Other Name: Plate, Back Door Name; Hatch Emblem, Rear; Plate, Luggage Compartment Door Name
Manufacturer Note: YARIS
Position: Rear
Part Name Code: 75442
Item Weight: 0.50 Pounds
Condition: New
Fitment Type: Direct Replacement
SKU: 75442-52210
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2009 Toyota Yaris Submodels:
Base, S | 4 Cyl 1.5 L GAS
2009 Toyota Yaris Emblem
Looking for affordable OEM 2009 Toyota Yaris Emblem? Explore our comprehensive catalogue of genuine 2009 Toyota Yaris Emblem. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2009 Toyota Yaris Emblem Parts Q&A
Q: How to remove the exterior Emblem for the hatchback on 2009 Toyota Yaris?
A: The first step to remove the hatchback exterior name plate requires users to disconnect the negative cable from the battery terminal while operating with fog lights. The front bumper cover should be removed with protective tape before users detach 8 screws and 2 screw grommets then pop off 7 clips. The tool requires protective tape on a screwdriver tip for disconnecting two fog light connectors after removing 6 claws from the front bumper assembly. Models without fog lights require users to just detach their 6 claws before removing the front bumper. Using a pair of pliers remove the radiator grille emblem by disconnecting its 4 holding claws. Installation of the Sport Package requires users to detach the 2 screws and radiator grille name plate retainer while they disengage 2 claws to extract the No. 2 emblem from the grille. You can remove the symbol emblem by first applying protective tape to the back door panel area around the emblem then heating the emblem with an infrared light to 40-60 degrees Celsius (104-140 degrees Fahrenheit) for one to two minutes followed by using a gasket scraper with wrapped protective tape tip to peel the adhesive surface. Afterward, remove the protective tape. Apply protective tape then heat the No. 1 and No. 2 luggage compartment door name plates before using a gasket scraper and properly removing the protective tape from each plate after removal.