How to install the Trunk Lid Latch on 2010 Scion xD?

First secure the back door using 3 bolts while achieving a torque of 7.5 Nm (76 kgf-cm, 66 in-lbf). Next, connect the connector. You must first install the back door trim board assembly before putting on the back door inside handle. The left-hand and right-hand back door side garnish should be installed after the completion of these steps. Finish the installation through the attachment of the back door trim upper panel assembly.

OEM 2010 Scion xD Trunk Lid Latch

Luggage Compartment Door Lock Assembly

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Trunk Lid Latch found

View related parts
2010 Scion xD Gate Lock, Rear
Part Number: 69350-28151
$174.01 MSRP: $246.33
You Save: $72.32 (30%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Lock Assembly, Back Door; Liftgate Latch; Tailgate Lock Actuator; Trunk Lock Actuator; Door Lock Actuator; Lock Actuator; Lock Assembly; Lock; Lock Assembly, Back Door, W/Courtesy Lamp Switch
- Manufacturer Note: KOREA SPEC
- Position: Rear
- Replaces: 69350-28150
- Part Name Code: 69350P
- Item Weight: 1.90 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 69350-28151
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2010 Scion xD Submodels:
- Base | 4 Cyl 1.8 L GAS

2010 Scion xD Trunk Lid Latch

Looking for affordable OEM 2010 Scion xD Trunk Lid Latch? Explore our comprehensive catalogue of genuine 2010 Scion xD Trunk Lid Latch. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2010 Scion xD Parts Questions & Experts Answers

Q: How to install the Trunk Lid Latch on 2010 Scion xD?
A: First secure the back door using 3 bolts while achieving a torque of 7.5 Nm (76 kgf-cm, 66 in-lbf). Next, connect the connector. You must first install the back door trim board assembly before putting on the back door inside handle. The left-hand and right-hand back door side garnish should be installed after the completion of these steps. Finish the installation through the attachment of the back door trim upper panel assembly.