How to install the front lower ball joint on Toyota Tundra?

First position the lower ball joint of the front lower ball joint by lifting the upper suspension arm together with the steering knuckle. Afterward install the four bolts temporarily. The lower ball joint installation involves securing it to the lower suspension arm by using the set nut and new cotter pin while applying torque of 140 Nm (1,450 kgf-cm, 103 ft. lbs.). An extra 60 degrees of torque should be added when the holes on the cotter pin are misaligned. The procedure continues by fastening the tie rod end to the lower ball joint while using a new cotter pin and tightening the nut to 91 Nm (930 kgf-cm, 67 ft. lbs.) strength. If the holes on the cotter pin are misaligned the nut should be tightened by an additional 60 degrees. Follow by securing the four lower ball joint bolts to 80 Nm torque (820 kgf-cm, 59 ft. lbs.) then set the front wheel using 110 Nm torque (1,150 kgf-cm, 83 ft. lbs.). Alignment checking should be the last step.

How to remove the front upper ball joint on Toyota Tundra?

The initial step to take off the front upper ball joint requires removal of the steering knuckle with axle hub. You must first get rid of the upper ball joint by completing wire and boot removal and using a snap ring expander to disconnect the snap ring. End the upper ball joint removal process using deep socket wrenches paired with Special Service Tool: 09950-40011 (which includes 09951-04010, 09952-04010, 09953-04020, 09954-04010, 09955-04031, 09957-04010, 09958-04011).

OEM Toyota Tundra Ball Joint

Control Arm Joint

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Ball Joints found

View related parts
Toyota Tundra Upper Ball Joint, Front
Part Number: 43310-39016
$49.94 MSRP: $69.51
You Save: $19.57 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Joint Assembly, Front Upper Ball; Suspension Ball Joint, Front Upper; Upper Ball Joints; Front Upper Ball Joint Assembly for Driver & Passenger Side.
- Position: Front Upper
- Replaces: 43310-39085, 43310-39065
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2000-2006 Toyota Tundra | Base, Limited, SR5 | 6 Cyl 3.4 L GAS, 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
Toyota Tundra Lower Ball Joint, Driver Side
Part Number: 48626-0C011
$116.95 MSRP: $164.16
You Save: $47.21 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Attachment, Lower Ball; Suspension Control Arm Bracket, Left; Ball Joint; Control Arm Bracket; Attachment, Front Lower Ball Joint, Driver Side
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2007-2021 Toyota Tundra | 1794 Edition, Base, Limited, Nightshade, Platinum, SR, SR5, Trail, TRD Pro | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
Toyota Tundra Lower Ball Joint, Passenger Side
Part Number: 48625-0C011
$124.07 MSRP: $175.64
You Save: $51.57 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Attachment, Lower Ball; Suspension Control Arm Bracket, Right; Ball Joint; Control Arm Bracket; Attachment, Front Lower Ball Joint, Passenger Side
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2007-2021 Toyota Tundra | 1794 Edition, Base, Limited, Nightshade, Platinum, SR, SR5, Trail, TRD Pro | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
Toyota Tundra Lower Ball Joint, Front Driver Side
Part Number: 43340-39595
$147.10 MSRP: $208.24
You Save: $61.14 (30%)
ADD TO CART
Product Specifications
- Other Name: Joint Assembly, Lower Ball; Suspension Ball Joint, Front Left Lower; Joint Assembly, Lower Ball, Front Driver Side; Suspension Ball Joint; Ball Joint
- Position: Front Driver Side
- Replaces: 43340-39495, 43340-39575, 43340-39515
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2004-2006 Toyota Tundra | Base, Limited, SR5 | 6 Cyl 3.4 L GAS, 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
Toyota Tundra Lower Ball Joint, Front Driver Side
Part Number: 43340-39485
$132.06 MSRP: $186.95
You Save: $54.89 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Joint Assembly, Lower Ball; Suspension Ball Joint, Front Left Lower; Joint Assembly, Lower Ball, Front Driver Side; Suspension Ball Joint; Ball Joint
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2003 Toyota Tundra | Base, Limited, SR5 | 6 Cyl 3.4 L GAS, 8 Cyl 4.7 L GAS
View related parts
Toyota Tundra Lower Ball Joint, Front Driver Side
Part Number: 43340-39356
$108.65 MSRP: $152.52
You Save: $43.87 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Joint Assembly, Lower Ball; Suspension Ball Joint, Front Left Lower; Joint Assembly, Lower Ball, Front Driver Side; Suspension Ball Joint; Ball Joint
- Position: Front Driver Side
- Replaces: 43340-39355
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2000-2002 Toyota Tundra | Base, Limited, SR5 | 6 Cyl 3.4 L GAS, 8 Cyl 4.7 L GAS
View related parts
Toyota Tundra Lower Ball Joint, Front Passenger Side
Part Number: 43330-39825
$145.81 MSRP: $206.40
You Save: $60.59 (30%)
ADD TO CART
Product Specifications
- Other Name: Joint Assembly, Lower Ball; Suspension Ball Joint, Front Right Lower; Joint Assembly, Lower Ball, Front Passenger Side; Suspension Ball Joint; Ball Joint
- Position: Front Passenger Side
- Replaces: 43330-39615, 43330-39805, 43330-39655
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2004-2006 Toyota Tundra | Base, Limited, SR5 | 6 Cyl 3.4 L GAS, 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
Toyota Tundra Lower Ball Joint, Front Passenger Side
Part Number: 43330-39605
$132.06 MSRP: $186.95
You Save: $54.89 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Joint Assembly, Lower Ball; Suspension Ball Joint, Front Right Lower; Joint Assembly, Lower Ball, Front Passenger Side; Suspension Ball Joint; Ball Joint
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2003 Toyota Tundra | Base, Limited, SR5 | 6 Cyl 3.4 L GAS, 8 Cyl 4.7 L GAS
View related parts
Toyota Tundra Lower Ball Joint, Front Passenger Side
Part Number: 43330-39466
$108.65 MSRP: $152.52
You Save: $43.87 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Joint Assembly, Lower Ball; Suspension Ball Joint, Front Right Lower; Joint Assembly, Lower Ball, Front Passenger Side; Suspension Ball Joint; Ball Joint
- Position: Front Passenger Side
- Replaces: 43330-39465
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2000-2002 Toyota Tundra | Base, Limited, SR5 | 6 Cyl 3.4 L GAS, 8 Cyl 4.7 L GAS

