Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

Toyota 89544-02070
ABS Sensor

2006-2011 Toyota 8954402070

Customer Questions & Expert Answers (16)
Toyota 89544-02070 ABS Sensor
  • Part Description
    Sensor, Skid Control
  • Manufacturer
    Toyota
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers

  • 89544-02070 ABS Sensor is Ref No. 5 in the diagram below

    2009 Toyota Matrix ABS Sensor Diagram for 89544-02070
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 89544-02070

  • Product Specifications

    BrandGenuine Toyota
    Manufacturer Part Number89544-02070
    Part DescriptionSensor, Skid Control
    Other NamesSpeed Sensor; Modulator Valve; Rear Speed Sensor; Sensor Ring
    ConditionNew
    ManufacturerToyota
    SKU89544-02070
    WarrantyThis genuine Toyota part is guaranteed by Toyota's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65

  • Vehicle Fitment

    Year Make Model Trim Engine
    2008-2011 Scion xDBase4 Cyl 1.8 L GAS
    2009-2010 Toyota CorollaBase, LE, S, XLE, XRS4 Cyl 1.8 L GAS, 4 Cyl 2.4 L GAS
    2009-2010 Toyota MatrixBase, S, XRS4 Cyl 1.8 L GAS, 4 Cyl 2.4 L GAS
    2006-2008 Toyota RAV4Base, Limited, Sport4 Cyl 2.4 L GAS, 6 Cyl 3.5 L GAS
    2007-2011 Toyota YarisBase, S4 Cyl 1.5 L GAS

  • Customer Questions & Expert Answers

    Q:
    Can you provide the right 89544-02070 for my car? Posted by ToyotaPartsNow Specialist
    A:
    Find out if part number 89544-02070 is the right fit for your car by Selecting Your Vehicle model.
    Posted by ToyotaPartsNow Specialist
    Q:
    What tools are needed to remove the speed sensor from the rear axle hub for the 2008 Scion xD? Posted by Customer
    A:
    Use a pin punch and hammer to remove the 2 pins from Special Service Tool: 09520-00040, and then use Special Service Tool: 09520-00031 and the 2 bolts (90101-12007) to remove the speed sensor.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Speed Sensor
    Q:
    What precautions should be taken during the process for the 2009 Scion xD? Posted by Customer
    A:
    Take care not to damage the speed sensor or rear axle hub contact surfaces and ensure the sensor rotor is free of foreign matter.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Speed Sensor
    Q:
    What checks should be performed after installing the rear wheel for the 2009 Scion xD? Posted by Customer
    A:
    Inspect the rear wheel alignment, check the ABS sensor signal without VSC, and check the VSC sensor signal with VSC.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Speed Sensor
    Q:
    What follows after securing the No. 1 sensor clamp for the 2010 Scion xD? Posted by Customer
    A:
    Secure the No. 2 sensor clamp onto the body with a bolt, torqued to 6.0 Nm (61 kgf-cm, 53 in-lbf).
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Speed Sensor
    Q:
    Are the installation steps different for TMMC and NUMMI Made for the 2009 Toyota Corolla? Posted by Customer
    A:
    No, follow the same installation steps as above for TMMC and NUMMI Made.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Speed Sensor
    Q:
    What is the next step after removing the hinge covers for the 2009 Toyota Matrix? Posted by Customer
    A:
    Take out the rear seatback assembly for both sides.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Speed Sensor
    Q:
    How do you secure the battery for the 2006 Toyota RAV4? Posted by Customer
    A:
    Tighten the bolt to 8.5 Nm (87 kgf-cm, 75 inch lbs.) and the nut to 5.0 Nm (51 kgf-cm, 44 inch lbs.).
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Speed Sensor
    Q:
    How do you install the front wheel for the 2009 Toyota Matrix? Posted by Customer
    A:
    Install it with a torque of 103 Nm (1050 kgf-cm, 76 ft-lbf).
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Speed Sensor
    Q:
    How do you secure the speed sensor for the 2008 Toyota RAV4? Posted by Customer
    A:
    Secure the sensor with a bolt, ensuring a torque of 11 Nm (112 kgf-cm, 8 ft-lbf).
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Speed Sensor
    Q:
    What is the next step after installing the sensor clip for the 2007 Toyota RAV4? Posted by Customer
    A:
    Set the sensor clamp (labeled G) on the side member and tighten it with the bolt (labeled H) to 8.5 N.m (87 kgf.cm, 75 in.lbf), ensuring not to twist the sensor wire.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Speed Sensor
    Q:
    What components need to be installed for the 2009 Toyota Yaris? Posted by Customer
    A:
    Install the outer cowl top panel, front air shutter seal, cowl side ventilator sub-assembly LH and RH, and front wiper arm and blade assembly RH.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Speed Sensor
    Q:
    How do you install the front speed sensor for the 2009 Toyota Yaris? Posted by Customer
    A:
    First, attach it to the steering knuckle using the bolt with a torque of 8.5 Nm (87 kgf-cm, 75 in-lbf). Ensure the speed sensor tip and installation area are free of foreign matter and that the sensor is not turned from its original angle.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Speed Sensor
    Q:
    What is the final step after all installations for the 2008 Toyota Yaris? Posted by Customer
    A:
    Check the ABS sensor signal.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Speed Sensor
    Q:
    What are the final steps after installing the speed sensor for the 2007 Toyota Yaris? Posted by Customer
    A:
    Install the 3 clips, reconnect the speed sensor connector, attach the speed sensor clip to the body, reinstall the front fender liner, and ensure the speed sensor wire does not protrude.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Speed Sensor
    Q:
    What is the next step after attaching the speed sensor for the 2010 Toyota Yaris? Posted by Customer
    A:
    Secure the clamp onto the shock absorber with a bolt, torqued to 29 Nm (300 kgf-cm, 22 ft-lbf).
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Speed Sensor
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Toyota 89544-02070, Excellent Performance and Perfect Fitment

To ensure reliability, purchase Toyota part # 89544-02070 ABS Sensor. It is sometimes referred to as Toyota Speed Sensor, Toyota ABS Pump And Motor Assembly. OEM parts are unrivaled in terms of quality. They go through extensive quality control inspections and are produced in accordance with Toyota's official factory specifications. All of these remove defects and imperfections. So you can relax knowing they promise exceptional lifespan and flawless fitment.

ToyotaPartsNow.com is a leading supplier of genuine Toyota parts such as Toyota 8954402070 ABS Sensor. At ToyotaPartsNow.com, we have a wide variety of OEM Toyota parts available at competitive prices. Our comprehensive range of genuine Toyota parts come with a manufacturer's warranty for peace of mind. We also prioritize customer satisfaction, providing a hassle-free return policy and expedited delivery for all our parts. For detailed Toyota parts information, click here.
Choose ToyotaPartsNow for discounted prices, exceptional service and fast delivery