OEM 2001 Toyota Sequoia Knock Sensor

2001 Toyota Sequoia Parts Questions & Experts Answers

• Q: How to service and repair the Knock Sensor on 2001 Toyota Sequoia?

  A: Service and repair of the Knock Sensor demands users to remove the throttle body cover followed by removing the intake air connector and disconnecting the throttle body from the intake manifolds. The technician should start by removing the upper and lower intake manifolds assembly. The sensor installation requires Special Service Tool: 09816-30010 which requires torque settings of 45 N.m (450 kg.cm, 33 ft.lb). Service the Knock Sensor by first replacing the sensor using Special Service Tool 09816-30010, after which reconnect the knock sensor connectors and reinstall the upper and lower intake manifolds assembly followed by the throttle body to the intake manifolds along with the intake air connector and throttle body cover.