How to service the spark plugs on 2010 Scion xD?

Start the 2ZR-FE spark plug service by taking out the No. 2 cylinder head cover by lifting the rear side first to free each of the 2 fittings so that after lifting the front you can completely remove the cover while keeping the rubber grommets on it. If any grommets stick to bolts you should move them to the cover. The service procedure starts with disconnecting the camshaft timing oil control valve connector as well as all 4 ignition coil connectors. After that you must remove the 4 bolts and the 4 ignition coils. Finally, remove the 4 spark plugs.

OEM 2010 Scion xD Spark Plug

Ignition Spark Plug

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Spark Plug found

View related parts
2010 Scion xD Plug, Spark
Part Number: 90919-01275
$13.85 MSRP: $19.28
You Save: $5.43 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Spark Plug
- Replaces: 90919-01253
- Part Name Code: 19100P
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.7 x 1.1 x 0.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 4
- SKU: 90919-01275
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2010 Scion xD Submodels:
- Base | 4 Cyl 1.8 L GAS

2010 Scion xD Spark Plug

Looking for affordable OEM 2010 Scion xD Spark Plug? Explore our comprehensive catalogue of genuine 2010 Scion xD Spark Plug. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2010 Scion xD Spark Plug Parts Q&A

Q: How to service the spark plugs on 2010 Scion xD?
A: Start the 2ZR-FE spark plug service by taking out the No. 2 cylinder head cover by lifting the rear side first to free each of the 2 fittings so that after lifting the front you can completely remove the cover while keeping the rubber grommets on it. If any grommets stick to bolts you should move them to the cover. The service procedure starts with disconnecting the camshaft timing oil control valve connector as well as all 4 ignition coil connectors. After that you must remove the 4 bolts and the 4 ignition coils. Finally, remove the 4 spark plugs.