OEM Toyota FJ Cruiser Clock Spring

Toyota FJ Cruiser Clock Spring Parts Questions & Experts Answers

• Clockspring
  84306-07040
  Q: How to install the Clock Spring correctly on Toyota FJ Cruiser?

  A: Installation of the clock spring should start with both front wheels oriented directly ahead while the turn signal switch stands at neutral to stop pin damage. The installation of 4 screws will secure the clock spring while you should remove the lock pin before mounting a new steering wheel assembly. Attachment of connectors to the clock spring must be done with caution because Air Bag wire harness damage can occur when handling the Air Bag connector. Proceed to add both steering column upper and lower cover parts to their respective locations. Limitations of the clock spring need to be done when the Ignition Switch is OFF while disconnecting the negative battery terminal for a minimum of 90 seconds. The clock spring must be turned counterclockwise by hand until firm before performing a clockwise rotation of 2.5 turns for mark alignment while maintaining the Air Bag wire harness and connectors separate from the rotation. The installation of steering wheel assembly requires a steering wheel center point check. Afterwards you can install and attach the steering pad while adding steering wheel covers to positions No.2 and No.3. Reinstall the cable onto the negative battery terminal while using 3.9 Nm (40 kgf-cm, 35 in-lbf) torque and examine the steering pad. Initialization tests may be required by certain systems after removing the cable from the negative battery terminal while the inspection of the SRS warning light completes the procedure.