How to install the crankshaft position sensor and related components on Toyota Avalon?

The installation process starts with engine oil application on the O-ring section of the sensor before sensor bolt placement where proper torque reaches 10 Nm. The crankshaft position sensor installation requires use of the bolt alongside 10 Nm (102 kgf-cm, 7 ft-lbf) torque specification. Connect the crankshaft position sensor connector as the next step. Begin with installing the cooler compressor assembly and proceed to the generator assembly. Then, install the V-ribbed belt. Complete the procedure by connecting the cable to the negative terminal of the battery although submitting the system to an initialization process might be required after cable reconnection.

How to remove the Crankshaft Position Sensor on Toyota Avalon?

The removal process of the Crankshaft Position Sensor from the 2GR-FE engine control starts with disconnecting the negative battery terminal cable but some systems might need initialization after reconnection. The procedure begins with V-ribbed belt removal followed by disintegration of the generator assembly before disconnection of the cooler compressor assembly. Finish the replacement by removing the bolt before taking out the crankshaft position sensor while disconnecting its connector.

OEM Toyota Avalon Crankshaft Position Sensor

Engine Crankshaft Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Crankshaft Position Sensors found

View related parts
Toyota Avalon Camshaft Position Sensor, Driver Side
Part Number: 90919-T5005
$102.96 MSRP: $144.53
You Save: $41.57 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Crank Position; Engine Camshaft Position Sensor, Left; Crankshaft Position Sensor; Camshaft Sensor; Cam Sensor; Sensor, Cam Position; Engine Camshaft Position Sensor
- Manufacturer Note: (L)
- Position: Driver Side
- Replaces: 9004A-19003, 90919-05060, 90919-T5002
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2005-2022 Toyota Avalon | Base, Hybrid Limited, Hybrid XLE, Hybrid XLE Plus, Hybrid XLE Premium, Hybrid XLE Touring, Limited, Touring, TRD, XL, XLE, XLE Plus, XLE Premium, XLE Touring, XLE Touring SE, XLS, XSE, XSE Nightshade | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS
View related parts
Toyota Avalon Sensor, Camshaft Position
Part Number: 90080-19014
$69.78 MSRP: $83.30
You Save: $13.52 (17%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Crank Position; Cam Position; Engine Camshaft; Crankshaft; RPM Sensor
- Replaces: 90919-05026
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2000-2004 Toyota Avalon | XL, XLS | 6 Cyl 3.0 L GAS
View related parts
Toyota Avalon Crankshaft Position Sensor
Part Number: 90919-A5004
$99.41 MSRP: $139.54
You Save: $40.13 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Crank Position; Engine Crankshaft Position Sensor; Sensor, Crankshaft Pulse; Crankshaft Sensor; Camshaft Position Sensor
- Replaces: 90919-05070
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2013-2018 Toyota Avalon | Hybrid Limited, Hybrid XLE, Hybrid XLE Plus, Hybrid XLE Premium, Hybrid XLE Touring | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota Avalon Sensor, Crank Position
Part Number: 90919-A5003
$72.15 MSRP: $101.28
You Save: $29.13 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Engine Crankshaft Position Sensor; Crankshaft Position Sensor
- Manufacturer Note: (L)
- Replaces: 90919-05057
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2005-2018 Toyota Avalon | Base, Limited, Touring, XL, XLE, XLE Plus, XLE Premium, XLE Touring, XLE Touring SE, XLS | 6 Cyl 3.5 L GAS
View related parts
Toyota Avalon Camshaft Position Sensor, Passenger Side
Part Number: 90919-05061
$124.89 MSRP: $176.80
You Save: $51.91 (30%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor, Crank Position; Engine Camshaft Position Sensor, Right; Crankshaft Position Sensor; Camshaft Sensor; Cam Sensor; Crankshaft Sensor; Sensor, Cam Position; Engine Camshaft Position Sensor
- Manufacturer Note: NO.1
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2019-2022 Toyota Avalon | Limited, Touring, TRD, XLE, XSE, XSE Nightshade | 6 Cyl 3.5 L GAS
View related parts
Toyota Avalon Crankshaft Position Sensor
Part Number: 90080-19009
$81.87 MSRP: $114.92
You Save: $33.05 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Crank Position; Engine Crankshaft Position Sensor; RPM Sensor, Engine Management; Crankshaft Sensor
- Manufacturer Note: (L)
- Replaces: 90919-05012
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1995-2004 Toyota Avalon | XL, XLS | 6 Cyl 3.0 L GAS
View related parts
Toyota Avalon Sensor, Camshaft Position
Part Number: 90919-A5007
$103.20 MSRP: $144.86
You Save: $41.66 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Crank Position; Sensor, Cam Position; Engine Camshaft Position Sensor
- Replaces: 90919-05096
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2019-2022 Toyota Avalon | Hybrid Limited, Hybrid XLE, Hybrid XSE, Hybrid XSE Nightshade, Limited, XLE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota Avalon Sensor, Crank Position
Part Number: 90919-A5006
$102.02 MSRP: $143.20
You Save: $41.18 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Engine Crankshaft Position Sensor; Crankshaft Position Sensor
- Replaces: 90919-05095
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2019-2022 Toyota Avalon | Hybrid Limited, Hybrid XLE, Hybrid XSE, Hybrid XSE Nightshade, Limited, XLE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota Avalon Crankshaft Position Sensor
Part Number: 90919-05090
$107.11 MSRP: $150.35
You Save: $43.24 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Crank Position; Engine Crankshaft Position Sensor; Crankshaft Sensor
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2019-2022 Toyota Avalon | Limited, Touring, TRD, XLE, XSE, XSE Nightshade | 6 Cyl 3.5 L GAS

