How to install the center Air Bag sensor assembly on 2010 Toyota Camry?

The installation of a center Air Bag sensor assembly requires both the power switch to be in the off position while disconnecting the battery cable negative (-) terminal for 90 seconds to avoid Air Bag deployment. Weld the assembly to the chassis using 3 bolts tightened at 17.5 Nm (179 kgf-cm, 13 ft-lbf). The part needs replacement when it has fallen or displays any sign of damage. The SRS wiring system must have enough space around other parts and should never experience compression. The installation process should start with checking all mounted components for proper tightness then joining the holder parts using connectors without damaging the Air Bag wire harness and making sure the water-proof sheet is correctly in position. Proceed to install the No. 1 console box duct, No. 2 console box insert front, No. 1 console box insert front, upper console panel sub-assembly, console box assembly, console box carpet, console box pocket, lower instrument panel sub-assembly, instrument panel No. 2 under cover sub-assembly, cowl side trim sub-assembly LH, front door scuff plate LH, lower instrument panel finish panel LH, cowl side trim sub-assembly RH, front door scuff plate RH, upper console rear panel sub-assembly, floor shift position indicator housing sub-assembly, shift lever knob sub-assembly, No. 2 instrument cluster finish panel garnish, and No. 1 instrument cluster finish panel garnish. After connecting the negative battery terminal with the cable perform initialization when necessary then check for the SRS warning light.

OEM 2010 Toyota Camry Air Bag Sensor

Air Bag Impact Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Air Bag Sensors found

View related parts
2010 Toyota Camry Position Sensor
Part Number: 89178-06040
$79.24 MSRP: $111.22
You Save: $31.98 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Seat Position; Front Left, Right, Left Track; Air Bag Seat Mat; Occupant Detection.; Air Bag Sensor; Occupant Sensor; Sensor; Sensor, Seat Position Air Bag
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.1 x 1.5 x 1.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89178-06040
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2010 Toyota Camry Submodels:
- Base, CE, Hybrid, LE, SE, XLE | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS
View related parts
2010 Toyota Camry Position Sensor, Passenger Side
Part Number: 89178-06030
$79.24 MSRP: $111.22
You Save: $31.98 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Seat Position; Seat Track Position Sensor, Front/Right/Left; Air Bag Seat Sensor Mat; Occupant Detection Sensor; Air Bag Sensor; Occupant Sensor; Sensor, Seat Position Air Bag
- Position: Passenger Side
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.0 x 1.6 x 1.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89178-06030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2010 Toyota Camry Submodels:
- Base, CE, Hybrid LE, Hybrid SE, Hybrid SE Nightshade, Hybrid XLE, Hybrid XSE, L, LE, SE, SE Nightshade, TRD, XLE, XSE | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS
View related parts
2010 Toyota Camry Side Impact Sensor, Center
Part Number: 89831-06010
$97.99 MSRP: $118.14
You Save: $20.15 (18%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Side Air Bag; Air Bag Impact Sensor, Center, Front; Air Bag Sensor; Side Sensor; Sensor Assembly, Side Air Bag, Passenger Side; Sensor Assembly, Side Air Bag, Driver Side
- Position: Center
- Replaces: 89831-42010
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.4 x 2.5 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89831-06010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2010 Toyota Camry Submodels:
- Base, CE, Hybrid, LE, SE, XLE | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
2010 Toyota Camry Front Impact Sensor
Part Number: 89173-09400
$97.99 MSRP: $118.14
You Save: $20.15 (18%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Set, Air Bag; Air Bag Impact Sensor, Front; Air Bag Sensor; Front Sensor; Sensor, Air Bag, Front Passenger Side; Sensor, Air Bag, Front Driver Side
- Position: Front
- Item Weight: 1.40 Pounds
- Item Dimensions: 13.3 x 11.2 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89173-09400
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2010 Toyota Camry Submodels:
- Base, CE, Hybrid, LE, SE, XLE | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
2010 Toyota Camry Front Impact Sensor
Part Number: 89173-39365
$98.46 MSRP: $118.71
You Save: $20.25 (18%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Air Bag, Front; Air Bag Impact Sensor, Front; Air Bag Sensor; Front Sensor; Sensor, Air Bag, Front Passenger Side; Sensor, Air Bag, Front Driver Side
- Position: Front
- Item Weight: 0.70 Pounds
- Item Dimensions: 4.6 x 3.1 x 2.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89173-39365
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2010 Toyota Camry Submodels:
- Base, CE, Hybrid, LE, SE, XLE | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
2010 Toyota Camry Rear Sensor
Part Number: 89831-06020
$121.84 MSRP: $172.47
You Save: $50.63 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Side Air Bag; Air Bag Impact Sensor, Rear; Air Bag Sensor; Side Impact Sensor; Side Sensor; Passenger & Driver Side Air Bag Sensor Assembly
- Position: Rear
- Replaces: 89831-33030, 89831-0R020
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.3 x 2.6 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89831-06020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2010 Toyota Camry Submodels:
- Base, CE, Hybrid, LE, SE, XLE | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
2010 Toyota Camry Position Sensor, Front Driver Side
Part Number: 89178-33050
$89.76 MSRP: $125.99
You Save: $36.23 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Seat Position; Air Bag Seat Sensor Mat, Front Left; Seat Track Position Sensor, Left; Occupant Sensor; Passenger Discriminating Sensor; Discriminating Sensor; Sensor; Sensor, Seat Position Air Bag
- Position: Front Driver Side
- Part Name Code: 89178A
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.1 x 1.6 x 1.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89178-33050
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2010 Toyota Camry Submodels:
- Base, CE, Hybrid, LE, SE, XLE | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS

2010 Toyota Camry Air Bag Sensor

Looking for affordable OEM 2010 Toyota Camry Air Bag Sensor? Explore our comprehensive catalogue of genuine 2010 Toyota Camry Air Bag Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2010 Toyota Camry Parts Questions & Experts Answers

Q: How to install the center Air Bag sensor assembly on 2010 Toyota Camry?
A: The installation of a center Air Bag sensor assembly requires both the power switch to be in the off position while disconnecting the battery cable negative (-) terminal for 90 seconds to avoid Air Bag deployment. Weld the assembly to the chassis using 3 bolts tightened at 17.5 Nm (179 kgf-cm, 13 ft-lbf). The part needs replacement when it has fallen or displays any sign of damage. The SRS wiring system must have enough space around other parts and should never experience compression. The installation process should start with checking all mounted components for proper tightness then joining the holder parts using connectors without damaging the Air Bag wire harness and making sure the water-proof sheet is correctly in position. Proceed to install the No. 1 console box duct, No. 2 console box insert front, No. 1 console box insert front, upper console panel sub-assembly, console box assembly, console box carpet, console box pocket, lower instrument panel sub-assembly, instrument panel No. 2 under cover sub-assembly, cowl side trim sub-assembly LH, front door scuff plate LH, lower instrument panel finish panel LH, cowl side trim sub-assembly RH, front door scuff plate RH, upper console rear panel sub-assembly, floor shift position indicator housing sub-assembly, shift lever knob sub-assembly, No. 2 instrument cluster finish panel garnish, and No. 1 instrument cluster finish panel garnish. After connecting the negative battery terminal with the cable perform initialization when necessary then check for the SRS warning light.