How to remove the Trunk Lid Latch on Scion xD?

The first step to unlock a back door involves removing the back door trim upper panel assembly and next the back door side garnish from the left-hand and right-hand sides followed by the back door inside handle and trim board assembly. After disconnecting the connector and removing the three bolts securing the back door lock the lock can be detached. The back door inside handle and back door trim board assembly become the next items to remove from the sequence. The last step requires you to disconnect the connector then separate the back door lock by taking out its mounting bolts.

OEM Scion xD Trunk Lid Latch

Luggage Compartment Door Lock Assembly

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Trunk Lid Latch found

View related parts
Scion xD Gate Lock, Rear
Part Number: 69350-28151
$174.01 MSRP: $246.33
You Save: $72.32 (30%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Lock Assembly, Back Door; Liftgate Latch; Tailgate Lock Actuator; Trunk Lock Actuator; Door Lock Actuator; Lock Actuator; Lock Assembly; Lock; Lock Assembly, Back Door, W/Courtesy Lamp Switch
- Manufacturer Note: KOREA SPEC
- Position: Rear
- Replaces: 69350-28150
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2008-2014 Scion xD | Base | 4 Cyl 1.8 L GAS

Scion xD Trunk Lid Latch

If you're thinking about purchasing OEM parts for your Scion xD, our website is your one-stop destination. We stock an extensive selection of genuine Scion xD Trunk Lid Latch at pocket-friendly prices. Plus, we guarantee a swift delivery and a hassle-free return policy for your convenience.

Scion xD Trunk Lid Latch Parts Questions & Experts Answers

Gate Lock, Rear
69350-28151
Q: How to remove the Trunk Lid Latch on Scion xD?
A: The first step to unlock a back door involves removing the back door trim upper panel assembly and next the back door side garnish from the left-hand and right-hand sides followed by the back door inside handle and trim board assembly. After disconnecting the connector and removing the three bolts securing the back Door Lock the lock can be detached. The back door inside handle and back door trim board assembly become the next items to remove from the sequence. The last step requires you to disconnect the connector then separate the back door lock by taking out its mounting bolts.