How to install the oil cooler and complete the associated assembly steps on Toyota Land Cruiser?

Installation begins by applying engine oil on a new gasket before installing it to the oil cooler spacer followed by attaching the oil cooler spacer onto the oil filter bracket by tightening a bolt to 10 Nm (102 kgf-cm, 7 ft-lbf). After applying engine oil to two fresh O-rings, place them on the oil cooler and fix the cooler into position using 5 nuts which require torque of 21 Nm (214 kgf-cm, 15 ft-lbf). To install the oil filter bracket, place engine oil on pair of new O-rings which will go into the timing chain cover and then attach the bracket with 2 nuts and 2 bolts by applying 35 Nm (357 kgf-cm, 26 ft-lbf) torque. Fasten the No. 1 oil cooler bracket to the cylinder block with 2 nuts while torquing them to 21 Nm (214 kgf-cm, 15 ft-lbf). Secure the water by-pass hose with 3 bolts that need torquing to 10 Nm (102 kgf-cm, 7 ft-lbf). The work continues with the installation of both the cooler compressor assembly and an oil pressure sender gauge assembly before the oil filter element gets substituted. Put in the fan and generator V belt and place the V-bank cover sub-assembly after. Place the required engine fluids before applying the cable to the negative terminal of the battery. Induction of the No. 1 engine under cover sub-assembly needs to happen together with the installation of front fender splash shield sub-assemblies on both sides before inspecting oil and coolant conditions.

OEM Toyota Land Cruiser Oil Cooler

Engine Oil Cooler

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Oil Coolers found

View related parts
Toyota Land Cruiser Oil Cooler
Part Number: 44420-60221
$405.13 MSRP: $593.72
You Save: $188.59 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cooler Assembly, Oil; Power Steering Cooler; Oil Cooler Assembly
- Replaces: 44420-60220
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1993-1997 Toyota Land Cruiser | Base | 6 Cyl 4.5 L GAS
View related parts
Toyota Land Cruiser Oil Cooler
Part Number: 15710-61010
$715.38 MSRP: $1048.39
You Save: $333.01 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cooler Assembly, Oil
- Manufacturer Note: CALIFORNIA SPEC.
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1984-1992 Toyota Land Cruiser | Base | 6 Cyl 4.0 L GAS, 6 Cyl 4.2 L GAS
View related parts
Toyota Land Cruiser Oil Cooler
Part Number: 15710-0S010
$616.48 MSRP: $903.45
You Save: $286.97 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cooler Assembly, Oil; Engine Oil Cooler
- Replaces: 15710-38021
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2013-2021, 2008-2011 Toyota Land Cruiser | Base, Heritage Edition | 8 Cyl 5.7 L GAS
View related parts
Toyota Land Cruiser Cooler Assembly, Oil W/Hose
Part Number: 32920-60191
$531.40 MSRP: $778.76
You Save: $247.36 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cooler Assembly, Oil With Hose; Automatic Transmission Oil Cooler
- Replaces: 32920-60190
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2013-2021, 2008-2011 Toyota Land Cruiser | Base, Heritage Edition | 8 Cyl 5.7 L GAS
View related parts
Toyota Land Cruiser Transmission Cooler
Part Number: 32910-60161
$435.03 MSRP: $637.55
You Save: $202.52 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cooler Assembly, Oil; Automatic Transmission Oil Cooler
- Replaces: 32910-60160
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2013-2021, 2008-2011 Toyota Land Cruiser | Base, Heritage Edition | 8 Cyl 5.7 L GAS
View related parts
Toyota Land Cruiser Transmission Cooler
Part Number: 32910-60130
$678.04 MSRP: $993.67
You Save: $315.63 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cooler Assembly, Oil; Automatic Transmission Oil Cooler
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1998-2007 Toyota Land Cruiser | Base | 8 Cyl 4.7 L GAS
View related parts
Toyota Land Cruiser Oil Cooler
Part Number: 15710-54030
$776.41 MSRP: $1137.83
You Save: $361.42 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cooler Assembly, Oil
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1993-1997 Toyota Land Cruiser | Base | 6 Cyl 4.5 L GAS
View related parts
Toyota Land Cruiser Oil Cooler
Part Number: 15710-50020
$692.30 MSRP: $1014.58
You Save: $322.28 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cooler Assembly, Oil; Engine Oil Cooler; Oil Cooler Assembly
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1998-2007 Toyota Land Cruiser | Base | 8 Cyl 4.7 L GAS
View related parts
Toyota Land Cruiser Cooler Assembly, Oil
Part Number: 32910-60110
Product Specifications
- Replaces: 32910-60070
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1991-1997 Toyota Land Cruiser | Base | 6 Cyl 4.0 L GAS, 6 Cyl 4.5 L GAS

Toyota Land Cruiser Oil Cooler

If you're thinking about purchasing OEM parts for your Toyota Land Cruiser, our website is your one-stop destination. We stock an extensive selection of genuine Toyota Land Cruiser Oil Cooler at pocket-friendly prices. Plus, we guarantee a swift delivery and a hassle-free return policy for your convenience.

Toyota Land Cruiser Oil Cooler Parts Questions & Experts Answers

Oil Cooler
15710-0S010
Q: How to install the oil cooler and complete the associated assembly steps on Toyota Land Cruiser?
A: Installation begins by applying engine oil on a new gasket before installing it to the oil cooler spacer followed by attaching the oil cooler spacer onto the oil filter bracket by tightening a bolt to 10 Nm (102 kgf-cm, 7 ft-lbf). After applying engine oil to two fresh O-rings, place them on the oil cooler and fix the cooler into position using 5 nuts which require torque of 21 Nm (214 kgf-cm, 15 ft-lbf). To install the oil filter bracket, place engine oil on pair of new O-rings which will go into the timing chain cover and then attach the bracket with 2 nuts and 2 bolts by applying 35 Nm (357 kgf-cm, 26 ft-lbf) torque. Fasten the No. 1 oil cooler bracket to the cylinder block with 2 nuts while torquing them to 21 Nm (214 kgf-cm, 15 ft-lbf). Secure the water by-pass hose with 3 bolts that need torquing to 10 Nm (102 kgf-cm, 7 ft-lbf). The work continues with the installation of both the cooler compressor assembly and an oil pressure sender gauge assembly before the oil filter element gets substituted. Put in the fan and generator V belt and place the V-bank cover sub-assembly after. Place the required engine fluids before applying the cable to the negative terminal of the battery. Induction of the No. 1 engine under cover sub-assembly needs to happen together with the installation of front fender splash shield sub-assemblies on both sides before inspecting oil and coolant conditions.