Toyota Tundra Ball Joint

Choose genuine Ball Joint that pass strict quality control tests. You can trust the top quality and lasting durability. Shopping for OEM Ball Joint for your Toyota Tundra? Our website is your one-stop destination. We stock an extensive selection of genuine Toyota Tundra parts. The price is affordable so you can save more. It only takes minutes to browse and find the exact fit. Easily add to cart and check out fast. Our hassle-free return policy will keep you stress-free. We process orders quickly for swift delivery. Your parts will arrive faster, so you can get back on the road sooner.

The Ball Joint in Toyota Tundra means that it is a joining component that links the steering knuckles with the control arms in order to make possible movement of the suspension as well as steering. This one permits vertical and horizontal adjustment of the vehicle and thus it helps maintain alignment to the road conditions. Usual of steel construction, a ball joint comprises of a bearing stud and socket; these are usually covered by rubber boot to shield the joint from dirt and retain the lubricant. Non Load bearing tundra models may well use ball joints which are of a type different from those listed above. There are load-bearing joints which are designed to bear the weight of the vehicle and non-load bearing joints which are designed only to guide the vehicle. Ball joints are prone to wearing in the course of product use and when they have not been adequately lubricated; they exhibit signs such as noise as well as misalignment. Yes, custom performance options are available, such as ball joint for modified suspensions that allow for prime control and tire wear.

Toyota Tundra Ball Joint Parts and Q&A

Lower Ball Joint, Front Driver Side
43340-39595
Q: How to install the front lower ball joint on Toyota Tundra?
A:
First position the lower ball joint of the front lower ball joint by lifting the upper suspension arm together with the Steering Knuckle. Afterward install the four bolts temporarily. The lower ball joint installation involves securing it to the lower suspension arm by using the set nut and new cotter pin while applying torque of 140 Nm (1,450 kgf-cm, 103 ft. lbs.). An extra 60 degrees of torque should be added when the holes on the cotter pin are misaligned. The procedure continues by fastening the tie rod end to the lower ball joint while using a new cotter pin and tightening the nut to 91 Nm (930 kgf-cm, 67 ft. lbs.) strength. If the holes on the cotter pin are misaligned the nut should be tightened by an additional 60 degrees. Follow by securing the four lower ball joint bolts to 80 Nm torque (820 kgf-cm, 59 ft. lbs.) then set the front wheel using 110 Nm torque (1,150 kgf-cm, 83 ft. lbs.). Alignment checking should be the last step.
Lower Ball Joint, Front Passenger Side
43330-39825
Q: How to remove the front upper ball joint on Toyota Tundra?
A:
The initial step to take off the front upper ball joint requires removal of the steering knuckle with axle hub. You must first get rid of the upper ball joint by completing wire and boot removal and using a snap ring expander to disconnect the snap ring. End the upper ball joint removal process using deep socket wrenches paired with Special Service Tool: 09950-40011 (which includes 09951-04010, 09952-04010, 09953-04020, 09954-04010, 09955-04031, 09957-04010, 09958-04011).

Related Toyota Tundra Parts

Browse Toyota Tundra Ball Joint by Years

2021 2020 2019 2018 2017 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003 2002 2001 2000