How to service the ignition coil on 2003 Toyota Sequoia?

Before servicing the ignition coil you must disconnect its connectors and remove the ignition coils with igniters from the spark plugs by unbolted the coils then pull them out before repeating this process for all eight ignition coils with igniters. The installation requires attachment of ignition coils (with igniter) to spark plugs through the bolt while tightening to 7.5 N.m (80 kgf.cm, 66 in.lbf) torque followed by reattaching the ignition coil (with igniter) connectors.

OEM 2003 Toyota Sequoia Ignition Coil

Ignition Coil Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Ignition Coil found

View related parts
2003 Toyota Sequoia Coil, Ignition
Part Number: 90919-02259
$86.26 MSRP: $121.08
You Save: $34.82 (29%)
ADD TO CART
Product Specifications
- Other Name: Direct Ignition Coil; Ignition Coil
- Replaces: 90919-02249, 90080-19027
- Item Weight: 0.90 Pounds
- Item Dimensions: 3.5 x 2.1 x 8.8 inches
- Condition: New
- SKU: 90919-02259
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2003 Toyota Sequoia Submodels:
- Limited, SR5 | 8 Cyl 4.7 L GAS

2003 Toyota Sequoia Ignition Coil

Looking for affordable OEM 2003 Toyota Sequoia Ignition Coil? Explore our comprehensive catalogue of genuine 2003 Toyota Sequoia Ignition Coil. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2003 Toyota Sequoia Parts Questions & Experts Answers

Q: How to service the ignition coil on 2003 Toyota Sequoia?
A: Before servicing the ignition coil you must disconnect its connectors and remove the ignition coils with igniters from the spark plugs by unbolted the coils then pull them out before repeating this process for all eight ignition coils with igniters. The installation requires attachment of ignition coils (with igniter) to spark plugs through the bolt while tightening to 7.5 N.m (80 kgf.cm, 66 in.lbf) torque followed by reattaching the ignition coil (with igniter) connectors.