How to service the ignition coil on 2001 Toyota Sequoia?

Service the ignition coil by detaching the ignition coil connectors followed by removing each ignition coil fixture from the spark plugs by unboltting and pulling out the ignition coil. This procedure should be repeated for all eight ignition coils. The bolt should be used to connect ignition coils (with igniters) to spark plugs before torquing them to 7.5 N.m (80 kg.cm, 66 in.lb) and then connecting the ignition coil (with igniter) connectors.

OEM 2001 Toyota Sequoia Ignition Coil

Ignition Coil Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Ignition Coil found

View related parts
2001 Toyota Sequoia Coil, Ignition
Part Number: 90919-02259
$86.26 MSRP: $121.08
You Save: $34.82 (29%)
ADD TO CART
Product Specifications
- Other Name: Direct Ignition Coil; Ignition Coil
- Replaces: 90919-02249, 90080-19027
- Item Weight: 0.90 Pounds
- Item Dimensions: 3.5 x 2.1 x 8.8 inches
- Condition: New
- SKU: 90919-02259
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2001 Toyota Sequoia Submodels:
- Limited, SR5 | 8 Cyl 4.7 L GAS

2001 Toyota Sequoia Ignition Coil

Looking for affordable OEM 2001 Toyota Sequoia Ignition Coil? Explore our comprehensive catalogue of genuine 2001 Toyota Sequoia Ignition Coil. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2001 Toyota Sequoia Parts Questions & Experts Answers

Q: How to service the ignition coil on 2001 Toyota Sequoia?
A: Service the ignition coil by detaching the ignition coil connectors followed by removing each ignition coil fixture from the spark plugs by unboltting and pulling out the ignition coil. This procedure should be repeated for all eight ignition coils. The bolt should be used to connect ignition coils (with igniters) to spark plugs before torquing them to 7.5 N.m (80 kg.cm, 66 in.lb) and then connecting the ignition coil (with igniter) connectors.