How to service the ignition coil on 2002 Toyota Sequoia?

The starting point for servicing the ignition coil requires disconnecting the connectors attached to the ignition coil with igniter. The service of ignition coils (with igniter) begins with disconnecting connectors before removing ignition coils (with igniter) through bolt removal followed by extraction of each coil and igniter unit from the spark plugs. You should start by installing the ignition coils (with igniter) onto their spark plugs before tightening the bolt while making sure you have placed all 8 ignition coils (with igniter) correctly. The technician should torque the bolts to 7.5 N.m (80 kgf.cm, 66 in.lbf) and reattach the ignition coil (with igniter) connectors.

OEM 2002 Toyota Sequoia Ignition Coil

Ignition Coil Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Ignition Coil found

View related parts
2002 Toyota Sequoia Coil, Ignition
Part Number: 90919-02259
$86.26 MSRP: $121.08
You Save: $34.82 (29%)
ADD TO CART
Product Specifications
- Other Name: Direct Ignition Coil; Ignition Coil
- Replaces: 90919-02249, 90080-19027
- Item Weight: 0.90 Pounds
- Item Dimensions: 3.5 x 2.1 x 8.8 inches
- Condition: New
- SKU: 90919-02259
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2002 Toyota Sequoia Submodels:
- Limited, SR5 | 8 Cyl 4.7 L GAS

2002 Toyota Sequoia Ignition Coil

Looking for affordable OEM 2002 Toyota Sequoia Ignition Coil? Explore our comprehensive catalogue of genuine 2002 Toyota Sequoia Ignition Coil. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2002 Toyota Sequoia Parts Questions & Experts Answers

Q: How to service the ignition coil on 2002 Toyota Sequoia?
A: The starting point for servicing the ignition coil requires disconnecting the connectors attached to the ignition coil with igniter. The service of ignition coils (with igniter) begins with disconnecting connectors before removing ignition coils (with igniter) through bolt removal followed by extraction of each coil and igniter unit from the spark plugs. You should start by installing the ignition coils (with igniter) onto their spark plugs before tightening the bolt while making sure you have placed all 8 ignition coils (with igniter) correctly. The technician should torque the bolts to 7.5 N.m (80 kgf.cm, 66 in.lbf) and reattach the ignition coil (with igniter) connectors.