Toyota Avalon Crankshaft Position Sensor

Choose genuine Crankshaft Position Sensor that pass strict quality control tests. You can trust the top quality and lasting durability. Shopping for OEM Crankshaft Position Sensor for your Toyota Avalon? Our website is your one-stop destination. We stock an extensive selection of genuine Toyota Avalon parts. The price is affordable so you can save more. It only takes minutes to browse and find the exact fit. Easily add to cart and check out fast. Our hassle-free return policy will keep you stress-free. We process orders quickly for swift delivery. Your parts will arrive faster, so you can get back on the road sooner.

Crankshaft Position Sensor is a key electronic control unit that is installed in Toyota Avalon cars to detect crank shaft position and its rotations per minute. It sends this information to the power train control module where this information is used by the module to adjust the fuel injectors and the igniter thus optimising the performance of the engine. Inductive, Hall Effects, magnetoresistive and optical type crankshaft position sensors have been installed in Avalon at different production periods. Inductive sensors do not have an energy source of their own and the Hall and magnetoresistive sensors can measure static magnetic fields. Optical sensors are prime for edge detection, but they could easily be fouled. The failure of this sensor may cause occasional start-up problems or stalling, most of these problems being work of heat, vibration or corrosion; this shows how important this sensor is in the management of engines.

Toyota Avalon Crankshaft Position Sensor Parts and Q&A

Sensor, Crank Position
90919-A5003
Q: How to install the crankshaft position sensor and related components on Toyota Avalon?
A:
The installation process starts with engine oil application on the O-ring section of the sensor before sensor bolt placement where proper torque reaches 10 Nm. The crankshaft position sensor installation requires use of the bolt alongside 10 Nm (102 kgf-cm, 7 ft-lbf) torque specification. Connect the crankshaft position sensor connector as the next step. Begin with installing the cooler compressor assembly and proceed to the generator assembly. Then, install the V-ribbed belt. Complete the procedure by connecting the cable to the negative terminal of the battery although submitting the system to an initialization process might be required after cable reconnection.
Camshaft Position Sensor, Driver Side
90919-T5005
Q: How to remove the Crankshaft Position Sensor on Toyota Avalon?
A:
The removal process of the Crankshaft Position Sensor from the 2GR-FE engine control starts with disconnecting the negative battery terminal cable but some systems might need initialization after reconnection. The procedure begins with V-ribbed belt removal followed by disintegration of the generator assembly before disconnection of the cooler compressor assembly. Finish the replacement by removing the bolt before taking out the crankshaft position sensor while disconnecting its connector.