My Garage
Cart
Make sure this part fits

Toyota 43340-39595
Lower Ball Joint, Front Driver Side

2004-2007 Toyota 4334039595

Customer Questions & Expert Answers (9)
Toyota 43340-39595 Lower Ball Joint, Front Driver Side
Toyota 43340-39595 Lower Ball Joint, Front Driver Side
  • Part Description
    Joint Assembly, Lower Ball; Suspension Ball Joint, Front Left Lower
  • Part Name Code
    43340A
  • Position
    Front Driver Side
  • Replaces
    43340-39495, 43340-39575, 43340-39515
  • Manufacturer
    Toyota
Make sure this part fits
$147.07 MSRP: $208.20
You Save: $61.13 (30%)
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Toyota
    Part Name Code43340A
    Manufacturer Part Number43340-39595
    Part DescriptionJoint Assembly, Lower Ball; Suspension Ball Joint, Front Left Lower
    Other NamesJoint Assembly, Lower Ball, Front Driver Side; Suspension Ball Joint; Ball Joint
    Item Dimensions5.5 x 3.2 x 2.4 inches
    Item Weight3.30 Pounds
    PositionFront Driver Side
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces43340-39495, 43340-39575, 43340-39515
    ManufacturerToyota
    SKU43340-39595
    WarrantyThis genuine Toyota part is guaranteed by Toyota's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2007 Toyota SequoiaLimited, SR58 Cyl 4.7 L GAS
    2004-2006 Toyota TundraBase, Limited, SR56 Cyl 3.4 L GAS, 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
  • Customer Questions & Expert Answers

    Q:
    Will 43340-39595 fit my vehicle? Posted by ToyotaPartsNow Specialist
    A:
    Find out if part number 43340-39595 is the right fit for your car by Selecting Your Vehicle model.
    Posted by ToyotaPartsNow Specialist
    Q:
    What is the torque specification for installing the front wheel for the 2005 Toyota Sequoia? Posted by Customer
    A:
    Install the front wheel with a torque of 110 Nm (1,150 kgf-cm, 83 ft. lbs.).
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Ball Joint
    Q:
    What is the first step to service and repair the lower ball joint for the 2004 Toyota Sequoia? Posted by Customer
    A:
    Remove the front wheel.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Ball Joint
    Q:
    What is the first step to service and repair the front upper ball joint for the 2006 Toyota Sequoia? Posted by Customer
    A:
    Remove the steering knuckle with the axle hub, followed by the front upper ball joint.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Ball Joint
    Q:
    How do you secure the lower ball joint to the lower suspension arm for the 2006 Toyota Tundra? Posted by Customer
    A:
    Temporarily install the 4 bolts to the lower ball joint, then install the set nut to secure it along with a new cotter pin, tightening to a torque of 159 Nm (1,620 kgf-cm, 117 ft-lbf). If the cotter pin holes are misaligned, tighten the nut further up to 60°.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Ball Joint
    Q:
    What is the process for removing the lower ball joint for the 2004 Toyota Tundra? Posted by Customer
    A:
    Take off the cotter pin and nut, then use Special Service Tool: 09628-62011 to disconnect it from the lower suspension arm.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Ball Joint
    Q:
    What should be done after connecting the tie rod end for the 2005 Toyota Tundra? Posted by Customer
    A:
    Proceed to tighten the 4 bolts of the lower ball joint to a torque of 80 Nm (820 kgf-cm, 59 ft. lbs.).
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Ball Joint
    Q:
    What is the first step in servicing and repairing the front lower ball joint for the 2007 Toyota Sequoia? Posted by Customer
    A:
    Begin with an on-vehicle inspection by removing the front wheel and installing the hub nuts to the disc.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Ball Joint
    Q:
    What tools are needed for the installation of a new ball joint for the 2006 Toyota Tundra? Posted by Customer
    A:
    Use Special Service Tool: 09309-37010 and a socket wrench to install a new ball joint.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Ball Joint
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Toyota 43340-39595, Excellent Performance and Perfect Fitment

To ensure reliability, purchase Toyota part # 43340-39595 Lower Ball Joint, Front Driver Side. It is sometimes referred to as Toyota Ball Joint. OEM parts are unrivaled in terms of quality. They go through extensive quality control inspections and are produced in accordance with Toyota's official factory specifications. All of these remove defects and imperfections. So you can relax knowing they promise exceptional lifespan and flawless fitment.

ToyotaPartsNow.com is a leading supplier of genuine Toyota parts such as Toyota 4334039595 Lower Ball Joint, Front Driver Side. At ToyotaPartsNow.com, we have a wide variety of OEM Toyota parts available at competitive prices. Our comprehensive range of genuine Toyota parts come with a manufacturer's warranty for peace of mind. We also prioritize customer satisfaction, providing a hassle-free return policy and expedited delivery for all our parts. For detailed Toyota parts information, click here.
Choose ToyotaPartsNow for discounted prices, exceptional service and fast delivery