Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

Toyota 15710-0S010
Oil Cooler

2007-2022 Toyota 157100S010

Customer Questions & Expert Answers (10)
Toyota 15710-0S010 Oil Cooler
  • Part Description
    Cooler Assembly, Oil; Engine Oil Cooler
  • Part Name Code
    15710
  • Replaces
    15710-38021
  • Manufacturer
    Toyota
Make sure this part fits
$616.48 MSRP: $903.45
You Save: $286.97 (32%)
Ships in 1-3 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers

  • 15710-0S010 Oil Cooler is Ref No. 38 in the diagram below

    2009 Toyota Sequoia Oil Cooler Diagram for 15710-0S010
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 15710-0S010

  • Product Specifications

    BrandGenuine Toyota
    Part Name Code15710
    Manufacturer Part Number15710-0S010
    Part DescriptionCooler Assembly, Oil; Engine Oil Cooler
    Item Dimensions5.6 x 4.8 x 3.3 inches
    Item Weight1.40 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces15710-38021
    ManufacturerToyota
    SKU15710-0S010
    WarrantyThis genuine Toyota part is guaranteed by Toyota's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65

  • Vehicle Fitment

    Year Make Model Trim Engine
    2013-2021, 2008-2011 Toyota Land CruiserBase, Heritage Edition8 Cyl 5.7 L GAS
    2008-2022 Toyota SequoiaLimited, Nightshade, Platinum, SR5, TRD Pro, TRD Sport8 Cyl 4.6 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
    2007-2021 Toyota Tundra1794 Edition, Base, Limited, Nightshade, Platinum, SR, SR5, Trail, TRD Pro6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS

  • Customer Questions & Expert Answers

    Q:
    Is 15710-0S010 a good match for my car? Posted by ToyotaPartsNow Specialist
    A:
    Find out if part number 15710-0S010 is the right fit for your car by Selecting Your Vehicle model.
    Posted by ToyotaPartsNow Specialist
    Q:
    How to install the oil cooler and complete the associated assembly steps on Toyota Land Cruiser? Posted by Customer
    A:
    Installation begins by applying engine oil on a new gasket before installing it to the oil cooler spacer followed by attaching the oil cooler spacer onto the oil filter bracket by tightening a bolt to 10 Nm (102 kgf-cm, 7 ft-lbf). After applying engine oil to two fresh O-rings, place them on the oil cooler and fix the cooler into position using 5 nuts which require torque of 21 Nm (214 kgf-cm, 15 ft-lbf). To install the oil filter bracket, place engine oil on pair of new O-rings which will go into the timing chain cover and then attach the bracket with 2 nuts and 2 bolts by applying 35 Nm (357 kgf-cm, 26 ft-lbf) torque. Fasten the No. 1 oil cooler bracket to the cylinder block with 2 nuts while torquing them to 21 Nm (214 kgf-cm, 15 ft-lbf). Secure the water by-pass hose with 3 bolts that need torquing to 10 Nm (102 kgf-cm, 7 ft-lbf). The work continues with the installation of both the cooler compressor assembly and an oil pressure sender gauge assembly before the oil filter element gets substituted. Put in the fan and generator V belt and place the V-bank cover sub-assembly after. Place the required engine fluids before applying the cable to the negative terminal of the battery. Induction of the No. 1 engine under cover sub-assembly needs to happen together with the installation of front fender splash shield sub-assemblies on both sides before inspecting oil and coolant conditions.
    Posted by ToyotaPartsNow Specialist
    Q:
    How do you remove the No. 2 water by-pass pipe sub-assembly for the 2009 Toyota Land Cruiser? Posted by Customer
    A:
    Take out the 3 bolts and disconnect the 4 hoses.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Oil Cooler
    Q:
    What should be inspected after completing the installation for the 2008 Toyota Land Cruiser? Posted by Customer
    A:
    Inspect for oil and coolant leaks, check the engine oil level.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Oil Cooler
    Q:
    What are the next steps after connecting the hoses for the 2009 Toyota Tundra? Posted by Customer
    A:
    Install the oil filter sub-assembly, add engine oil, and add engine coolant.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Oil Cooler
    Q:
    How do you remove the oil cooler assembly for the 2009 Toyota Sequoia? Posted by Customer
    A:
    Disconnect the two oil cooler hoses from the oil cooler, remove the union bolt, plate washer, and the oil cooler itself.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Oil Cooler
    Q:
    How should the oil cooler be positioned during installation for the 2008 Toyota Sequoia? Posted by Customer
    A:
    Fit the fork part of the oil cooler onto the rib of the oil cooler bracket.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Oil Cooler
    Q:
    What is the first step to service the engine oil cooler for the 2007 Toyota Tundra? Posted by Customer
    A:
    Begin by removing the V-bank cover and draining the engine coolant.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Oil Cooler
    Q:
    What is the first step to install the oil cooler assembly for the 2UZ-FE lubrication system for the 2009 Toyota Sequoia? Posted by Customer
    A:
    Clean the oil cooler contact surface on the cooler mounting.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Oil Cooler
    Q:
    What should be done to the new O-ring before installation for the 2008 Toyota Tundra? Posted by Customer
    A:
    Apply a light coat of engine oil to the new O-ring and install it into the oil cooler.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Oil Cooler
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Toyota 15710-0S010, Excellent Performance and Perfect Fitment

To ensure reliability, purchase Toyota part # 15710-0S010 Oil Cooler. It is sometimes referred to as Toyota Oil Cooler. OEM parts are unrivaled in terms of quality. They go through extensive quality control inspections and are produced in accordance with Toyota's official factory specifications. All of these remove defects and imperfections. So you can relax knowing they promise exceptional lifespan and flawless fitment.

ToyotaPartsNow.com is a leading supplier of genuine Toyota parts such as Toyota 157100S010 Oil Cooler. At ToyotaPartsNow.com, we have a wide variety of OEM Toyota parts available at competitive prices. Our comprehensive range of genuine Toyota parts come with a manufacturer's warranty for peace of mind. We also prioritize customer satisfaction, providing a hassle-free return policy and expedited delivery for all our parts. For detailed Toyota parts information, click here.
Choose ToyotaPartsNow for discounted prices, exceptional service and fast delivery