Toyota 90947-A2019
Flex Hose, Passenger Side

It is necessary to mark both the RH and LH rear brake flexible hoses when disconnecting them altogether. Start the procedure by removing the rear wheel then draining the brake fluid before cleaning off leaking fluid from painted components. The removal of a rear flexible hose on Torsion Beam Type Suspension requires firstly the bolt removal connecting it to the rear axle beam and afterward removing the union bolt and gasket to detach the hose from the rear disc brake cylinder assembly. The brake line requires a 10 mm union nut wrench for disconnection but the rear flexible hose should be gripped by another wrench to avoid line kinking or damage and stop outside objects from moving into the brake line. Finish the process by taking away the clip along with the rear flexible hose. The Double Wishbone Type Suspension repair process begins by disassembling the rear flexible hose from the rear disc brake cylinder assembly through removal of the union bolt and gasket. Next, use the union nut wrench (10 mm) to detach the brake line while maintaining a secure hold on the rear flexible hose with a wrench. Additionally, avoid flexing or damaging the brake line and stop any foreign material from entering its path before removing the clip and the rear flexible hose.

Next, remove the front wheel.