How do you service the Clock Spring Assembly / Spiral Cable on Toyota 4Runner?

The procedure for servicing the Clock Spring Assembly / Clock Spring starts by following all instructions from the Restraint Systems Service Precautions. The negative battery terminal cable needs to be disconnected before waiting 90 seconds to avoid Air Bag deployment. Undock the steering wheel assembly while you take away steering pad and steering wheel cover lower No.2 and No.3. Proceed to remove the steering column cover lower by unscrewing the 3 attachment points before moving onto the upper steering column cover. Disconnect the clock spring connectors while protecting the Air Bag wire harness before removing the cable through disengaging its 4 claws. Install the components when front wheels point straight ahead while maintaining the turn signal switch in neutral position to protect the pin from damage. The installation of the clock spring requires four screws while you need to remove the lock pin if doing a replacement alongside connecting new connectors. The upper and lower steering column covers should be installed after adjusting the clock spring according to instructions that require a switched-off ignition and negative battery terminal disconnection for at least 90 seconds. Tighten the clock spring by rotating it counterclockwise before rotating it clockwise twice to place the marks in proper alignment while keeping away from the Air Bag wire harness. The procedure ends with assembly of the steering wheel and check on the steering wheel center point followed by reinstallation of the steering pad and both steering wheel covers before reattaching the negative battery terminal while checking the SRS warning light.

OEM Toyota 4Runner Clock Spring

Spiral Cable Clock Spring

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Clock Springs found

View related parts
Toyota 4Runner Clockspring
Part Number: 84306-07040
$247.55 MSRP: $353.45
You Save: $105.90 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Sub-Assembly, Spiral; Air Bag Clockspring
- Replaces: 84306-06070, 84306-60080, 84306-33090
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2003-2009 Toyota 4Runner | Limited, Sport, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
Toyota 4Runner Clockspring
Part Number: 84306-35011
$299.51 MSRP: $427.63
You Save: $128.12 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Sub-Assembly, Spiral; Air Bag Clockspring
- Replaces: 84306-08010, 84306-35010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1996-1998 Toyota 4Runner | Base, Limited, SR5 | 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
View related parts
Toyota 4Runner Clockspring
Part Number: 84306-30120
$299.51 MSRP: $427.63
You Save: $128.12 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Sub-Assembly, Spiral; Air Bag Clockspring
- Manufacturer Note: W(CRUISE CONTOROL)
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2000-2002 Toyota 4Runner | Base, Limited, SR5 | 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
View related parts
Toyota 4Runner Clockspring
Part Number: 84306-12070
$254.19 MSRP: $362.92
You Save: $108.73 (30%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Cable Sub-Assembly, Spiral; Air Bag Clockspring
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1999 Toyota 4Runner | Base, Limited, SR5 | 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
View related parts
Toyota 4Runner Clockspring
Part Number: 84307-35030
$460.46 MSRP: $674.81
You Save: $214.35 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Sub-Assembly, Spiral; Air Bag Clockspring
- Manufacturer Note: TRD SPORT SPECIAL EDITION&SEAT COVER MATERIAL-SYNTHETIC LEATHER
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2020-2023 Toyota 4Runner | 40th Anniversary Edition, Limited, Nightshade, SR5, SR5 Premium, Trail, TRD Off-Road, TRD Off-Road Premium, TRD Pro, TRD Sport, Venture | 6 Cyl 4.0 L GAS
View related parts
Toyota 4Runner Clockspring
Part Number: 84307-35010
$489.06 MSRP: $716.72
You Save: $227.66 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Sub-Assembly, Spiral; Air Bag Clockspring
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2010-2013 Toyota 4Runner | Limited, SR5, Trail | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
Toyota 4Runner Cable Sub-Assembly, Spiral W/Sensor
Part Number: 84307-30090
$557.05 MSRP: $816.36
You Save: $259.31 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Sub-Assembly, Spiral; Air Bag Clockspring
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2010-2019 Toyota 4Runner | Limited, SR5, SR5 Premium, Trail, TRD Off-Road, TRD Off-Road Premium, TRD Pro | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
Toyota 4Runner Clockspring
Part Number: 84307-35040
$457.73 MSRP: $670.81
You Save: $213.08 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Sub-Assembly, Spiral
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2023 Toyota 4Runner | Limited | 6 Cyl 4.0 L GAS

Toyota 4Runner Clock Spring

If you're thinking about purchasing OEM parts for your Toyota 4Runner, our website is your one-stop destination. We stock an extensive selection of genuine Toyota 4Runner Clock Spring at pocket-friendly prices. Plus, we guarantee a swift delivery and a hassle-free return policy for your convenience.

Toyota 4Runner Clock Spring Parts Questions & Experts Answers

Clockspring
84306-07040
Q: How do you service the Clock Spring Assembly / Spiral Cable on Toyota 4Runner?
A: The procedure for servicing the Clock Spring Assembly / Clock Spring starts by following all instructions from the Restraint Systems Service Precautions. The negative battery terminal cable needs to be disconnected before waiting 90 seconds to avoid Air Bag deployment. Undock the Steering Wheel assembly while you take away steering pad and steering wheel cover lower No.2 and No.3. Proceed to remove the steering column cover lower by unscrewing the 3 attachment points before moving onto the upper steering column cover. Disconnect the clock spring connectors while protecting the Air Bag wire harness before removing the cable through disengaging its 4 claws. Install the components when front wheels point straight ahead while maintaining the Turn Signal Switch in neutral position to protect the pin from damage. The installation of the clock spring requires four screws while you need to remove the lock pin if doing a replacement alongside connecting new connectors. The upper and lower steering column covers should be installed after adjusting the clock spring according to instructions that require a switched-off ignition and negative battery terminal disconnection for at least 90 seconds. Tighten the clock spring by rotating it counterclockwise before rotating it clockwise twice to place the marks in proper alignment while keeping away from the Air Bag wire harness. The procedure ends with assembly of the steering wheel and check on the steering wheel center point followed by reinstallation of the steering pad and both steering wheel covers before reattaching the negative battery terminal while checking the SRS warning light.