rear axle housing sway bar kit while also removing the bar itself with the bushings and brackets until the torque reaches 37 Nm (377 kgf-cm, 27 ft. lbs.). The following step requires users to separate both brackets from the sway bar kit together with the bushings. An inspection of the sway bar link requires ball joint stud rotation in all directions until smooth free movement to determine if replacement is needed. Throughout installation the same steps are performed in the opposite direction of removal.

OEM 2003 Toyota Sequoia Sway Bar Kit

Stabilizer Sway Bar Set

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Sway Bar Kits found

View related parts
2003 Toyota Sequoia Stabilizer Bar, Front
Part Number: 48811-AF021
$127.83 MSRP: $180.96
You Save: $53.13 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer, Front; Suspension Stabilizer Bar, Front; Sway Bar
- Manufacturer Note: OFF ROAD PACKAGE
- Position: Front
- Part Name Code: 48811
- Item Weight: 7.50 Pounds
- Item Dimensions: 43.8 x 12.0 x 5.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48811-AF021
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2003 Toyota Sequoia Submodels:
- Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
2003 Toyota Sequoia Stabilizer Bar, Front
Part Number: 48811-AF030
$151.68 MSRP: $214.72
You Save: $63.04 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer; Suspension Stabilizer Bar, Front; Sway Bar; Bar, Stabilizer, Front
- Manufacturer Note: W(REAR STABILIZER)
- Position: Front
- Part Name Code: 48811
- Item Weight: 7.50 Pounds
- Item Dimensions: 43.8 x 12.0 x 4.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48811-AF030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2003 Toyota Sequoia Submodels:
- Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
2003 Toyota Sequoia Stabilizer Bar, Rear
Part Number: 48812-AF020
$128.06 MSRP: $181.29
You Save: $53.23 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer, Rear; Suspension Stabilizer Bar, Rear; Sway Bar
- Position: Rear
- Part Name Code: 48812
- Item Weight: 5.20 Pounds
- Item Dimensions: 41.6 x 9.1 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48812-AF020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2003 Toyota Sequoia Submodels:
- Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
2003 Toyota Sequoia Stabilizer Bar, Rear
Part Number: 48812-AF010
$119.02 MSRP: $168.49
You Save: $49.47 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer, Rear; Suspension Stabilizer Bar, Rear; Sway Bar
- Manufacturer Note: W(SUN ROOF)
- Position: Rear
- Part Name Code: 48812
- Item Weight: 5.10 Pounds
- Item Dimensions: 42.0 x 9.1 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48812-AF010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2003 Toyota Sequoia Submodels:
- Limited, SR5 | 8 Cyl 4.7 L GAS

2003 Toyota Sequoia Sway Bar Kit

Looking for affordable OEM 2003 Toyota Sequoia Sway Bar Kit? Explore our comprehensive catalogue of genuine 2003 Toyota Sequoia Sway Bar Kit. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2003 Toyota Sequoia Parts Questions & Experts Answers

Q: How to service and repair the rear Sway Bar Kit on 2003 Toyota Sequoia?
A: The first step to fix the rear sway bar kit begins with removing the rear wheels while applying 110 Nm (1,150 kgf-cm, 83 ft. lbs.) of torque. Place a jack under the rear axle housing before you remove the sway bar links by unfastening their 2 nuts and link, while applying a torques of 69 Nm (704 kgf-cm, 51 ft. lbs.). A hexagon wrench should be used for holding the ball joint stud when it turns with the nut. Complete this procedure on the second wheel side. Start by unscrewing the 4 bolts of the rear axle housing sway bar kit while also removing the bar itself with the bushings and brackets until the torque reaches 37 Nm (377 kgf-cm, 27 ft. lbs.). The following step requires users to separate both brackets from the sway bar kit together with the bushings. An inspection of the sway bar link requires ball joint stud rotation in all directions until smooth free movement to determine if replacement is needed. Throughout installation the same steps are performed in the opposite direction of removal.