How to replace the Oxygen Sensor on 2010 Scion xD?

The process to remove the air fuel ratio sensor from the 2ZR-FE engine control system begins with front wiper arm head cap removal followed by taking apart both left and right front wiper arm assembly. The service begins with hood to cowl top seal detachment followed by removal of cowl top ventilator louvers on right-side and left-side positions. Carefully remove the front wiper motor together with its link before moving on to the front air shutter seal located on the right side. The technician should start by taking off the cowl top panel outer and then follow with removal of the No. 2 cylinder head cover. Last and first steps require a disconnected air fuel ratio sensor connector as well as clamp followed by usage of Special Service Tool: 09224-00010 to extract the air fuel ratio sensor.

OEM 2010 Scion xD Oxygen Sensor

Oxygen O2 Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Oxygen Sensors found

View related parts
2010 Scion xD Oxygen Sensor, Front
Part Number: 89467-02070
$208.52 MSRP: $297.73
You Save: $89.21 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Air Fuel Rat; Oxygen Sensor, Front; Air / Fuel Ratio Sensor; Air-Fuel Ratio Sensor; Air/Fuel Sensor; Front Oxygen Sensor; Upper Oxygen Sensor; Sensor, Air Fuel Ratio
- Manufacturer Note: (L)
- Position: Front
- Part Name Code: 89467B
- Item Weight: 0.70 Pounds
- Item Dimensions: 2.2 x 2.1 x 6.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89467-02070
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2010 Scion xD Submodels:
- Base | 4 Cyl 1.8 L GAS
View related parts
2010 Scion xD Oxygen Sensor, Rear
Part Number: 89465-52500
$129.94 MSRP: $183.95
You Save: $54.01 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Oxygen; Oxygen Sensor, Rear; Rear Oxygen Sensor
- Position: Rear
- Part Name Code: 89465
- Item Weight: 0.90 Pounds
- Item Dimensions: 7.3 x 3.5 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89465-52500
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2010 Scion xD Submodels:
- Base | 4 Cyl 1.8 L GAS

2010 Scion xD Oxygen Sensor

Looking for affordable OEM 2010 Scion xD Oxygen Sensor? Explore our comprehensive catalogue of genuine 2010 Scion xD Oxygen Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2010 Scion xD Oxygen Sensor Parts Q&A

Q: How to replace the Oxygen Sensor on 2010 Scion xD?
A: The process to remove the air fuel ratio sensor from the 2ZR-FE engine control system begins with front wiper arm head cap removal followed by taking apart both left and right front wiper arm assembly. The service begins with hood to cowl top seal detachment followed by removal of cowl top ventilator louvers on right-side and left-side positions. Carefully remove the front wiper motor together with its link before moving on to the front air shutter seal located on the right side. The technician should start by taking off the cowl top panel outer and then follow with removal of the No. 2 cylinder head cover. Last and first steps require a disconnected air fuel ratio sensor connector as well as clamp followed by usage of Special Service Tool: 09224-00010 to extract the air fuel ratio sensor.