My Garage
Cart
Make sure this part fits

Toyota 43330-39825
Lower Ball Joint, Front Passenger Side

2004-2007 Toyota 4333039825

Customer Questions & Expert Answers (9)
Toyota 43330-39825 Lower Ball Joint, Front Passenger Side
Toyota 43330-39825 Lower Ball Joint, Front Passenger Side
  • Part Description
    Joint Assembly, Lower Ball; Suspension Ball Joint, Front Right Lower
  • Part Name Code
    43330K
  • Position
    Front Passenger Side
  • Replaces
    43330-39615, 43330-39805, 43330-39655
  • Manufacturer
    Toyota
Make sure this part fits
$145.77 MSRP: $206.35
You Save: $60.58 (30%)
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Toyota
    Part Name Code43330K
    Manufacturer Part Number43330-39825
    Part DescriptionJoint Assembly, Lower Ball; Suspension Ball Joint, Front Right Lower
    Other NamesJoint Assembly, Lower Ball, Front Passenger Side; Suspension Ball Joint; Ball Joint
    Item Dimensions5.4 x 3.3 x 2.4 inches
    Item Weight5.10 Pounds
    PositionFront Passenger Side
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces43330-39615, 43330-39805, 43330-39655
    ManufacturerToyota
    SKU43330-39825
    WarrantyThis genuine Toyota part is guaranteed by Toyota's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2007 Toyota SequoiaLimited, SR58 Cyl 4.7 L GAS
    2004-2006 Toyota TundraBase, Limited, SR56 Cyl 3.4 L GAS, 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
  • Customer Questions & Expert Answers

    Q:
    Will 43330-39825 fit my vehicle? Posted by ToyotaPartsNow Specialist
    A:
    Find out if part number 43330-39825 is the right fit for your car by Selecting Your Vehicle model.
    Posted by ToyotaPartsNow Specialist
    Q:
    What should be done after installing the snap ring for the 2006 Toyota Sequoia? Posted by Customer
    A:
    Install a new boot secured with a new wire, using the grease supplied in the kit, and reinstall the steering knuckle with the axle hub.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Ball Joint
    Q:
    What is the torque specification for the lower ball joint set 4 bolts for the 2004 Toyota Sequoia? Posted by Customer
    A:
    Tighten to 80 Nm (820 kgf-cm, 59 ft. lbs.).
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Ball Joint
    Q:
    How do you disconnect the lower ball joint from the lower suspension arm for the 2007 Toyota Sequoia? Posted by Customer
    A:
    Remove the cotter pin and nut, then use Special Service Tool: 09628-62011 to disconnect it from the lower suspension arm, and remove the 4 lower ball joint set bolts.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Ball Joint
    Q:
    What is the torque specification for tightening the 4 bolts of the lower ball joint for the 2005 Toyota Sequoia? Posted by Customer
    A:
    Tighten the 4 bolts to a torque of 65 Nm (663 kgf-cm, 48 ft. lbs.).
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Ball Joint
    Q:
    What should be done after removing the lower ball joint set bolts for the 2004 Toyota Tundra? Posted by Customer
    A:
    While lifting the upper suspension arm and steering knuckle, take out the lower ball joint, ensuring to support them securely.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Ball Joint
    Q:
    What special tool is required to detach the upper ball joint for the 2006 Toyota Tundra? Posted by Customer
    A:
    Employ Special Service Tool: 09950-40011 (along with other specified tools) and a deep socket wrench.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Ball Joint
    Q:
    What is the first step to install the FRONT LOWER BALL JOINT for the 2005 Toyota Tundra? Posted by Customer
    A:
    Begin by lifting the upper suspension arm and steering knuckle to position the lower ball joint, then temporarily install the 4 bolts.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Ball Joint
    Q:
    What is the procedure for tightening the nut on the lower ball joint for the 2006 Toyota Tundra? Posted by Customer
    A:
    Using a torque wrench, turn the nut continuously 1 turn per 2 - 4 seconds and take the torque reading on the 5th turn, aiming for a turning torque of 0.1 - 2.5 Nm (1 - 25 kgf-cm, 1 - 22 in.lbf).
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Ball Joint
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Toyota 43330-39825, Excellent Performance and Perfect Fitment

To ensure reliability, purchase Toyota part # 43330-39825 Lower Ball Joint, Front Passenger Side. It is sometimes referred to as Toyota Ball Joint. OEM parts are unrivaled in terms of quality. They go through extensive quality control inspections and are produced in accordance with Toyota's official factory specifications. All of these remove defects and imperfections. So you can relax knowing they promise exceptional lifespan and flawless fitment.

ToyotaPartsNow.com is a leading supplier of genuine Toyota parts such as Toyota 4333039825 Lower Ball Joint, Front Passenger Side. At ToyotaPartsNow.com, we have a wide variety of OEM Toyota parts available at competitive prices. Our comprehensive range of genuine Toyota parts come with a manufacturer's warranty for peace of mind. We also prioritize customer satisfaction, providing a hassle-free return policy and expedited delivery for all our parts. For detailed Toyota parts information, click here.
Choose ToyotaPartsNow for discounted prices, exceptional service and fast delivery